Minebea MitsumiMINBY -10.75%61 PEG Ratio is 1.35 as of Jun. 28, 2026, which is 21% below its 10-year median of 1.71. GuruFocus rates MINBY with a GF Score™ of 61/100 and a GF Value™ of $20.08 (Significantly Overvalued). The stock has 8 warning signs investors should review. Among 859 Hardware companies, Minebea Mitsumi ranks better than 62.05% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Minebea Mitsumi's PEG Ratio or its related term are showing as below:
MINBY'
s PEG Ratio Range Over the Past 10 Years
Min: 0.28 Med: 1.71 Max: 6.93
Current: 1.41
During the past 13 years, Minebea Mitsumi's highest PEG Ratio was 6.93. The lowest was 0.28. And the median was 1.71.
MINBY's PEG Ratio is ranked better than 62.05% of 859
companies
in the Hardware industry
Industry Median: 2.27
vs MINBY: 1.41
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Minebea Mitsumi (OTCPK:MINBY) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Minebea Mitsumi PEG Ratio Related Terms
Minebea Mitsumi PEG Ratio Historical Data
* Premium members only.
The historical data trend for Minebea Mitsumi's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Minebea Mitsumi's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Minebea Mitsumi PEG Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Minebea Mitsumi's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Minebea Mitsumi's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Minebea Mitsumi (MINBY) has a PEG Ratio of 1.35 as of Jun. 28, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Minebea Mitsumi and its competitors. This is 21% below median its historical median of 1.71. Over the past decade, Minebea Mitsumi's PEG Ratio has ranged from 0.28 to 6.93. According to the industry distribution chart, Minebea Mitsumi ranks #326 out of 859 companies in the Hardware industry, placing it in the top 38%.
Is Minebea Mitsumi's PEG Ratio too high?
Minebea Mitsumi's current PEG Ratio of 1.35 is 21% below median its 10-year median of 1.71. Over the past 10 years, this metric has ranged from a low of 0.28 to a high of 6.93. The Hardware industry median PEG Ratio is 2.27. Minebea Mitsumi's value of 1.35 is 40.5% below this industry median. Based on the distribution chart, Minebea Mitsumi ranks #326 out of 859 companies in the Hardware industry, which is above the industry midpoint. Overall, Minebea Mitsumi has a GF Score™ of 61/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Minebea Mitsumi's PEG Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, Minebea Mitsumi ranks #326 out of 859 companies for PEG Ratio. This puts Minebea Mitsumi in the upper half of its industry. The industry median PEG Ratio is 2.27. Minebea Mitsumi's value of 1.35 is 40.5% below this benchmark. Historically, Minebea Mitsumi's own PEG Ratio has ranged from 0.28 to 6.93 over the past decade. While the company's 10-year median is 1.71 vs. the industry median of 2.27, Minebea Mitsumi has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Hardware company?
The median PEG Ratio among Hardware companies is 2.27, based on 859 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Minebea Mitsumi's current PEG Ratio of 1.35 is 40.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Minebea Mitsumi and its competitors. For the Hardware industry, the median PEG Ratio is 2.27 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Minebea Mitsumi's current PEG Ratio is 1.35, which is 21% below median its own 10-year median of 1.71. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Minebea Mitsumi stock overvalued right now?
Based on GuruFocus' analysis, Minebea Mitsumi (MINBY) is currently considered Significantly Overvalued. The stock's GF Value™ is $20.08, compared to a current price of $29.80 — trading 48.4% above its estimated fair value. The current PEG Ratio is 1.35, which is 21% below median its 10-year median of 1.71 and 40.5% below the Hardware industry median of 2.27. Minebea Mitsumi's overall GF Score™ is 61/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Minebea Mitsumi (MINBY), the current PEG Ratio is 1.35 as of Jun. 28, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Minebea Mitsumi (MINBY) Overvalued in 2026?
Based on GuruFocus' analysis, Minebea Mitsumi stock appears to be overvalued.
The current stock price of $29.80 is trading 48.4% above its estimated GF Value™ of $20.08.
GuruFocus considers Minebea Mitsumi to be Significantly Overvalued.
Key valuation signals for MINBY:
PEG Ratio: 1.35 (21% below median its 10-year median of 1.71)
GF Value™: $20.08 vs. price of $29.80 (48.4% above fair value)
Industry Position: 40.5% below the Hardware median (#326 of 859)
No single metric tells the full story. See the MINBY stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Minebea Mitsumi Inc is an electronic components company. The company operates through four segments. The Access Solutions segment handles automotive parts such as key sets, door latches, and handles, as well as industrial equipment parts. The Motor Lighting & Sensing segment offers small motors, electronic devices, optical components, sensing devices, and specialized equipment. The Precision Technologies segment focuses on ultra-precision machined parts, including bearings, pivot assemblies, and aircraft screws. The Semiconductor & Electronics segment provides semiconductor devices, optical devices, mechanical components, power supply components, and smart products. It generates the majority of its revenue from the Semiconductor & Electronics segment.
61GF Score
Get the complete analysis for MINBY
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MINBY has been successfully added to your 
