Chuo Malleable Iron CoNGO:5607 +0.16%71 PEG Ratio is 0.82 as of Jul. 08, 2026, which is 27% below its 10-year median of 1.13. GuruFocus rates NGO:5607 with a GF Score™ of 71/100 and a GF Value™ of 円542.35 (Modestly Overvalued). The stock has 1 warning sign investors should review. Among 671 Vehicles & Parts companies, Chuo Malleable Iron Co ranks better than 61.85% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Chuo Malleable Iron Co's PEG Ratio or its related term are showing as below:
NGO:5607'
s PEG Ratio Range Over the Past 10 Years
Min: 0.65 Med: 1.13 Max: 5.45
Current: 0.82
During the past 13 years, Chuo Malleable Iron Co's highest PEG Ratio was 5.45. The lowest was 0.65. And the median was 1.13.
NGO:5607's PEG Ratio is ranked better than 61.85% of 671
companies
in the Vehicles & Parts industry
Industry Median: 1.17
vs NGO:5607: 0.82
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Chuo Malleable Iron Co (NGO:5607) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Chuo Malleable Iron Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Chuo Malleable Iron Co PEG Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Chuo Malleable Iron Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Chuo Malleable Iron Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Chuo Malleable Iron Co (NGO:5607) has a PEG Ratio of 0.82 as of Jul. 08, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Chuo Malleable Iron Co and its competitors. This is 27% below median its historical median of 1.13. Over the past decade, Chuo Malleable Iron Co's PEG Ratio has ranged from 0.65 to 5.45. According to the industry distribution chart, Chuo Malleable Iron Co ranks #256 out of 671 companies in the Vehicles & Parts industry, placing it in the top 38.2%.
Is Chuo Malleable Iron Co's PEG Ratio too high?
Chuo Malleable Iron Co's current PEG Ratio of 0.82 is 27% below median its 10-year median of 1.13. Over the past 10 years, this metric has ranged from a low of 0.65 to a high of 5.45. The Vehicles & Parts industry median PEG Ratio is 1.17. Chuo Malleable Iron Co's value of 0.82 is 29.9% below this industry median. Based on the distribution chart, Chuo Malleable Iron Co ranks #256 out of 671 companies in the Vehicles & Parts industry, which is above the industry midpoint. Overall, Chuo Malleable Iron Co has a GF Score™ of 71/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Chuo Malleable Iron Co's PEG Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Chuo Malleable Iron Co ranks #256 out of 671 companies for PEG Ratio. This puts Chuo Malleable Iron Co in the upper half of its industry. The industry median PEG Ratio is 1.17. Chuo Malleable Iron Co's value of 0.82 is 29.9% below this benchmark. Historically, Chuo Malleable Iron Co's own PEG Ratio has ranged from 0.65 to 5.45 over the past decade. While the company's 10-year median is 1.13 vs. the industry median of 1.17, Chuo Malleable Iron Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Vehicles & Parts company?
The median PEG Ratio among Vehicles & Parts companies is 1.17, based on 671 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Chuo Malleable Iron Co's current PEG Ratio of 0.82 is 29.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Chuo Malleable Iron Co and its competitors. For the Vehicles & Parts industry, the median PEG Ratio is 1.17 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Chuo Malleable Iron Co's current PEG Ratio is 0.82, which is 27% below median its own 10-year median of 1.13. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Chuo Malleable Iron Co stock overvalued right now?
Based on GuruFocus' analysis, Chuo Malleable Iron Co (NGO:5607) is currently considered Modestly Overvalued. The stock's GF Value™ is 円542.35, compared to a current price of 円616.00 — trading 13.6% above its estimated fair value. The current PEG Ratio is 0.82, which is 27% below median its 10-year median of 1.13 and 29.9% below the Vehicles & Parts industry median of 1.17. Chuo Malleable Iron Co's overall GF Score™ is 71/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Chuo Malleable Iron Co (NGO:5607), the current PEG Ratio is 0.82 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Chuo Malleable Iron Co (NGO:5607) Overvalued in 2026?
Based on GuruFocus' analysis, Chuo Malleable Iron Co stock appears to be overvalued.
The current stock price of 円616.00 is trading 13.6% above its estimated GF Value™ of 円542.35.
GuruFocus considers Chuo Malleable Iron Co to be Modestly Overvalued.
Key valuation signals for NGO:5607:
PEG Ratio: 0.82 (27% below median its 10-year median of 1.13)
GF Value™: 円542.35 vs. price of 円616.00 (13.6% above fair value)
Industry Position: 29.9% below the Vehicles & Parts median (#256 of 671)
No single metric tells the full story. See the NGO:5607 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Chuo Malleable Iron Co Ltd is engaged in the manufacture and sale of malleable iron castings, ductile iron castings, plain iron castings, light alloy castings, and aluminum die castings. Its products are used in automobiles, industrial vehicles, industrial machinery, industrial robots, and water and gas supply parts. The company has two segments: Malleable Business, which manufactures and sells automotive parts, industrial vehicle parts, and industrial robot parts, and Metal Furniture Business, which manufactures and sells various types of chairs for offices and facilities.
71GF Score
Get the complete analysis for NGO:5607
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NGO:5607 has been successfully added to your 
