JTL IndustriesNSE:JTLIND -2.77%95 PEG Ratio is 1.97 as of Jul. 11, 2026, which is 228% above its 10-year median of 0.60. GuruFocus rates NSE:JTLIND with a GF Score™ of 95/100 and a GF Value™ of ₹115.39 (Possible Value Trap). The stock has 9 warning signs investors should review. Among 200 Steel companies, JTL Industries ranks worse than 60.5% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for JTL Industries's PEG Ratio or its related term are showing as below:
NSE:JTLIND'
s PEG Ratio Range Over the Past 10 Years
Min: 0.09 Med: 0.6 Max: 17.27
Current: 1.97
During the past 13 years, JTL Industries's highest PEG Ratio was 17.27. The lowest was 0.09. And the median was 0.60.
NSE:JTLIND's PEG Ratio is ranked worse than 60.5% of 200
companies
in the Steel industry
Industry Median: 1.395
vs NSE:JTLIND: 1.97
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
JTL Industries (NSE:JTLIND) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
JTL Industries PEG Ratio Related Terms
JTL Industries PEG Ratio Historical Data
* Premium members only.
The historical data trend for JTL Industries's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Steel subindustry, JTL Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
JTL Industries PEG Ratio vs Steel Industry
For the Steel industry and Basic Materials sector, JTL Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where JTL Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
JTL Industries (NSE:JTLIND) has a PEG Ratio of 1.97 as of Jul. 11, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on JTL Industries and its competitors. This is 228% above median its historical median of 0.60. Over the past decade, JTL Industries' PEG Ratio has ranged from 0.09 to 17.27. According to the industry distribution chart, JTL Industries ranks #121 out of 200 companies in the Steel industry, placing it in the top 60.5%.
Is JTL Industries' PEG Ratio too high?
JTL Industries' current PEG Ratio of 1.97 is 228% above median its 10-year median of 0.60. Over the past 10 years, this metric has ranged from a low of 0.09 to a high of 17.27. The Steel industry median PEG Ratio is 1.40. JTL Industries' value of 1.97 is 41.2% above this industry median. Based on the distribution chart, JTL Industries ranks #121 out of 200 companies in the Steel industry, which is below the industry midpoint. Overall, JTL Industries has a GF Score™ of 95/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does JTL Industries' PEG Ratio compare to NUE and STLD?
According to the Steel industry distribution chart, JTL Industries ranks #121 out of 200 companies for PEG Ratio. This places JTL Industries in the lower half of its industry. The industry median PEG Ratio is 1.40. JTL Industries' value of 1.97 is 41.2% above this benchmark. Historically, JTL Industries' own PEG Ratio has ranged from 0.09 to 17.27 over the past decade. While the company's 10-year median is 0.60 vs. the industry median of 1.40, JTL Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Steel company?
The median PEG Ratio among Steel companies is 1.40, based on 200 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. JTL Industries's current PEG Ratio of 1.97 is 41.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on JTL Industries and its competitors. For the Steel industry, the median PEG Ratio is 1.40 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. JTL Industries's current PEG Ratio is 1.97, which is 228% above median its own 10-year median of 0.60. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is JTL Industries stock overvalued right now?
Based on GuruFocus' analysis, JTL Industries (NSE:JTLIND) is currently considered Possible Value Trap. The stock's GF Value™ is ₹115.39, compared to a current price of ₹78.04 — trading 32.4% below its estimated fair value. The current PEG Ratio is 1.97, which is 228% above median its 10-year median of 0.60 and 41.2% above the Steel industry median of 1.40. JTL Industries' overall GF Score™ is 95/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For JTL Industries (NSE:JTLIND), the current PEG Ratio is 1.97 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is JTL Industries (NSE:JTLIND) Overvalued in 2026?
Based on GuruFocus' analysis, JTL Industries stock appears to be undervalued.
The current stock price of ₹78.04 is trading 32.4% below its estimated GF Value™ of ₹115.39.
GuruFocus considers JTL Industries to be Possible Value Trap.
Key valuation signals for NSE:JTLIND:
PEG Ratio: 1.97 (228% above median its 10-year median of 0.60)
GF Value™: ₹115.39 vs. price of ₹78.04 (32.4% below fair value)
Industry Position: 41.2% above the Steel median (#121 of 200)
No single metric tells the full story. See the NSE:JTLIND stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
JTL Industries Ltd operates in the metal industry. The company manufactures and is involved in galvanized ERW Steel Pipes and Tubes, hollow sections, and structural steel extensively used in engineering and construction projects. The Company's business operations predominantly relate to the manufacture of a single product, i.e., ERW pipes for selling world wide. The company has a pan-India presence and is globally present in serving continents. It derives maximum revenue from India.
95GF Score
Get the complete analysis for NSE:JTLIND
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:JTLIND has been successfully added to your 
