The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 2.4 is in the grey area. This implies that the company is under some kind of financial stress. If it is below 1.8, the company may face bankruptcy risk.
PT Steel Pipe Industry of Indonesia Tbk has a Altman Z-Score of 2.38, indicating it is in Grey Zones. This implies that PT Steel Pipe Industry of Indonesia Tbk is in some kind of financial stress. If it is below 1.81, the company may face bankrupcy risk.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
PT Steel Pipe Industry of Indonesia Tbk (FRA:S08) Altman Z-Score Explanation
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
PT Steel Pipe Industry of Indonesia Tbk Altman Z-Score Chart
PT Steel Pipe Industry of Indonesia Tbk Annual Data
FRA:S08 vs NUE, STLD, RS: Altman Z-Score Comparison
For the Steel subindustry, PT Steel Pipe Industry of Indonesia Tbk's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
PT Steel Pipe Industry of Indonesia Tbk Altman Z-Score vs Steel Industry
PT Steel Pipe Industry of Indonesia Tbk Altman Z-Score Calculation
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
PT Steel Pipe Industry of Indonesia Tbk (FRA:S08) has a Altman Z-Score of 2.38 as of Jul. 01, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on PT Steel Pipe Industry of Indonesia Tbk and its competitors. This is 29% above median its historical median of 1.85. Over the past decade, PT Steel Pipe Industry of Indonesia Tbk's Altman Z-Score has ranged from 1.13 to 2.68. According to the industry distribution chart, PT Steel Pipe Industry of Indonesia Tbk ranks #314 out of 609 companies in the Steel industry, placing it in the top 51.6%.
Is PT Steel Pipe Industry of Indonesia Tbk's Altman Z-Score too high?
PT Steel Pipe Industry of Indonesia Tbk's current Altman Z-Score of 2.38 is 29% above median its 10-year median of 1.85. Over the past 10 years, this metric has ranged from a low of 1.13 to a high of 2.68. The Steel industry median Altman Z-Score is 2.45. PT Steel Pipe Industry of Indonesia Tbk's value of 2.38 is 2.9% below this industry median. Based on the distribution chart, PT Steel Pipe Industry of Indonesia Tbk ranks #314 out of 609 companies in the Steel industry, which is below the industry midpoint. Overall, PT Steel Pipe Industry of Indonesia Tbk has a GF Score™ of 73/100, reflecting its overall financial health beyond just this single metric.
How does PT Steel Pipe Industry of Indonesia Tbk's Altman Z-Score compare to NUE and STLD?
According to the Steel industry distribution chart, PT Steel Pipe Industry of Indonesia Tbk ranks #314 out of 609 companies for Altman Z-Score. This places PT Steel Pipe Industry of Indonesia Tbk in the lower half of its industry. The industry median Altman Z-Score is 2.45. PT Steel Pipe Industry of Indonesia Tbk's value of 2.38 is 2.9% below this benchmark. Historically, PT Steel Pipe Industry of Indonesia Tbk's own Altman Z-Score has ranged from 1.13 to 2.68 over the past decade. While the company's 10-year median is 1.85 vs. the industry median of 2.45, PT Steel Pipe Industry of Indonesia Tbk has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for a Steel company?
The median Altman Z-Score among Steel companies is 2.45, based on 609 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. PT Steel Pipe Industry of Indonesia Tbk's current Altman Z-Score of 2.38 is 2.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on PT Steel Pipe Industry of Indonesia Tbk and its competitors. For the Steel industry, the median Altman Z-Score is 2.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. PT Steel Pipe Industry of Indonesia Tbk's current Altman Z-Score is 2.38, which is 29% above median its own 10-year median of 1.85. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is PT Steel Pipe Industry of Indonesia Tbk stock overvalued right now?
PT Steel Pipe Industry of Indonesia Tbk (FRA:S08) has a current Altman Z-Score of 2.38. The stock's GF Value™ is €0.01, compared to a current price of €0.01 — trading 40% above its estimated fair value. The current Altman Z-Score is 2.38, which is 29% above median its 10-year median of 1.85 and 2.9% below the Steel industry median of 2.45. PT Steel Pipe Industry of Indonesia Tbk's overall GF Score™ is 73/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For PT Steel Pipe Industry of Indonesia Tbk (FRA:S08), the current Altman Z-Score is 2.38 as of Jul. 01, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is PT Steel Pipe Industry of Indonesia Tbk (FRA:S08) Overvalued in 2026?
Based on GuruFocus' analysis, PT Steel Pipe Industry of Indonesia Tbk stock appears to be overvalued.
The current stock price of €0.01 is trading 40% above its estimated GF Value™ of €0.01.
Key valuation signals for FRA:S08:
Altman Z-Score: 2.38 (29% above median its 10-year median of 1.85)
GF Value™: €0.01 vs. price of €0.01 (40% above fair value)
Industry Position: 2.9% below the Steel median (#314 of 609)
No single metric tells the full story. See the FRA:S08 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
PT Steel Pipe Industry of Indonesia Tbk Business Description
PT Steel Pipe Industry of Indonesia Tbk is an Indonesian-based company engaged in manufacturing steel pipes. The company's products include black pipes, water pipes, mechanical pipes, furniture pipes, API pipes, steel poles, spiral pipes, as well as industrial and ornamental stainless steel pipes. The segments of the company are Steel Pipe Mill, Spiral Steel Pipe Mill, Strips and Plate, Services, and others. The company's products are used for furniture, water supply systems, general construction, automotive components, oil and gas, mechanical structures, and chemical industries. Geographically, all operations functioned through the regions of Indonesia.
73GF Score
Get the complete analysis for FRA:S08
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:S08 has been successfully added to your 
