Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Gencor IndustriesGENC -0.05%95 PEG Ratio is 0.62 as of Aug. 22, 2026, which is 41% above its 10-year median of 0.44. GuruFocus rates GENC with a GF Score™ of 95/100 and a GF Value™ of $15.97 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 105 Farm & Heavy Construction Machinery companies, Gencor Industries ranks better than 78.1% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Gencor Industries's PEG Ratio or its related term are showing as below:
GENC'
s PEG Ratio Range Over the Past 10 Years
Min: 0.25 Med: 0.44 Max: 7.5
Current: 0.62
During the past 13 years, Gencor Industries's highest PEG Ratio was 7.50. The lowest was 0.25. And the median was 0.44.
Gencor Industries (AMEX:GENC) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Gencor Industries PEG Ratio Related Terms
Gencor Industries PEG Ratio Historical Data
* Premium members only.
The historical data trend for Gencor Industries's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Farm & Heavy Construction Machinery subindustry, Gencor Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Gencor Industries PEG Ratio vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, Gencor Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Gencor Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Gencor Industries (GENC) has a PEG Ratio of 0.62 as of Aug. 22, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Gencor Industries and its competitors. This is 41% above median its historical median of 0.44. Over the past decade, Gencor Industries' PEG Ratio has ranged from 0.25 to 7.50. According to the industry distribution chart, Gencor Industries ranks #23 out of 105 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 21.9%.
Is Gencor Industries' PEG Ratio too high?
Gencor Industries' current PEG Ratio of 0.62 is 41% above median its 10-year median of 0.44. Over the past 10 years, this metric has ranged from a low of 0.25 to a high of 7.50. The Farm & Heavy Construction Machinery industry median PEG Ratio is 1.06. Gencor Industries' value of 0.62 is 41.5% below this industry median. Based on the distribution chart, Gencor Industries ranks #23 out of 105 companies in the Farm & Heavy Construction Machinery industry, which is in the top quartile — a strong position relative to peers. Overall, Gencor Industries has a GF Score™ of 95/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Gencor Industries' PEG Ratio compare to BNC and XOS?
According to the Farm & Heavy Construction Machinery industry distribution chart, Gencor Industries ranks #23 out of 105 companies for PEG Ratio. This places Gencor Industries in the top 22% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.06. Gencor Industries' value of 0.62 is 41.5% below this benchmark. Historically, Gencor Industries' own PEG Ratio has ranged from 0.25 to 7.50 over the past decade. While the company's 10-year median is 0.44 vs. the industry median of 1.06, Gencor Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Farm & Heavy Construction Machinery company?
The median PEG Ratio among Farm & Heavy Construction Machinery companies is 1.06, based on 105 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Gencor Industries's current PEG Ratio of 0.62 is 41.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Gencor Industries and its competitors. For the Farm & Heavy Construction Machinery industry, the median PEG Ratio is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Gencor Industries's current PEG Ratio is 0.62, which is 41% above median its own 10-year median of 0.44. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Gencor Industries stock overvalued right now?
Based on GuruFocus' analysis, Gencor Industries (GENC) is currently considered Modestly Overvalued. The stock's GF Value™ is $15.97, compared to a current price of $19.02 — trading 19.1% above its estimated fair value. The current PEG Ratio is 0.62, which is 41% above median its 10-year median of 0.44 and 41.5% below the Farm & Heavy Construction Machinery industry median of 1.06. Gencor Industries' overall GF Score™ is 95/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Gencor Industries (GENC), the current PEG Ratio is 0.62 as of Aug. 22, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Gencor Industries (GENC) Overvalued in 2026?
Based on GuruFocus' analysis, Gencor Industries stock appears to be overvalued.
The current stock price of $19.02 is trading 19.1% above its estimated GF Value™ of $15.97.
GuruFocus considers Gencor Industries to be Modestly Overvalued.
Key valuation signals for GENC:
PEG Ratio: 0.62 (41% above median its 10-year median of 0.44)
GF Value™: $15.97 vs. price of $19.02 (19.1% above fair value)
Industry Position: 41.5% below the Farm & Heavy Construction Machinery median (#23 of 105)
No single metric tells the full story. See the GENC stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Gencor Industries Inc and its subsidiaries are a manufacturer of heavy machinery used in the production of highway construction materials and environmental control equipment. The Company's products are manufactured in the United States and sold through a combination of Company sales representatives and independent dealers and agents. The Company has one reporting segment, equipment for the highway construction industry. The Company's principal core products include asphalt pavers, hot mix asphalt plants, combustion systems, and fluid heat transfer systems. It operates in the United States, Canada, and other foreign countries, with the majority of revenue coming from the United States.
95GF Score
Get the complete analysis for GENC
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
GENC has been successfully added to your 
