Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Sanxiang Advanced Materials Co's PEG Ratio or its related term are showing as below:
SHSE:603663'
s PEG Ratio Range Over the Past 10 Years
Min: 0.7 Med: 1.75 Max: 131.97
Current: 131.97
During the past 13 years, Sanxiang Advanced Materials Co's highest PEG Ratio was 131.97. The lowest was 0.70. And the median was 1.75.
SHSE:603663's PEG Ratio is ranked worse than 97.88% of 613
companies
in the Chemicals industry
Industry Median: 2.1
vs SHSE:603663: 131.97
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Sanxiang Advanced Materials Co (SHSE:603663) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Sanxiang Advanced Materials Co PEG Ratio Related Terms
Sanxiang Advanced Materials Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SHSE:603663 vs LIN, SHW, ECL: PEG Ratio Comparison
For the Specialty Chemicals subindustry, Sanxiang Advanced Materials Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sanxiang Advanced Materials Co PEG Ratio vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Sanxiang Advanced Materials Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Sanxiang Advanced Materials Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Sanxiang Advanced Materials Co (SHSE:603663) has a PEG Ratio of 131.97 as of Jul. 27, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sanxiang Advanced Materials Co and its competitors. This is 7441% above median its historical median of 1.75. Over the past decade, Sanxiang Advanced Materials Co's PEG Ratio has ranged from 0.70 to 131.97. According to the industry distribution chart, Sanxiang Advanced Materials Co ranks #600 out of 613 companies in the Chemicals industry, placing it in the top 97.9%.
Is Sanxiang Advanced Materials Co's PEG Ratio too high?
Sanxiang Advanced Materials Co's current PEG Ratio of 131.97 is 7441% above median its 10-year median of 1.75. Over the past 10 years, this metric has ranged from a low of 0.70 to a high of 131.97. The Chemicals industry median PEG Ratio is 2.10. Sanxiang Advanced Materials Co's value of 131.97 is 6184.3% above this industry median. Based on the distribution chart, Sanxiang Advanced Materials Co ranks #600 out of 613 companies in the Chemicals industry, which is in the bottom quartile relative to peers. Overall, Sanxiang Advanced Materials Co has a GF Score™ of 60/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Sanxiang Advanced Materials Co's PEG Ratio compare to LIN and SHW?
According to the Chemicals industry distribution chart, Sanxiang Advanced Materials Co ranks #600 out of 613 companies for PEG Ratio. This places Sanxiang Advanced Materials Co in the lower half of its industry. The industry median PEG Ratio is 2.10. Sanxiang Advanced Materials Co's value of 131.97 is 6184.3% above this benchmark. Historically, Sanxiang Advanced Materials Co's own PEG Ratio has ranged from 0.70 to 131.97 over the past decade. While the company's 10-year median is 1.75 vs. the industry median of 2.10, Sanxiang Advanced Materials Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Chemicals company?
The median PEG Ratio among Chemicals companies is 2.10, based on 613 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sanxiang Advanced Materials Co's current PEG Ratio of 131.97 is 6184.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sanxiang Advanced Materials Co and its competitors. For the Chemicals industry, the median PEG Ratio is 2.10 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sanxiang Advanced Materials Co's current PEG Ratio is 131.97, which is 7441% above median its own 10-year median of 1.75. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sanxiang Advanced Materials Co stock overvalued right now?
Based on GuruFocus' analysis, Sanxiang Advanced Materials Co (SHSE:603663) is currently considered Significantly Overvalued. The stock's GF Value™ is ¥15.40, compared to a current price of ¥40.66 — trading 164% above its estimated fair value. The current PEG Ratio is 131.97, which is 7441% above median its 10-year median of 1.75 and 6184.3% above the Chemicals industry median of 2.10. Sanxiang Advanced Materials Co's overall GF Score™ is 60/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Sanxiang Advanced Materials Co (SHSE:603663), the current PEG Ratio is 131.97 as of Jul. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sanxiang Advanced Materials Co (SHSE:603663) Overvalued in 2026?
Based on GuruFocus' analysis, Sanxiang Advanced Materials Co stock appears to be overvalued.
The current stock price of ¥40.66 is trading 164% above its estimated GF Value™ of ¥15.40.
GuruFocus considers Sanxiang Advanced Materials Co to be Significantly Overvalued.
Key valuation signals for SHSE:603663:
PEG Ratio: 131.97 (7441% above median its 10-year median of 1.75)
GF Value™: ¥15.40 vs. price of ¥40.66 (164% above fair value)
Industry Position: 6184.3% above the Chemicals median (#600 of 613)
No single metric tells the full story. See the SHSE:603663 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sanxiang Advanced Materials Co Business Description
Sanxiang Advanced Materials Co Ltd produces, manufactures, and sells new materials such as varieties of zirconia, magnesium, and advanced ceramics. Its products are widely used in aerospace, military, fire-resistant and wear-resistant materials, ceramic glazes, and other industries. The company's business segments include the zirconium series, magnesium series, and advanced ceramic series through which it offers products like nano zirconium oxide, zirconium oxychloride, lightweight new materials, casting new materials, magnesium aluminum alloys, and others.
60GF Score
Get the complete analysis for SHSE:603663
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:603663 has been successfully added to your 
