Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for China Petroleum Engineering Co's PEG Ratio or its related term are showing as below:
SHSE:600339'
s PEG Ratio Range Over the Past 10 Years
Min: 14.63 Med: 506.57 Max: 621.71
Current: 15.28
During the past 13 years, China Petroleum Engineering Co's highest PEG Ratio was 621.71. The lowest was 14.63. And the median was 506.57.
SHSE:600339's PEG Ratio is ranked worse than 97.05% of 305
companies
in the Oil & Gas industry
Industry Median: 0.96
vs SHSE:600339: 15.28
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
China Petroleum Engineering Co (SHSE:600339) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
China Petroleum Engineering Co PEG Ratio Related Terms
China Petroleum Engineering Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SHSE:600339 vs SLB, BKR, HAL: PEG Ratio Comparison
For the Oil & Gas Equipment & Services subindustry, China Petroleum Engineering Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
China Petroleum Engineering Co PEG Ratio vs Oil & Gas Industry
For the Oil & Gas industry and Energy sector, China Petroleum Engineering Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where China Petroleum Engineering Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
China Petroleum Engineering Co (SHSE:600339) has a PEG Ratio of 15.28 as of Jul. 14, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on China Petroleum Engineering Co and its competitors. This is 97% below median its historical median of 506.57. Over the past decade, China Petroleum Engineering Co's PEG Ratio has ranged from 14.63 to 621.71. According to the industry distribution chart, China Petroleum Engineering Co ranks #296 out of 305 companies in the Oil & Gas industry, placing it in the top 97%.
Is China Petroleum Engineering Co's PEG Ratio too high?
China Petroleum Engineering Co's current PEG Ratio of 15.28 is 97% below median its 10-year median of 506.57. Over the past 10 years, this metric has ranged from a low of 14.63 to a high of 621.71. The Oil & Gas industry median PEG Ratio is 0.96. China Petroleum Engineering Co's value of 15.28 is 1491.7% above this industry median. Based on the distribution chart, China Petroleum Engineering Co ranks #296 out of 305 companies in the Oil & Gas industry, which is in the bottom quartile relative to peers. Overall, China Petroleum Engineering Co has a GF Score™ of 80/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does China Petroleum Engineering Co's PEG Ratio compare to SLB and BKR?
According to the Oil & Gas industry distribution chart, China Petroleum Engineering Co ranks #296 out of 305 companies for PEG Ratio. This places China Petroleum Engineering Co in the lower half of its industry. The industry median PEG Ratio is 0.96. China Petroleum Engineering Co's value of 15.28 is 1491.7% above this benchmark. Historically, China Petroleum Engineering Co's own PEG Ratio has ranged from 14.63 to 621.71 over the past decade. While the company's 10-year median is 506.57 vs. the industry median of 0.96, China Petroleum Engineering Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Oil & Gas company?
The median PEG Ratio among Oil & Gas companies is 0.96, based on 305 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. China Petroleum Engineering Co's current PEG Ratio of 15.28 is 1491.7% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on China Petroleum Engineering Co and its competitors. For the Oil & Gas industry, the median PEG Ratio is 0.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. China Petroleum Engineering Co's current PEG Ratio is 15.28, which is 97% below median its own 10-year median of 506.57. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is China Petroleum Engineering Co stock overvalued right now?
Based on GuruFocus' analysis, China Petroleum Engineering Co (SHSE:600339) is currently considered Modestly Undervalued. The stock's GF Value™ is ¥4.00, compared to a current price of ¥3.30 — trading 17.5% below its estimated fair value. The current PEG Ratio is 15.28, which is 97% below median its 10-year median of 506.57 and 1491.7% above the Oil & Gas industry median of 0.96. China Petroleum Engineering Co's overall GF Score™ is 80/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For China Petroleum Engineering Co (SHSE:600339), the current PEG Ratio is 15.28 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is China Petroleum Engineering Co (SHSE:600339) Overvalued in 2026?
Based on GuruFocus' analysis, China Petroleum Engineering Co stock appears to be undervalued.
The current stock price of ¥3.30 is trading 17.5% below its estimated GF Value™ of ¥4.00.
GuruFocus considers China Petroleum Engineering Co to be Modestly Undervalued.
Key valuation signals for SHSE:600339:
PEG Ratio: 15.28 (97% below median its 10-year median of 506.57)
GF Value™: ¥4.00 vs. price of ¥3.30 (17.5% below fair value)
Industry Position: 1491.7% above the Oil & Gas median (#296 of 305)
No single metric tells the full story. See the SHSE:600339 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
China Petroleum Engineering Co Business Description
China Petroleum Engineering Co Ltd provides surface facilities to petroleum upstream industry. The company's services include planning through front end engineering design to engineering, procurement, construction and project management consultancy for surface facilities, pipelines, buildings, water treatment facilities, highways, and infrastructure. The firm operates projects in China as well as in the overseas markets such as the Middle East, Central Asia, North Africa, America, Australia, and Europe.
80GF Score
Get the complete analysis for SHSE:600339
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:600339 has been successfully added to your 
