Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:600320's PEG Ratio is ranked worse than 81.73% of 1275
companies
in the Industrial Products industry
Industry Median: 1.81
vs SHSE:600320: 6.13
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Shanghai Zhenhua Heavy Industries Co (SHSE:600320) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Shanghai Zhenhua Heavy Industries Co PEG Ratio Related Terms
Shanghai Zhenhua Heavy Industries Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Shanghai Zhenhua Heavy Industries Co PEG Ratio Chart
For the Specialty Industrial Machinery subindustry, Shanghai Zhenhua Heavy Industries Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shanghai Zhenhua Heavy Industries Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Shanghai Zhenhua Heavy Industries Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Shanghai Zhenhua Heavy Industries Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Shanghai Zhenhua Heavy Industries Co (SHSE:600320) has a PEG Ratio of 6.13 as of Jul. 15, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shanghai Zhenhua Heavy Industries Co and its competitors. This is near median its historical median of 6.20. Over the past decade, Shanghai Zhenhua Heavy Industries Co's PEG Ratio has ranged from 1.78 to 258.06. According to the industry distribution chart, Shanghai Zhenhua Heavy Industries Co ranks #1042 out of 1275 companies in the Industrial Products industry, placing it in the top 81.7%.
Is Shanghai Zhenhua Heavy Industries Co's PEG Ratio too high?
Shanghai Zhenhua Heavy Industries Co's current PEG Ratio of 6.13 is near median its 10-year median of 6.20. Over the past 10 years, this metric has ranged from a low of 1.78 to a high of 258.06. The Industrial Products industry median PEG Ratio is 1.81. Shanghai Zhenhua Heavy Industries Co's value of 6.13 is 238.7% above this industry median. Based on the distribution chart, Shanghai Zhenhua Heavy Industries Co ranks #1042 out of 1275 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Shanghai Zhenhua Heavy Industries Co has a GF Score™ of 78/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Shanghai Zhenhua Heavy Industries Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Shanghai Zhenhua Heavy Industries Co ranks #1042 out of 1275 companies for PEG Ratio. This places Shanghai Zhenhua Heavy Industries Co in the lower half of its industry. The industry median PEG Ratio is 1.81. Shanghai Zhenhua Heavy Industries Co's value of 6.13 is 238.7% above this benchmark. Historically, Shanghai Zhenhua Heavy Industries Co's own PEG Ratio has ranged from 1.78 to 258.06 over the past decade. While the company's 10-year median is 6.20 vs. the industry median of 1.81, Shanghai Zhenhua Heavy Industries Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.81, based on 1,275 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shanghai Zhenhua Heavy Industries Co's current PEG Ratio of 6.13 is 238.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shanghai Zhenhua Heavy Industries Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shanghai Zhenhua Heavy Industries Co's current PEG Ratio is 6.13, which is near median its own 10-year median of 6.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shanghai Zhenhua Heavy Industries Co stock overvalued right now?
Based on GuruFocus' analysis, Shanghai Zhenhua Heavy Industries Co (SHSE:600320) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥4.61, compared to a current price of ¥4.14 — trading 10.2% below its estimated fair value. The current PEG Ratio is 6.13, which is near median its 10-year median of 6.20 and 238.7% above the Industrial Products industry median of 1.81. Shanghai Zhenhua Heavy Industries Co's overall GF Score™ is 78/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Shanghai Zhenhua Heavy Industries Co (SHSE:600320), the current PEG Ratio is 6.13 as of Jul. 15, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shanghai Zhenhua Heavy Industries Co (SHSE:600320) Overvalued in 2026?
Based on GuruFocus' analysis, Shanghai Zhenhua Heavy Industries Co stock appears to be undervalued.
The current stock price of ¥4.14 is trading 10.2% below its estimated GF Value™ of ¥4.61.
GuruFocus considers Shanghai Zhenhua Heavy Industries Co to be Modestly Undervalued.
Key valuation signals for SHSE:600320:
PEG Ratio: 6.13 (near median its 10-year median of 6.20)
GF Value™: ¥4.61 vs. price of ¥4.14 (10.2% below fair value)
Industry Position: 238.7% above the Industrial Products median (#1042 of 1275)
No single metric tells the full story. See the SHSE:600320 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shanghai Zhenhua Heavy Industries Co Business Description
Shanghai Zhenhua Heavy Industries Co Ltd manufactures heavy equipment and offers product design and aftermarket services. It constructs large port loading systems and equipment, offshore heavy equipment, engineering machinery, ships, and other large structures. In addition, the company offers environment-friendly devices, including wind power, sea water desalination, sewage treatment, and recycling equipment. Research centers and technologies help meet customers' needs, and provide innovative solutions to enhance operational performance. Offices with regional parts are scattered across the globe to supply timely responses and support preventive maintenance. The majority of total revenue comes from Asia, but the company has diversified operations to several continents.
78GF Score
Get the complete analysis for SHSE:600320
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600320 has been successfully added to your 
