Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
What is Nam Lee Pressed Metal Industries PEG Ratio?
Nam Lee Pressed Metal IndustriesSGX:G0I -0.85%63 PEG Ratio is 0.49 as of Sep. 08, 2026, which is 74% below its 10-year median of 1.88. GuruFocus rates SGX:G0I with a GF Score™ of 63/100 and a GF Value™ of S$0.41 (Significantly Overvalued). The stock has 1 warning sign investors should review. Among 1,273 Industrial Products companies, Nam Lee Pressed Metal Industries ranks better than 86.65% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Nam Lee Pressed Metal Industries's PEG Ratio or its related term are showing as below:
SGX:G0I'
s PEG Ratio Range Over the Past 10 Years
Min: 0.44 Med: 1.88 Max: 18.11
Current: 0.49
During the past 13 years, Nam Lee Pressed Metal Industries's highest PEG Ratio was 18.11. The lowest was 0.44. And the median was 1.88.
SGX:G0I's PEG Ratio is ranked better than 86.65% of 1273
companies
in the Industrial Products industry
Industry Median: 1.75
vs SGX:G0I: 0.49
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Nam Lee Pressed Metal Industries (SGX:G0I) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Nam Lee Pressed Metal Industries PEG Ratio Related Terms
Nam Lee Pressed Metal Industries PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, Nam Lee Pressed Metal Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Nam Lee Pressed Metal Industries PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Nam Lee Pressed Metal Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Nam Lee Pressed Metal Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Nam Lee Pressed Metal Industries (SGX:G0I) has a PEG Ratio of 0.49 as of Sep. 08, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nam Lee Pressed Metal Industries and its competitors. This is 74% below median its historical median of 1.88. Over the past decade, Nam Lee Pressed Metal Industries' PEG Ratio has ranged from 0.44 to 18.11. According to the industry distribution chart, Nam Lee Pressed Metal Industries ranks #170 out of 1273 companies in the Industrial Products industry, placing it in the top 13.4%.
Is Nam Lee Pressed Metal Industries' PEG Ratio too high?
Nam Lee Pressed Metal Industries' current PEG Ratio of 0.49 is 74% below median its 10-year median of 1.88. Over the past 10 years, this metric has ranged from a low of 0.44 to a high of 18.11. The Industrial Products industry median PEG Ratio is 1.75. Nam Lee Pressed Metal Industries' value of 0.49 is 72% below this industry median. Based on the distribution chart, Nam Lee Pressed Metal Industries ranks #170 out of 1273 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Nam Lee Pressed Metal Industries has a GF Score™ of 63/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Nam Lee Pressed Metal Industries' PEG Ratio compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Nam Lee Pressed Metal Industries ranks #170 out of 1273 companies for PEG Ratio. This places Nam Lee Pressed Metal Industries in the top 13% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.75. Nam Lee Pressed Metal Industries' value of 0.49 is 72% below this benchmark. Historically, Nam Lee Pressed Metal Industries' own PEG Ratio has ranged from 0.44 to 18.11 over the past decade. While the company's 10-year median is 1.88 vs. the industry median of 1.75, Nam Lee Pressed Metal Industries has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.75, based on 1,273 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Nam Lee Pressed Metal Industries's current PEG Ratio of 0.49 is 72% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nam Lee Pressed Metal Industries and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Nam Lee Pressed Metal Industries's current PEG Ratio is 0.49, which is 74% below median its own 10-year median of 1.88. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Nam Lee Pressed Metal Industries stock overvalued right now?
Based on GuruFocus' analysis, Nam Lee Pressed Metal Industries (SGX:G0I) is currently considered Significantly Overvalued. The stock's GF Value™ is S$0.41, compared to a current price of S$0.58 — trading 41.5% above its estimated fair value. The current PEG Ratio is 0.49, which is 74% below median its 10-year median of 1.88 and 72% below the Industrial Products industry median of 1.75. Nam Lee Pressed Metal Industries' overall GF Score™ is 63/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Nam Lee Pressed Metal Industries (SGX:G0I), the current PEG Ratio is 0.49 as of Sep. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Nam Lee Pressed Metal Industries (SGX:G0I) Overvalued in 2026?
Based on GuruFocus' analysis, Nam Lee Pressed Metal Industries stock appears to be overvalued.
The current stock price of S$0.58 is trading 41.5% above its estimated GF Value™ of S$0.41.
GuruFocus considers Nam Lee Pressed Metal Industries to be Significantly Overvalued.
Key valuation signals for SGX:G0I:
PEG Ratio: 0.49 (74% below median its 10-year median of 1.88)
GF Value™: S$0.41 vs. price of S$0.58 (41.5% above fair value)
Industry Position: 72% below the Industrial Products median (#170 of 1273)
No single metric tells the full story. See the SGX:G0I stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Nam Lee Pressed Metal Industries Ltd is engaged in the designing, manufacturing, and supplying of metal products and solutions for diverse industries. It has four segments; the Aluminium segment which generates maximum revenue, includes products for building construction and other industrial uses, such as curtain walls, cladding windows, and container refrigeration units; the Mild Steel segment includes products for door frames and entrance gates for building construction projects; the Stainless Steel segment includes products such as drying racks and hoppers used for building construction projects; and the UPVC products include doors, skirting, and flooring for building construction projects. Geographically, the company derives its key revenue from Singapore and the rest from Malaysia.
63GF Score
Get the complete analysis for SGX:G0I
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SGX:G0I has been successfully added to your 
