Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
ROCO:1785'
s PEG Ratio Range Over the Past 10 Years
Min: 0.88 Med: 7.16 Max: 256.08
Current: 2.72
During the past 13 years, Solar Applied Materials Technology's highest PEG Ratio was 256.08. The lowest was 0.88. And the median was 7.16.
ROCO:1785's PEG Ratio is ranked worse than 64.94% of 1275
companies
in the Industrial Products industry
Industry Median: 1.82
vs ROCO:1785: 2.72
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Solar Applied Materials Technology (ROCO:1785) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Solar Applied Materials Technology PEG Ratio Related Terms
Solar Applied Materials Technology PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Solar Applied Materials Technology PEG Ratio Chart
For the Metal Fabrication subindustry, Solar Applied Materials Technology's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Solar Applied Materials Technology PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Solar Applied Materials Technology's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Solar Applied Materials Technology's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Solar Applied Materials Technology (ROCO:1785) has a PEG Ratio of 2.72 as of Jul. 16, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Solar Applied Materials Technology and its competitors. This is 62% below median its historical median of 7.16. Over the past decade, Solar Applied Materials Technology's PEG Ratio has ranged from 0.88 to 256.08. According to the industry distribution chart, Solar Applied Materials Technology ranks #828 out of 1275 companies in the Industrial Products industry, placing it in the top 64.9%.
Is Solar Applied Materials Technology's PEG Ratio too high?
Solar Applied Materials Technology's current PEG Ratio of 2.72 is 62% below median its 10-year median of 7.16. Over the past 10 years, this metric has ranged from a low of 0.88 to a high of 256.08. The Industrial Products industry median PEG Ratio is 1.82. Solar Applied Materials Technology's value of 2.72 is 49.5% above this industry median. Based on the distribution chart, Solar Applied Materials Technology ranks #828 out of 1275 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Solar Applied Materials Technology has a GF Score™ of 60/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Solar Applied Materials Technology's PEG Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Solar Applied Materials Technology ranks #828 out of 1275 companies for PEG Ratio. This places Solar Applied Materials Technology in the lower half of its industry. The industry median PEG Ratio is 1.82. Solar Applied Materials Technology's value of 2.72 is 49.5% above this benchmark. Historically, Solar Applied Materials Technology's own PEG Ratio has ranged from 0.88 to 256.08 over the past decade. While the company's 10-year median is 7.16 vs. the industry median of 1.82, Solar Applied Materials Technology has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.82, based on 1,275 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Solar Applied Materials Technology's current PEG Ratio of 2.72 is 49.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Solar Applied Materials Technology and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Solar Applied Materials Technology's current PEG Ratio is 2.72, which is 62% below median its own 10-year median of 7.16. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Solar Applied Materials Technology stock overvalued right now?
Based on GuruFocus' analysis, Solar Applied Materials Technology (ROCO:1785) is currently considered Modestly Overvalued. The stock's GF Value™ is NT$96.05, compared to a current price of NT$121.00 — trading 26% above its estimated fair value. The current PEG Ratio is 2.72, which is 62% below median its 10-year median of 7.16 and 49.5% above the Industrial Products industry median of 1.82. Solar Applied Materials Technology's overall GF Score™ is 60/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Solar Applied Materials Technology (ROCO:1785), the current PEG Ratio is 2.72 as of Jul. 16, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Solar Applied Materials Technology (ROCO:1785) Overvalued in 2026?
Based on GuruFocus' analysis, Solar Applied Materials Technology stock appears to be overvalued.
The current stock price of NT$121.00 is trading 26% above its estimated GF Value™ of NT$96.05.
GuruFocus considers Solar Applied Materials Technology to be Modestly Overvalued.
Key valuation signals for ROCO:1785:
PEG Ratio: 2.72 (62% below median its 10-year median of 7.16)
GF Value™: NT$96.05 vs. price of NT$121.00 (26% above fair value)
Industry Position: 49.5% above the Industrial Products median (#828 of 1275)
No single metric tells the full story. See the ROCO:1785 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Solar Applied Materials Technology Business Description
Solar Applied Materials Technology Corp is a company involved in research and development and manufacturing of thin-film sputtering targets. It is engaged in manufacturing, processing, recycling, refining, and trading of sputtering targets for thin film, precious metal materials, and specialty chemicals for automobiles. The firm's operating segment includes Solar and Solar (KunShan). The firm generates the majority of its revenue from Solar (KunShan), which is principally engaged in producing photovoltaic sputtering targets for thin film, electroplating chemicals, specialty chemicals for automobiles, and electroplating processing.
60GF Score
Get the complete analysis for ROCO:1785
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:1785 has been successfully added to your 
