Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Nam Lee Pressed Metal IndustriesSGX:G0I -0.85%63 Dividend Yield % is 5.13% as of Sep. 08, 2026, which is 87% above its 10-year median of 2.74. GuruFocus rates SGX:G0I with a GF Score™ of 63/100 and a GF Value™ of S$0.41 (Significantly Overvalued). The stock has 1 warning sign investors should review. Among 1,873 Industrial Products companies, Nam Lee Pressed Metal Industries ranks better than 93.49% on this metric.
During the past 13 years, the highest Dividend Payout Ratio of Nam Lee Pressed Metal Industries was 0.63. The lowest was 0.06. And the median was 0.26.
During the past 12 months, Nam Lee Pressed Metal Industries's average Dividends Per Share Growth Rate was 100.00% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was -4.40% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was -1.50% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Nam Lee Pressed Metal Industries was 49.40% per year. The lowest was -33.10% per year. And the median was 0.00% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Nam Lee Pressed Metal Industries (SGX:G0I) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Nam Lee Pressed Metal Industries Dividend Yield % Chart
SGX:G0I vs ATI, CRS, MLI: Dividend Yield % Comparison
For the Metal Fabrication subindustry, Nam Lee Pressed Metal Industries's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Nam Lee Pressed Metal Industries Dividend Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Nam Lee Pressed Metal Industries's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Nam Lee Pressed Metal Industries's Dividend Yield % falls into.
Nam Lee Pressed Metal Industries Dividend Yield % Calculation
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Nam Lee Pressed Metal Industries Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
SGD 0.030000
2026-02-25
2026-02-26
2026-03-10
Cash Dividend
annually
SGD:SGD 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Nam Lee Pressed Metal Industries (SGX:G0I) has a Dividend Yield % of 5.13% as of Sep. 08, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Nam Lee Pressed Metal Industries and its competitors. This is 87% above median its historical median of 2.74. Over the past decade, Nam Lee Pressed Metal Industries' Dividend Yield % has ranged from 0.56 to 8.62. According to the industry distribution chart, Nam Lee Pressed Metal Industries ranks #122 out of 1873 companies in the Industrial Products industry, placing it in the top 6.5%.
Is Nam Lee Pressed Metal Industries' Dividend Yield % too high?
Nam Lee Pressed Metal Industries' current Dividend Yield % of 5.13% is 87% above median its 10-year median of 2.74. Over the past 10 years, this metric has ranged from a low of 0.56 to a high of 8.62. The Industrial Products industry median Dividend Yield % is 1.49. Nam Lee Pressed Metal Industries' value of 5.13% is 244.3% above this industry median. Based on the distribution chart, Nam Lee Pressed Metal Industries ranks #122 out of 1873 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Nam Lee Pressed Metal Industries has a GF Score™ of 63/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Nam Lee Pressed Metal Industries' Dividend Yield % compare to ATI and CRS?
According to the Industrial Products industry distribution chart, Nam Lee Pressed Metal Industries ranks #122 out of 1873 companies for Dividend Yield %. This places Nam Lee Pressed Metal Industries in the top 7% of its industry — outperforming the majority of peers. The industry median Dividend Yield % is 1.49. Nam Lee Pressed Metal Industries' value of 5.13% is 244.3% above this benchmark. Historically, Nam Lee Pressed Metal Industries' own Dividend Yield % has ranged from 0.56 to 8.62 over the past decade. While the company's 10-year median is 2.74 vs. the industry median of 1.49, Nam Lee Pressed Metal Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for an Industrial Products company?
The median Dividend Yield % among Industrial Products companies is 1.49, based on 1,873 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Nam Lee Pressed Metal Industries's current Dividend Yield % of 5.13% is 244.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Nam Lee Pressed Metal Industries and its competitors. For the Industrial Products industry, the median Dividend Yield % is 1.49 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Nam Lee Pressed Metal Industries's current Dividend Yield % is 5.13%, which is 87% above median its own 10-year median of 2.74. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Nam Lee Pressed Metal Industries stock overvalued right now?
Based on GuruFocus' analysis, Nam Lee Pressed Metal Industries (SGX:G0I) is currently considered Significantly Overvalued. The stock's GF Value™ is S$0.41, compared to a current price of S$0.58 — trading 41.5% above its estimated fair value. The current Dividend Yield % is 5.13%, which is 87% above median its 10-year median of 2.74 and 244.3% above the Industrial Products industry median of 1.49. Nam Lee Pressed Metal Industries' overall GF Score™ is 63/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Nam Lee Pressed Metal Industries (SGX:G0I), the current Dividend Yield % is 5.13% as of Sep. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Nam Lee Pressed Metal Industries (SGX:G0I) Overvalued in 2026?
Based on GuruFocus' analysis, Nam Lee Pressed Metal Industries stock appears to be overvalued.
The current stock price of S$0.58 is trading 41.5% above its estimated GF Value™ of S$0.41.
GuruFocus considers Nam Lee Pressed Metal Industries to be Significantly Overvalued.
Key valuation signals for SGX:G0I:
Dividend Yield %: 5.13% (87% above median its 10-year median of 2.74)
GF Value™: S$0.41 vs. price of S$0.58 (41.5% above fair value)
Industry Position: 244.3% above the Industrial Products median (#122 of 1873)
No single metric tells the full story. See the SGX:G0I stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Nam Lee Pressed Metal Industries Ltd is engaged in the designing, manufacturing, and supplying of metal products and solutions for diverse industries. It has four segments; the Aluminium segment which generates maximum revenue, includes products for building construction and other industrial uses, such as curtain walls, cladding windows, and container refrigeration units; the Mild Steel segment includes products for door frames and entrance gates for building construction projects; the Stainless Steel segment includes products such as drying racks and hoppers used for building construction projects; and the UPVC products include doors, skirting, and flooring for building construction projects. Geographically, the company derives its key revenue from Singapore and the rest from Malaysia.
63GF Score
Get the complete analysis for SGX:G0I
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SGX:G0I has been successfully added to your 
