Universal CementTPE:1104 +1.67%83 PEG Ratio is 1.03 as of Jul. 06, 2026, which is 32% above its 10-year median of 0.78. GuruFocus rates TPE:1104 with a GF Score™ of 83/100 and a GF Value™ of NT$30.39 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 142 Building Materials companies, Universal Cement ranks better than 52.82% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Universal Cement's PEG Ratio or its related term are showing as below:
TPE:1104'
s PEG Ratio Range Over the Past 10 Years
Min: 0.34 Med: 0.78 Max: 20.3
Current: 1.03
During the past 13 years, Universal Cement's highest PEG Ratio was 20.30. The lowest was 0.34. And the median was 0.78.
TPE:1104's PEG Ratio is ranked better than 52.82% of 142
companies
in the Building Materials industry
Industry Median: 1.13
vs TPE:1104: 1.03
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Universal Cement (TPE:1104) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Universal Cement PEG Ratio Related Terms
Universal Cement PEG Ratio Historical Data
* Premium members only.
The historical data trend for Universal Cement's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Building Materials subindustry, Universal Cement's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Universal Cement PEG Ratio vs Building Materials Industry
For the Building Materials industry and Basic Materials sector, Universal Cement's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Universal Cement's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Universal Cement (TPE:1104) has a PEG Ratio of 1.03 as of Jul. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Universal Cement and its competitors. This is 32% above median its historical median of 0.78. Over the past decade, Universal Cement's PEG Ratio has ranged from 0.34 to 20.30. According to the industry distribution chart, Universal Cement ranks #67 out of 142 companies in the Building Materials industry, placing it in the top 47.2%.
Is Universal Cement's PEG Ratio too high?
Universal Cement's current PEG Ratio of 1.03 is 32% above median its 10-year median of 0.78. Over the past 10 years, this metric has ranged from a low of 0.34 to a high of 20.30. The Building Materials industry median PEG Ratio is 1.13. Universal Cement's value of 1.03 is 8.8% below this industry median. Based on the distribution chart, Universal Cement ranks #67 out of 142 companies in the Building Materials industry, which is above the industry midpoint. Overall, Universal Cement has a GF Score™ of 83/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Universal Cement's PEG Ratio compare to CRH and VMC?
According to the Building Materials industry distribution chart, Universal Cement ranks #67 out of 142 companies for PEG Ratio. This puts Universal Cement in the upper half of its industry. The industry median PEG Ratio is 1.13. Universal Cement's value of 1.03 is 8.8% below this benchmark. Historically, Universal Cement's own PEG Ratio has ranged from 0.34 to 20.30 over the past decade. While the company's 10-year median is 0.78 vs. the industry median of 1.13, Universal Cement has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Building Materials company?
The median PEG Ratio among Building Materials companies is 1.13, based on 142 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Universal Cement's current PEG Ratio of 1.03 is 8.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Universal Cement and its competitors. For the Building Materials industry, the median PEG Ratio is 1.13 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Universal Cement's current PEG Ratio is 1.03, which is 32% above median its own 10-year median of 0.78. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Universal Cement stock overvalued right now?
Based on GuruFocus' analysis, Universal Cement (TPE:1104) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$30.39, compared to a current price of NT$27.40 — trading 9.8% below its estimated fair value. The current PEG Ratio is 1.03, which is 32% above median its 10-year median of 0.78 and 8.8% below the Building Materials industry median of 1.13. Universal Cement's overall GF Score™ is 83/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Universal Cement (TPE:1104), the current PEG Ratio is 1.03 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Universal Cement (TPE:1104) Overvalued in 2026?
Based on GuruFocus' analysis, Universal Cement stock appears to be undervalued.
The current stock price of NT$27.40 is trading 9.8% below its estimated GF Value™ of NT$30.39.
GuruFocus considers Universal Cement to be Modestly Undervalued.
Key valuation signals for TPE:1104:
PEG Ratio: 1.03 (32% above median its 10-year median of 0.78)
GF Value™: NT$30.39 vs. price of NT$27.40 (9.8% below fair value)
Industry Position: 8.8% below the Building Materials median (#67 of 142)
No single metric tells the full story. See the TPE:1104 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Universal Cement Corporation is a Taiwan-based company predominantly engaged in manufacturing and selling cement and related construction materials. The company's reportable segments include Building materials and others. The majority of its revenue is generated from the building materials segment which is engaged in manufacturing and selling cement, concrete, and gypsum board. Geographically, key revenue for the company is derived from Taiwan.
83GF Score
Get the complete analysis for TPE:1104
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1104 has been successfully added to your 
