JSW SteelNSE:JSWSTEEL -2.16%88 PEG Ratio is 5.04 as of Jul. 08, 2026, which is 320% above its 10-year median of 1.20. GuruFocus rates NSE:JSWSTEEL with a GF Score™ of 88/100 and a GF Value™ of ₹1,039.60 (Modestly Overvalued). The stock has 8 warning signs investors should review. Among 200 Steel companies, JSW Steel ranks worse than 81.5% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, JSW Steel's PE Ratio without NRI is 40.82. JSW Steel's 5-Year EBITDA growth rate is 8.10%. Therefore, JSW Steel's PEG Ratio for today is 5.04.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for JSW Steel's PEG Ratio or its related term are showing as below:
NSE:JSWSTEEL'
s PEG Ratio Range Over the Past 10 Years
Min: 0.27 Med: 1.2 Max: 12.5
Current: 5.04
During the past 13 years, JSW Steel's highest PEG Ratio was 12.50. The lowest was 0.27. And the median was 1.20.
NSE:JSWSTEEL's PEG Ratio is ranked worse than 81.5% of 200
companies
in the Steel industry
Industry Median: 1.4
vs NSE:JSWSTEEL: 5.04
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
JSW Steel (NSE:JSWSTEEL) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
JSW Steel PEG Ratio Related Terms
JSW Steel PEG Ratio Historical Data
* Premium members only.
The historical data trend for JSW Steel's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:JSWSTEEL vs NUE, STLD, RS: PEG Ratio Comparison
For the Steel subindustry, JSW Steel's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
JSW Steel PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, JSW Steel's PEG Ratio distribution charts can be found below:
* The bar in red indicates where JSW Steel's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
JSW Steel (NSE:JSWSTEEL) has a PEG Ratio of 5.04 as of Jul. 08, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on JSW Steel and its competitors. This is 320% above median its historical median of 1.20. Over the past decade, JSW Steel's PEG Ratio has ranged from 0.27 to 12.50. According to the industry distribution chart, JSW Steel ranks #163 out of 200 companies in the Steel industry, placing it in the top 81.5%.
Is JSW Steel's PEG Ratio too high?
JSW Steel's current PEG Ratio of 5.04 is 320% above median its 10-year median of 1.20. Over the past 10 years, this metric has ranged from a low of 0.27 to a high of 12.50. The Steel industry median PEG Ratio is 1.40. JSW Steel's value of 5.04 is 260% above this industry median. Based on the distribution chart, JSW Steel ranks #163 out of 200 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, JSW Steel has a GF Score™ of 88/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does JSW Steel's PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, JSW Steel ranks #163 out of 200 companies for PEG Ratio. This places JSW Steel in the lower half of its industry. The industry median PEG Ratio is 1.40. JSW Steel's value of 5.04 is 260% above this benchmark. Historically, JSW Steel's own PEG Ratio has ranged from 0.27 to 12.50 over the past decade. While the company's 10-year median is 1.20 vs. the industry median of 1.40, JSW Steel has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.40, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. JSW Steel's current PEG Ratio of 5.04 is 260% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on JSW Steel and its competitors. For the Steel industry, the median PEG Ratio is 1.40 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. JSW Steel's current PEG Ratio is 5.04, which is 320% above median its own 10-year median of 1.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is JSW Steel stock overvalued right now?
Based on GuruFocus' analysis, JSW Steel (NSE:JSWSTEEL) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹1,039.60, compared to a current price of ₹1,219.50 — trading 17.3% above its estimated fair value. The current PEG Ratio is 5.04, which is 320% above median its 10-year median of 1.20 and 260% above the Steel industry median of 1.40. JSW Steel's overall GF Score™ is 88/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For JSW Steel (NSE:JSWSTEEL), the current PEG Ratio is 5.04 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is JSW Steel (NSE:JSWSTEEL) Overvalued in 2026?
Based on GuruFocus' analysis, JSW Steel stock appears to be overvalued.
The current stock price of ₹1,219.50 is trading 17.3% above its estimated GF Value™ of ₹1,039.60.
GuruFocus considers JSW Steel to be Modestly Overvalued.
Key valuation signals for NSE:JSWSTEEL:
PEG Ratio: 5.04 (320% above median its 10-year median of 1.20)
GF Value™: ₹1,039.60 vs. price of ₹1,219.50 (17.3% above fair value)
Industry Position: 260% above the Steel median (#163 of 200)
No single metric tells the full story. See the NSE:JSWSTEEL stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
JSW Steel Ltd is an India-based company that is engaged in the business of manufacturing and selling steel products. Its steel products include semis, hot-rolled steel, cold-rolled steel, galvanized steel, color-coated steel, and long products. Its flat steel products (including hot-rolled, cold-rolled, and galvanized products), which account for the majority of the company's steel volume, are used in Indian automotive, construction, infrastructure, engineering, and consumer durable industries. Its long products are used in the Indian construction, infrastructure, and automotive industries. The company generates the majority of its revenue from the Indian domestic market.
88GF Score
Get the complete analysis for NSE:JSWSTEEL
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:JSWSTEEL has been successfully added to your 
