* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Neway CNC Equipment (Suzhou) Co's PEG Ratio or its related term are showing as below:
SHSE:688697'
s PEG Ratio Range Over the Past 10 Years
Min: 0.58 Med: 0.85 Max: 1.83
Current: 1.6
During the past 9 years, Neway CNC Equipment (Suzhou) Co's highest PEG Ratio was 1.83. The lowest was 0.58. And the median was 0.85.
SHSE:688697's PEG Ratio is ranked better than 54.7% of 1276
companies
in the Industrial Products industry
Industry Median: 1.82
vs SHSE:688697: 1.60
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Neway CNC Equipment (Suzhou) Co (SHSE:688697) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Neway CNC Equipment (Suzhou) Co PEG Ratio Related Terms
Neway CNC Equipment (Suzhou) Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Specialty Industrial Machinery subindustry, Neway CNC Equipment (Suzhou) Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Neway CNC Equipment (Suzhou) Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Neway CNC Equipment (Suzhou) Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Neway CNC Equipment (Suzhou) Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Neway CNC Equipment (Suzhou) Co (SHSE:688697) has a PEG Ratio of 1.60 as of Jul. 13, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Neway CNC Equipment (Suzhou) Co and its competitors. This is 88% above median its historical median of 0.85. Over the past decade, Neway CNC Equipment (Suzhou) Co's PEG Ratio has ranged from 0.58 to 1.83. According to the industry distribution chart, Neway CNC Equipment (Suzhou) Co ranks #578 out of 1276 companies in the Industrial Products industry, placing it in the top 45.3%.
Is Neway CNC Equipment (Suzhou) Co's PEG Ratio too high?
Neway CNC Equipment (Suzhou) Co's current PEG Ratio of 1.60 is 88% above median its 10-year median of 0.85. Over the past 10 years, this metric has ranged from a low of 0.58 to a high of 1.83. The Industrial Products industry median PEG Ratio is 1.82. Neway CNC Equipment (Suzhou) Co's value of 1.60 is 12.1% below this industry median. Based on the distribution chart, Neway CNC Equipment (Suzhou) Co ranks #578 out of 1276 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Neway CNC Equipment (Suzhou) Co has a GF Score™ of 93/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Neway CNC Equipment (Suzhou) Co's PEG Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Neway CNC Equipment (Suzhou) Co ranks #578 out of 1276 companies for PEG Ratio. This puts Neway CNC Equipment (Suzhou) Co in the upper half of its industry. The industry median PEG Ratio is 1.82. Neway CNC Equipment (Suzhou) Co's value of 1.60 is 12.1% below this benchmark. Historically, Neway CNC Equipment (Suzhou) Co's own PEG Ratio has ranged from 0.58 to 1.83 over the past decade. While the company's 10-year median is 0.85 vs. the industry median of 1.82, Neway CNC Equipment (Suzhou) Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.82, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Neway CNC Equipment (Suzhou) Co's current PEG Ratio of 1.60 is 12.1% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Neway CNC Equipment (Suzhou) Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.82 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Neway CNC Equipment (Suzhou) Co's current PEG Ratio is 1.60, which is 88% above median its own 10-year median of 0.85. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Neway CNC Equipment (Suzhou) Co stock overvalued right now?
Based on GuruFocus' analysis, Neway CNC Equipment (Suzhou) Co (SHSE:688697) is currently considered Fairly Valued. The stock's GF Value™ is ¥13.00, compared to a current price of ¥12.27 — trading 5.6% below its estimated fair value. The current PEG Ratio is 1.60, which is 88% above median its 10-year median of 0.85 and 12.1% below the Industrial Products industry median of 1.82. Neway CNC Equipment (Suzhou) Co's overall GF Score™ is 93/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Neway CNC Equipment (Suzhou) Co (SHSE:688697), the current PEG Ratio is 1.60 as of Jul. 13, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Neway CNC Equipment (Suzhou) Co (SHSE:688697) Overvalued in 2026?
Based on GuruFocus' analysis, Neway CNC Equipment (Suzhou) Co stock appears to be undervalued.
The current stock price of ¥12.27 is trading 5.6% below its estimated GF Value™ of ¥13.00.
GuruFocus considers Neway CNC Equipment (Suzhou) Co to be Fairly Valued.
Key valuation signals for SHSE:688697:
PEG Ratio: 1.60 (88% above median its 10-year median of 0.85)
GF Value™: ¥13.00 vs. price of ¥12.27 (5.6% below fair value)
Industry Position: 12.1% below the Industrial Products median (#578 of 1276)
No single metric tells the full story. See the SHSE:688697 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Neway CNC Equipment (Suzhou) Co Business Description
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
SHSE:688697 has been successfully added to your 
