Uniparts IndiaNSE:UNIPARTS -1.42%68 PEG Ratio is 12.01 as of Jul. 09, 2026, which is 34% above its 10-year median of 8.97. GuruFocus rates NSE:UNIPARTS with a GF Score™ of 68/100 and a GF Value™ of ₹534.27 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 104 Farm & Heavy Construction Machinery companies, Uniparts India ranks worse than 93.27% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Uniparts India's PEG Ratio or its related term are showing as below:
NSE:UNIPARTS'
s PEG Ratio Range Over the Past 10 Years
Min: 2.33 Med: 8.97 Max: 12.87
Current: 12
During the past 7 years, Uniparts India's highest PEG Ratio was 12.87. The lowest was 2.33. And the median was 8.97.
NSE:UNIPARTS's PEG Ratio is ranked worse than 93.27% of 104
companies
in the Farm & Heavy Construction Machinery industry
Industry Median: 1.055
vs NSE:UNIPARTS: 12.00
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Uniparts India (NSE:UNIPARTS) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Uniparts India PEG Ratio Related Terms
Uniparts India PEG Ratio Historical Data
* Premium members only.
The historical data trend for Uniparts India's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
NSE:UNIPARTS vs CAT, DE, PCAR: PEG Ratio Comparison
For the Farm & Heavy Construction Machinery subindustry, Uniparts India's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Uniparts India PEG Ratio vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, Uniparts India's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Uniparts India's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Uniparts India (NSE:UNIPARTS) has a PEG Ratio of 12.01 as of Jul. 09, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Uniparts India and its competitors. This is 34% above median its historical median of 8.97. Over the past decade, Uniparts India's PEG Ratio has ranged from 2.33 to 12.87. According to the industry distribution chart, Uniparts India ranks #97 out of 104 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 93.3%.
Is Uniparts India's PEG Ratio too high?
Uniparts India's current PEG Ratio of 12.01 is 34% above median its 10-year median of 8.97. Over the past 10 years, this metric has ranged from a low of 2.33 to a high of 12.87. The Farm & Heavy Construction Machinery industry median PEG Ratio is 1.06. Uniparts India's value of 12.01 is 1038.4% above this industry median. Based on the distribution chart, Uniparts India ranks #97 out of 104 companies in the Farm & Heavy Construction Machinery industry, which is in the bottom quartile relative to peers. Overall, Uniparts India has a GF Score™ of 68/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Uniparts India's PEG Ratio compare to CAT and DE?
According to the Farm & Heavy Construction Machinery industry distribution chart, Uniparts India ranks #97 out of 104 companies for PEG Ratio. This places Uniparts India in the lower half of its industry. The industry median PEG Ratio is 1.06. Uniparts India's value of 12.01 is 1038.4% above this benchmark. Historically, Uniparts India's own PEG Ratio has ranged from 2.33 to 12.87 over the past decade. While the company's 10-year median is 8.97 vs. the industry median of 1.06, Uniparts India has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Farm & Heavy Construction Machinery company?
The median PEG Ratio among Farm & Heavy Construction Machinery companies is 1.06, based on 104 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Uniparts India's current PEG Ratio of 12.01 is 1038.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Uniparts India and its competitors. For the Farm & Heavy Construction Machinery industry, the median PEG Ratio is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Uniparts India's current PEG Ratio is 12.01, which is 34% above median its own 10-year median of 8.97. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Uniparts India stock overvalued right now?
Based on GuruFocus' analysis, Uniparts India (NSE:UNIPARTS) is currently considered Modestly Overvalued. The stock's GF Value™ is ₹534.27, compared to a current price of ₹641.80 — trading 20.1% above its estimated fair value. The current PEG Ratio is 12.01, which is 34% above median its 10-year median of 8.97 and 1038.4% above the Farm & Heavy Construction Machinery industry median of 1.06. Uniparts India's overall GF Score™ is 68/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Uniparts India (NSE:UNIPARTS), the current PEG Ratio is 12.01 as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Uniparts India (NSE:UNIPARTS) Overvalued in 2026?
Based on GuruFocus' analysis, Uniparts India stock appears to be overvalued.
The current stock price of ₹641.80 is trading 20.1% above its estimated GF Value™ of ₹534.27.
GuruFocus considers Uniparts India to be Modestly Overvalued.
Key valuation signals for NSE:UNIPARTS:
PEG Ratio: 12.01 (34% above median its 10-year median of 8.97)
GF Value™: ₹534.27 vs. price of ₹641.80 (20.1% above fair value)
Industry Position: 1038.4% above the Farm & Heavy Construction Machinery median (#97 of 104)
No single metric tells the full story. See the NSE:UNIPARTS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Uniparts India Ltd is a manufacturer of engineered systems and solutions. The company is a supplier of systems and components for the off-highway market in the agriculture and construction, forestry and mining, and aftermarket sectors. The company's product portfolio includes core product verticals of three point linkage systems and precision machined parts as well as adjacent product verticals of power take-off fabrications and hydraulic cylinders or components. Uniparts is a concept-to-supply player for precision products for off-highway vehicles with a presence across the value chain. Geographically the company derives its revenue from USA, Asia Pacific, Europe, India, Japan, Rest of the world, where the majority is being generated from the USA.
68GF Score
Get the complete analysis for NSE:UNIPARTS
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
NSE:UNIPARTS has been successfully added to your 
