Taihei Machinery WorksTSE:6342 -0.61%81 PEG Ratio is 0.24 as of Jul. 08, 2026, which is 17% below its 10-year median of 0.29. GuruFocus rates TSE:6342 with a GF Score™ of 81/100 and a GF Value™ of 円2,519.52 (Modestly Overvalued). The stock has 6 warning signs investors should review. Among 96 Forest Products companies, Taihei Machinery Works ranks better than 94.79% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Taihei Machinery Works's PEG Ratio or its related term are showing as below:
TSE:6342'
s PEG Ratio Range Over the Past 10 Years
Min: 0.06 Med: 0.29 Max: 0.78
Current: 0.24
During the past 13 years, Taihei Machinery Works's highest PEG Ratio was 0.78. The lowest was 0.06. And the median was 0.29.
TSE:6342's PEG Ratio is ranked better than 94.79% of 96
companies
in the Forest Products industry
Industry Median: 2.375
vs TSE:6342: 0.24
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Taihei Machinery Works (TSE:6342) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Lumber & Wood Production subindustry, Taihei Machinery Works's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Taihei Machinery Works PEG Ratio vs Forest Products Industry
For the Forest Products industry and Basic Materials sector, Taihei Machinery Works's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Taihei Machinery Works's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Taihei Machinery Works (TSE:6342) has a PEG Ratio of 0.24 as of Jul. 08, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Taihei Machinery Works and its competitors. This is 17% below median its historical median of 0.29. Over the past decade, Taihei Machinery Works' PEG Ratio has ranged from 0.06 to 0.78. According to the industry distribution chart, Taihei Machinery Works ranks #5 out of 96 companies in the Forest Products industry, placing it in the top 5.2%.
Is Taihei Machinery Works' PEG Ratio too high?
Taihei Machinery Works' current PEG Ratio of 0.24 is 17% below median its 10-year median of 0.29. Over the past 10 years, this metric has ranged from a low of 0.06 to a high of 0.78. The Forest Products industry median PEG Ratio is 2.38. Taihei Machinery Works' value of 0.24 is 89.9% below this industry median. Based on the distribution chart, Taihei Machinery Works ranks #5 out of 96 companies in the Forest Products industry, which is in the top quartile — a strong position relative to peers. Overall, Taihei Machinery Works has a GF Score™ of 81/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Taihei Machinery Works' PEG Ratio compare to SSD and UFPI?
According to the Forest Products industry distribution chart, Taihei Machinery Works ranks #5 out of 96 companies for PEG Ratio. This places Taihei Machinery Works in the top 5% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 2.38. Taihei Machinery Works' value of 0.24 is 89.9% below this benchmark. Historically, Taihei Machinery Works' own PEG Ratio has ranged from 0.06 to 0.78 over the past decade. While the company's 10-year median is 0.29 vs. the industry median of 2.38, Taihei Machinery Works has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Forest Products company?
The median PEG Ratio among Forest Products companies is 2.38, based on 96 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Taihei Machinery Works's current PEG Ratio of 0.24 is 89.9% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Taihei Machinery Works and its competitors. For the Forest Products industry, the median PEG Ratio is 2.38 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Taihei Machinery Works's current PEG Ratio is 0.24, which is 17% below median its own 10-year median of 0.29. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Taihei Machinery Works stock overvalued right now?
Based on GuruFocus' analysis, Taihei Machinery Works (TSE:6342) is currently considered Modestly Overvalued. The stock's GF Value™ is 円2,519.52, compared to a current price of 円2,792.00 — trading 10.8% above its estimated fair value. The current PEG Ratio is 0.24, which is 17% below median its 10-year median of 0.29 and 89.9% below the Forest Products industry median of 2.38. Taihei Machinery Works' overall GF Score™ is 81/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Taihei Machinery Works (TSE:6342), the current PEG Ratio is 0.24 as of Jul. 08, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Taihei Machinery Works (TSE:6342) Overvalued in 2026?
Based on GuruFocus' analysis, Taihei Machinery Works stock appears to be overvalued.
The current stock price of 円2,792.00 is trading 10.8% above its estimated GF Value™ of 円2,519.52.
GuruFocus considers Taihei Machinery Works to be Modestly Overvalued.
Key valuation signals for TSE:6342:
PEG Ratio: 0.24 (17% below median its 10-year median of 0.29)
GF Value™: 円2,519.52 vs. price of 円2,792.00 (10.8% above fair value)
Industry Position: 89.9% below the Forest Products median (#5 of 96)
No single metric tells the full story. See the TSE:6342 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Taihei Machinery Works Ltd is engaged in the manufacturing and sale of plywood and woodworking machines. It offers plywood plant equipment, LVL production machines, knife grinding machines, chargers, reeling apparatus and dryers among others.
81GF Score
Get the complete analysis for TSE:6342
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6342 has been successfully added to your 
