* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Nankai Tatsumura Construction Co's PEG Ratio or its related term are showing as below:
TSE:1850'
s PEG Ratio Range Over the Past 10 Years
Min: 0.13 Med: 0.36 Max: 1.03
Current: 0.33
During the past 13 years, Nankai Tatsumura Construction Co's highest PEG Ratio was 1.03. The lowest was 0.13. And the median was 0.36.
TSE:1850's PEG Ratio is ranked better than 84.19% of 683
companies
in the Construction industry
Industry Median: 1.13
vs TSE:1850: 0.33
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Nankai Tatsumura Construction Co (TSE:1850) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Nankai Tatsumura Construction Co PEG Ratio Related Terms
Nankai Tatsumura Construction Co PEG Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Engineering & Construction subindustry, Nankai Tatsumura Construction Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Nankai Tatsumura Construction Co PEG Ratio vs Construction Industry
For the Construction industry and Industrials sector, Nankai Tatsumura Construction Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Nankai Tatsumura Construction Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Nankai Tatsumura Construction Co (TSE:1850) has a PEG Ratio of 0.33 as of Jul. 06, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nankai Tatsumura Construction Co and its competitors. This is near median its historical median of 0.36. Over the past decade, Nankai Tatsumura Construction Co's PEG Ratio has ranged from 0.13 to 1.03. According to the industry distribution chart, Nankai Tatsumura Construction Co ranks #108 out of 683 companies in the Construction industry, placing it in the top 15.8%.
Is Nankai Tatsumura Construction Co's PEG Ratio too high?
Nankai Tatsumura Construction Co's current PEG Ratio of 0.33 is near median its 10-year median of 0.36. Over the past 10 years, this metric has ranged from a low of 0.13 to a high of 1.03. The Construction industry median PEG Ratio is 1.13. Nankai Tatsumura Construction Co's value of 0.33 is 70.8% below this industry median. Based on the distribution chart, Nankai Tatsumura Construction Co ranks #108 out of 683 companies in the Construction industry, which is in the top quartile — a strong position relative to peers. Overall, Nankai Tatsumura Construction Co has a GF Score™ of 67/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Nankai Tatsumura Construction Co's PEG Ratio compare to PWR and FIX?
According to the Construction industry distribution chart, Nankai Tatsumura Construction Co ranks #108 out of 683 companies for PEG Ratio. This places Nankai Tatsumura Construction Co in the top 16% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 1.13. Nankai Tatsumura Construction Co's value of 0.33 is 70.8% below this benchmark. Historically, Nankai Tatsumura Construction Co's own PEG Ratio has ranged from 0.13 to 1.03 over the past decade. While the company's 10-year median is 0.36 vs. the industry median of 1.13, Nankai Tatsumura Construction Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Construction company?
The median PEG Ratio among Construction companies is 1.13, based on 683 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Nankai Tatsumura Construction Co's current PEG Ratio of 0.33 is 70.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nankai Tatsumura Construction Co and its competitors. For the Construction industry, the median PEG Ratio is 1.13 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Nankai Tatsumura Construction Co's current PEG Ratio is 0.33, which is near median its own 10-year median of 0.36. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Nankai Tatsumura Construction Co stock overvalued right now?
Based on GuruFocus' analysis, Nankai Tatsumura Construction Co (TSE:1850) is currently considered Modestly Overvalued. The stock's GF Value™ is 円346.95, compared to a current price of 円431.00 — trading 24.2% above its estimated fair value. The current PEG Ratio is 0.33, which is near median its 10-year median of 0.36 and 70.8% below the Construction industry median of 1.13. Nankai Tatsumura Construction Co's overall GF Score™ is 67/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Nankai Tatsumura Construction Co (TSE:1850), the current PEG Ratio is 0.33 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Nankai Tatsumura Construction Co (TSE:1850) Overvalued in 2026?
Based on GuruFocus' analysis, Nankai Tatsumura Construction Co stock appears to be overvalued.
The current stock price of 円431.00 is trading 24.2% above its estimated GF Value™ of 円346.95.
GuruFocus considers Nankai Tatsumura Construction Co to be Modestly Overvalued.
Key valuation signals for TSE:1850:
PEG Ratio: 0.33 (near median its 10-year median of 0.36)
GF Value™: 円346.95 vs. price of 円431.00 (24.2% above fair value)
Industry Position: 70.8% below the Construction median (#108 of 683)
No single metric tells the full story. See the TSE:1850 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Nankai Tatsumura Construction Co Business Description
Nankai Tatsumura Construction Co Ltd is engaged in general construction like civil, construction, pipe, electrical, and telecommunications construction, design industry, buying and selling real estate owned as well as other general construction work.
67GF Score
Get the complete analysis for TSE:1850
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:1850 has been successfully added to your 
