China Metal Products CoTPE:1532 68 PEG Ratio is 9.75 as of Jul. 12, 2026, which is 376% above its 10-year median of 2.05. GuruFocus rates TPE:1532 with a GF Score™ of 68/100 and a GF Value™ of NT$34.56 (Possible Value Trap). The stock has 6 warning signs investors should review. Among 1,276 Industrial Products companies, China Metal Products Co ranks worse than 87.38% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for China Metal Products Co's PEG Ratio or its related term are showing as below:
TPE:1532'
s PEG Ratio Range Over the Past 10 Years
Min: 0.86 Med: 2.05 Max: 182.93
Current: 9.75
During the past 13 years, China Metal Products Co's highest PEG Ratio was 182.93. The lowest was 0.86. And the median was 2.05.
TPE:1532's PEG Ratio is ranked worse than 87.38% of 1276
companies
in the Industrial Products industry
Industry Median: 1.825
vs TPE:1532: 9.75
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
China Metal Products Co (TPE:1532) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Metal Fabrication subindustry, China Metal Products Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
China Metal Products Co PEG Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, China Metal Products Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where China Metal Products Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
China Metal Products Co (TPE:1532) has a PEG Ratio of 9.75 as of Jul. 12, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on China Metal Products Co and its competitors. This is 376% above median its historical median of 2.05. Over the past decade, China Metal Products Co's PEG Ratio has ranged from 0.86 to 182.93. According to the industry distribution chart, China Metal Products Co ranks #1115 out of 1276 companies in the Industrial Products industry, placing it in the top 87.4%.
Is China Metal Products Co's PEG Ratio too high?
China Metal Products Co's current PEG Ratio of 9.75 is 376% above median its 10-year median of 2.05. Over the past 10 years, this metric has ranged from a low of 0.86 to a high of 182.93. The Industrial Products industry median PEG Ratio is 1.83. China Metal Products Co's value of 9.75 is 434.2% above this industry median. Based on the distribution chart, China Metal Products Co ranks #1115 out of 1276 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, China Metal Products Co has a GF Score™ of 68/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does China Metal Products Co's PEG Ratio compare to CRS and ATI?
According to the Industrial Products industry distribution chart, China Metal Products Co ranks #1115 out of 1276 companies for PEG Ratio. This places China Metal Products Co in the lower half of its industry. The industry median PEG Ratio is 1.83. China Metal Products Co's value of 9.75 is 434.2% above this benchmark. Historically, China Metal Products Co's own PEG Ratio has ranged from 0.86 to 182.93 over the past decade. While the company's 10-year median is 2.05 vs. the industry median of 1.83, China Metal Products Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Products company?
The median PEG Ratio among Industrial Products companies is 1.83, based on 1,276 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. China Metal Products Co's current PEG Ratio of 9.75 is 434.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on China Metal Products Co and its competitors. For the Industrial Products industry, the median PEG Ratio is 1.83 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. China Metal Products Co's current PEG Ratio is 9.75, which is 376% above median its own 10-year median of 2.05. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is China Metal Products Co stock overvalued right now?
Based on GuruFocus' analysis, China Metal Products Co (TPE:1532) is currently considered Possible Value Trap. The stock's GF Value™ is NT$34.56, compared to a current price of NT$23.05 — trading 33.3% below its estimated fair value. The current PEG Ratio is 9.75, which is 376% above median its 10-year median of 2.05 and 434.2% above the Industrial Products industry median of 1.83. China Metal Products Co's overall GF Score™ is 68/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For China Metal Products Co (TPE:1532), the current PEG Ratio is 9.75 as of Jul. 12, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is China Metal Products Co (TPE:1532) Overvalued in 2026?
Based on GuruFocus' analysis, China Metal Products Co stock appears to be undervalued.
The current stock price of NT$23.05 is trading 33.3% below its estimated GF Value™ of NT$34.56.
GuruFocus considers China Metal Products Co to be Possible Value Trap.
Key valuation signals for TPE:1532:
PEG Ratio: 9.75 (376% above median its 10-year median of 2.05)
GF Value™: NT$34.56 vs. price of NT$23.05 (33.3% below fair value)
Industry Position: 434.2% above the Industrial Products median (#1115 of 1276)
No single metric tells the full story. See the TPE:1532 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
China Metal Products Co Ltd business activities of the company are iron hardware manufacturing and casting, residents and commercial buildings developing, leasing and selling, acquisitions of the financial claims of financial institutions and department store retailing. The segments are Metal Manufacturing segment and Lifestyle Innovation segment. The company has presence in Taiwan, Unites States, Canada, Japan, China, Europe, South America and Others of which majority of revenue comes from Taiwan itself.
68GF Score
Get the complete analysis for TPE:1532
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1532 has been successfully added to your 
