Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
SHSE:688059'
s PEG Ratio Range Over the Past 10 Years
Min: 0.96 Med: 5.9 Max: 19.91
Current: 1.84
During the past 9 years, Zhuzhou Huarui Precision Tools Co's highest PEG Ratio was 19.91. The lowest was 0.96. And the median was 5.90.
SHSE:688059's PEG Ratio is ranked worse than 52.62% of 1277
companies
in the Industrial Products industry
Industry Median: 1.76
vs SHSE:688059: 1.84
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Zhuzhou Huarui Precision Tools Co (SHSE:688059) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Zhuzhou Huarui Precision Tools Co PEG Ratio Related Terms
Zhuzhou Huarui Precision Tools Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
SHSE:688059 vs SNA, RBC, LECO: PEG Ratio Comparison
For the Tools & Accessories subindustry, Zhuzhou Huarui Precision Tools Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Zhuzhou Huarui Precision Tools Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Zhuzhou Huarui Precision Tools Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Zhuzhou Huarui Precision Tools Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Zhuzhou Huarui Precision Tools Co (SHSE:688059) has a PEG Ratio of 1.84 as of Jul. 20, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Zhuzhou Huarui Precision Tools Co and its competitors. This is 69% below median its historical median of 5.90. Over the past decade, Zhuzhou Huarui Precision Tools Co's PEG Ratio has ranged from 0.96 to 19.91. According to the industry distribution chart, Zhuzhou Huarui Precision Tools Co ranks #672 out of 1277 companies in the Industrial Products industry, placing it in the top 52.6%.
Is Zhuzhou Huarui Precision Tools Co's PEG Ratio too high?
Zhuzhou Huarui Precision Tools Co's current PEG Ratio of 1.84 is 69% below median its 10-year median of 5.90. Over the past 10 years, this metric has ranged from a low of 0.96 to a high of 19.91. The Industrial Products industry median PEG Ratio is 1.76. Zhuzhou Huarui Precision Tools Co's value of 1.84 is 4.5% above this industry median. Based on the distribution chart, Zhuzhou Huarui Precision Tools Co ranks #672 out of 1277 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Zhuzhou Huarui Precision Tools Co has a GF Score™ of 89/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Zhuzhou Huarui Precision Tools Co's PEG Ratio compare to SNA and RBC?
According to the Industrial Products industry distribution chart, Zhuzhou Huarui Precision Tools Co ranks #672 out of 1277 companies for PEG Ratio. This places Zhuzhou Huarui Precision Tools Co in the lower half of its industry. The industry median PEG Ratio is 1.76. Zhuzhou Huarui Precision Tools Co's value of 1.84 is 4.5% above this benchmark. Historically, Zhuzhou Huarui Precision Tools Co's own PEG Ratio has ranged from 0.96 to 19.91 over the past decade. While the company's 10-year median is 5.90 vs. the industry median of 1.76, Zhuzhou Huarui Precision Tools Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.76, based on 1,277 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Zhuzhou Huarui Precision Tools Co's current PEG Ratio of 1.84 is 4.5% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Zhuzhou Huarui Precision Tools Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.76 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Zhuzhou Huarui Precision Tools Co's current PEG Ratio is 1.84, which is 69% below median its own 10-year median of 5.90. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Zhuzhou Huarui Precision Tools Co stock overvalued right now?
Based on GuruFocus' analysis, Zhuzhou Huarui Precision Tools Co (SHSE:688059) is currently considered Fairly Valued. The stock's GF Value™ is ¥65.89, compared to a current price of ¥66.47 — trading 0.9% above its estimated fair value. The current PEG Ratio is 1.84, which is 69% below median its 10-year median of 5.90 and 4.5% above the Industrial Products industry median of 1.76. Zhuzhou Huarui Precision Tools Co's overall GF Score™ is 89/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Zhuzhou Huarui Precision Tools Co (SHSE:688059), the current PEG Ratio is 1.84 as of Jul. 20, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Zhuzhou Huarui Precision Tools Co (SHSE:688059) Overvalued in 2026?
Based on GuruFocus' analysis, Zhuzhou Huarui Precision Tools Co stock appears to be overvalued.
The current stock price of ¥66.47 is trading 0.9% above its estimated GF Value™ of ¥65.89.
GuruFocus considers Zhuzhou Huarui Precision Tools Co to be Fairly Valued.
Key valuation signals for SHSE:688059:
PEG Ratio: 1.84 (69% below median its 10-year median of 5.90)
GF Value™: ¥65.89 vs. price of ¥66.47 (0.9% above fair value)
Industry Position: 4.5% above the Industrial Products median (#672 of 1277)
No single metric tells the full story. See the SHSE:688059 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Zhuzhou Huarui Precision Tools Co Business Description
Zhuzhou Huarui Precision Tools Co Ltd is engaged in research and development, production and sales of cemented carbide tools, solid carbide end mills, welded and clamped cutting tools and cemented carbide material. The company's products are mainly used in aerospace, rail transit, automobile, energy, precision electronics, precision mold and other industries.
89GF Score
Get the complete analysis for SHSE:688059
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:688059 has been successfully added to your 
