Sakai Heavy IndustriesTSE:6358 +2.04%79 PEG Ratio is 1.06 as of Jul. 11, 2026, which is 116% above its 10-year median of 0.49. GuruFocus rates TSE:6358 with a GF Score™ of 79/100 and a GF Value™ of 円2,198.17 (Fairly Valued). The stock has 6 warning signs investors should review. Among 105 Farm & Heavy Construction Machinery companies, Sakai Heavy Industries ranks better than 52.38% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Sakai Heavy Industries's PEG Ratio or its related term are showing as below:
TSE:6358'
s PEG Ratio Range Over the Past 10 Years
Min: 0.11 Med: 0.49 Max: 1.06
Current: 1.06
During the past 13 years, Sakai Heavy Industries's highest PEG Ratio was 1.06. The lowest was 0.11. And the median was 0.49.
TSE:6358's PEG Ratio is ranked better than 52.38% of 105
companies
in the Farm & Heavy Construction Machinery industry
Industry Median: 1.05
vs TSE:6358: 1.06
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Sakai Heavy Industries (TSE:6358) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Farm & Heavy Construction Machinery subindustry, Sakai Heavy Industries's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Sakai Heavy Industries PEG Ratio vs Farm & Heavy Construction Machinery Industry
For the Farm & Heavy Construction Machinery industry and Industrials sector, Sakai Heavy Industries's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Sakai Heavy Industries's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Sakai Heavy Industries (TSE:6358) has a PEG Ratio of 1.06 as of Jul. 11, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sakai Heavy Industries and its competitors. This is 116% above median its historical median of 0.49. Over the past decade, Sakai Heavy Industries' PEG Ratio has ranged from 0.11 to 1.06. According to the industry distribution chart, Sakai Heavy Industries ranks #50 out of 105 companies in the Farm & Heavy Construction Machinery industry, placing it in the top 47.6%.
Is Sakai Heavy Industries' PEG Ratio too high?
Sakai Heavy Industries' current PEG Ratio of 1.06 is 116% above median its 10-year median of 0.49. Over the past 10 years, this metric has ranged from a low of 0.11 to a high of 1.06. The Farm & Heavy Construction Machinery industry median PEG Ratio is 1.05. Sakai Heavy Industries' value of 1.06 is 1% above this industry median. Based on the distribution chart, Sakai Heavy Industries ranks #50 out of 105 companies in the Farm & Heavy Construction Machinery industry, which is above the industry midpoint. Overall, Sakai Heavy Industries has a GF Score™ of 79/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Sakai Heavy Industries' PEG Ratio compare to CAT and DE?
According to the Farm & Heavy Construction Machinery industry distribution chart, Sakai Heavy Industries ranks #50 out of 105 companies for PEG Ratio. This puts Sakai Heavy Industries in the upper half of its industry. The industry median PEG Ratio is 1.05. Sakai Heavy Industries' value of 1.06 is 1% above this benchmark. Historically, Sakai Heavy Industries' own PEG Ratio has ranged from 0.11 to 1.06 over the past decade. While the company's 10-year median is 0.49 vs. the industry median of 1.05, Sakai Heavy Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Farm & Heavy Construction Machinery company?
The median PEG Ratio among Farm & Heavy Construction Machinery companies is 1.05, based on 105 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Sakai Heavy Industries's current PEG Ratio of 1.06 is 1% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Sakai Heavy Industries and its competitors. For the Farm & Heavy Construction Machinery industry, the median PEG Ratio is 1.05 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Sakai Heavy Industries's current PEG Ratio is 1.06, which is 116% above median its own 10-year median of 0.49. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Sakai Heavy Industries stock overvalued right now?
Based on GuruFocus' analysis, Sakai Heavy Industries (TSE:6358) is currently considered Fairly Valued. The stock's GF Value™ is 円2,198.17, compared to a current price of 円2,156.00 — trading 1.9% below its estimated fair value. The current PEG Ratio is 1.06, which is 116% above median its 10-year median of 0.49 and 1% above the Farm & Heavy Construction Machinery industry median of 1.05. Sakai Heavy Industries' overall GF Score™ is 79/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Sakai Heavy Industries (TSE:6358), the current PEG Ratio is 1.06 as of Jul. 11, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Sakai Heavy Industries (TSE:6358) Overvalued in 2026?
Based on GuruFocus' analysis, Sakai Heavy Industries stock appears to be undervalued.
The current stock price of 円2,156.00 is trading 1.9% below its estimated GF Value™ of 円2,198.17.
GuruFocus considers Sakai Heavy Industries to be Fairly Valued.
Key valuation signals for TSE:6358:
PEG Ratio: 1.06 (116% above median its 10-year median of 0.49)
GF Value™: 円2,198.17 vs. price of 円2,156.00 (1.9% below fair value)
Industry Position: 1% above the Farm & Heavy Construction Machinery median (#50 of 105)
No single metric tells the full story. See the TSE:6358 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Sakai Heavy Industries Ltd is a Japan-based construction machinery manufacturing company. It is mainly engaged in the manufacturing and sale of compaction, road maintenance, and repair machines. Products offered by the company include earthmoving vibration roller, earthmoving vibration tandem roller, tire roller, macadam roller, vibrating tandem roller, vibrating combined roller, vibrating tire roller, vibrating macadam roller, rammer, plate compactor, backward and reverse plate compactor, handguide roller, road cutter, road stabilizer, asphalt finisher, drainage paving function recovery car, and sprinkler wheel.
79GF Score
Get the complete analysis for TSE:6358
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6358 has been successfully added to your 
