OkumaNGO:6103 86 PEG Ratio is 1.10 as of Jul. 07, 2026, which is 59% above its 10-year median of 0.69. GuruFocus rates NGO:6103 with a GF Score™ of 86/100 and a GF Value™ of 円2,742.29. The stock has 5 warning signs investors should review. Among 1,280 Industrial Products companies, Okuma ranks better than 56.48% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, Okuma's PE Ratio without NRI is 17.65. Okuma's 5-Year EBITDA growth rate is 16.00%. Therefore, Okuma's PEG Ratio for today is 1.10.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Okuma's PEG Ratio or its related term are showing as below:
NGO:6103'
s PEG Ratio Range Over the Past 10 Years
Min: 0.4 Med: 0.69 Max: 16.04
Current: 1.55
During the past 13 years, Okuma's highest PEG Ratio was 16.04. The lowest was 0.40. And the median was 0.69.
NGO:6103's PEG Ratio is ranked better than 56.48% of 1280
companies
in the Industrial Products industry
Industry Median: 1.88
vs NGO:6103: 1.55
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Okuma (NGO:6103) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Okuma PEG Ratio Related Terms
Okuma PEG Ratio Historical Data
* Premium members only.
The historical data trend for Okuma's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Okuma's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Okuma PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Okuma's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Okuma's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Okuma (NGO:6103) has a PEG Ratio of 1.10 as of Jul. 07, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Okuma and its competitors. This is 59% above median its historical median of 0.69. Over the past decade, Okuma's PEG Ratio has ranged from 0.40 to 16.04. According to the industry distribution chart, Okuma ranks #557 out of 1280 companies in the Industrial Products industry, placing it in the top 43.5%.
Is Okuma's PEG Ratio too high?
Okuma's current PEG Ratio of 1.10 is 59% above median its 10-year median of 0.69. Over the past 10 years, this metric has ranged from a low of 0.40 to a high of 16.04. The Industrial Products industry median PEG Ratio is 1.88. Okuma's value of 1.10 is 41.5% below this industry median. Based on the distribution chart, Okuma ranks #557 out of 1280 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Okuma has a GF Score™ of 86/100, reflecting its overall financial health beyond just this single metric.
How does Okuma's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Okuma ranks #557 out of 1280 companies for PEG Ratio. This puts Okuma in the upper half of its industry. The industry median PEG Ratio is 1.88. Okuma's value of 1.10 is 41.5% below this benchmark. Historically, Okuma's own PEG Ratio has ranged from 0.40 to 16.04 over the past decade. While the company's 10-year median is 0.69 vs. the industry median of 1.88, Okuma has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.88, based on 1,280 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Okuma's current PEG Ratio of 1.10 is 41.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Okuma and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.88 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Okuma's current PEG Ratio is 1.10, which is 59% above median its own 10-year median of 0.69. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Okuma stock overvalued right now?
Okuma (NGO:6103) has a current PEG Ratio of 1.10. The stock's GF Value™ is 円2,742.29, compared to a current price of 円3,525.00 — trading 28.5% above its estimated fair value. The current PEG Ratio is 1.10, which is 59% above median its 10-year median of 0.69 and 41.5% below the Industrial Products industry median of 1.88. Okuma's overall GF Score™ is 86/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Okuma (NGO:6103), the current PEG Ratio is 1.10 as of Jul. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Okuma (NGO:6103) Overvalued in 2026?
Based on GuruFocus' analysis, Okuma stock appears to be overvalued.
The current stock price of 円3,525.00 is trading 28.5% above its estimated GF Value™ of 円2,742.29.
Key valuation signals for NGO:6103:
PEG Ratio: 1.10 (59% above median its 10-year median of 0.69)
GF Value™: 円2,742.29 vs. price of 円3,525.00 (28.5% above fair value)
Industry Position: 41.5% below the Industrial Products median (#557 of 1280)
No single metric tells the full story. See the NGO:6103 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Okuma Corp is a Japan-based company that manufactures machine tools. The company's product portfolio comprises CNC lathes, aluminum wheel applications, horizontal multitasking machines, machining centers, and so on. In addition, the company provides other solutions including applications, system technologies, aftersales services, and others. The company has a number of subsidiaries overseas, including Okuma America Corp. (America), Okuma Europe GmbH (Germany), Okuma Machine Tool (Shanghai) Co., Ltd (China), BYJC Okuma (Beijing) Machine Tool Co., Ltd (China) and Tatung-Okuma Co., Ltd (Taiwan). In the domestic market, the company primarily operates through Nippon Seiki Shokai and Okuma Kosan Corp. The company generates around half of its revenue from overseas markets.
86GF Score
Get the complete analysis for NGO:6103
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NGO:6103 has been successfully added to your 
