Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Shibaura MechatronicsTSE:6590 +6.35%84 PEG Ratio is 0.93 as of Jul. 21, 2026, which is 191% above its 10-year median of 0.32. GuruFocus rates TSE:6590 with a GF Score™ of 84/100 and a GF Value™ of 円2,253.21 (Significantly Overvalued). Among 856 Hardware companies, Shibaura Mechatronics ranks better than 77.1% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Shibaura Mechatronics's PEG Ratio or its related term are showing as below:
TSE:6590'
s PEG Ratio Range Over the Past 10 Years
Min: 0.1 Med: 0.32 Max: 1.03
Current: 0.93
During the past 13 years, Shibaura Mechatronics's highest PEG Ratio was 1.03. The lowest was 0.10. And the median was 0.32.
TSE:6590's PEG Ratio is ranked better than 77.1% of 856
companies
in the Hardware industry
Industry Median: 2.04
vs TSE:6590: 0.93
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Shibaura Mechatronics (TSE:6590) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Shibaura Mechatronics's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Shibaura Mechatronics PEG Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Shibaura Mechatronics's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Shibaura Mechatronics's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Shibaura Mechatronics (TSE:6590) has a PEG Ratio of 0.93 as of Jul. 21, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shibaura Mechatronics and its competitors. This is 191% above median its historical median of 0.32. Over the past decade, Shibaura Mechatronics' PEG Ratio has ranged from 0.10 to 1.03. According to the industry distribution chart, Shibaura Mechatronics ranks #196 out of 856 companies in the Hardware industry, placing it in the top 22.9%.
Is Shibaura Mechatronics' PEG Ratio too high?
Shibaura Mechatronics' current PEG Ratio of 0.93 is 191% above median its 10-year median of 0.32. Over the past 10 years, this metric has ranged from a low of 0.10 to a high of 1.03. The Hardware industry median PEG Ratio is 2.04. Shibaura Mechatronics' value of 0.93 is 54.4% below this industry median. Based on the distribution chart, Shibaura Mechatronics ranks #196 out of 856 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, Shibaura Mechatronics has a GF Score™ of 84/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Shibaura Mechatronics' PEG Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, Shibaura Mechatronics ranks #196 out of 856 companies for PEG Ratio. This places Shibaura Mechatronics in the top 23% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 2.04. Shibaura Mechatronics' value of 0.93 is 54.4% below this benchmark. Historically, Shibaura Mechatronics' own PEG Ratio has ranged from 0.10 to 1.03 over the past decade. While the company's 10-year median is 0.32 vs. the industry median of 2.04, Shibaura Mechatronics has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Hardware company?
The median PEG Ratio among Hardware companies is 2.04, based on 856 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Shibaura Mechatronics's current PEG Ratio of 0.93 is 54.4% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Shibaura Mechatronics and its competitors. For the Hardware industry, the median PEG Ratio is 2.04 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Shibaura Mechatronics's current PEG Ratio is 0.93, which is 191% above median its own 10-year median of 0.32. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Shibaura Mechatronics stock overvalued right now?
Based on GuruFocus' analysis, Shibaura Mechatronics (TSE:6590) is currently considered Significantly Overvalued. The stock's GF Value™ is 円2,253.21, compared to a current price of 円5,360.00 — trading 137.9% above its estimated fair value. The current PEG Ratio is 0.93, which is 191% above median its 10-year median of 0.32 and 54.4% below the Hardware industry median of 2.04. Shibaura Mechatronics' overall GF Score™ is 84/100. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Shibaura Mechatronics (TSE:6590), the current PEG Ratio is 0.93 as of Jul. 21, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Shibaura Mechatronics (TSE:6590) Overvalued in 2026?
Based on GuruFocus' analysis, Shibaura Mechatronics stock appears to be overvalued.
The current stock price of 円5,360.00 is trading 137.9% above its estimated GF Value™ of 円2,253.21.
GuruFocus considers Shibaura Mechatronics to be Significantly Overvalued.
Key valuation signals for TSE:6590:
PEG Ratio: 0.93 (191% above median its 10-year median of 0.32)
GF Value™: 円2,253.21 vs. price of 円5,360.00 (137.9% above fair value)
Industry Position: 54.4% below the Hardware median (#196 of 856)
No single metric tells the full story. See the TSE:6590 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Shibaura Mechatronics Corp is engaged in the manufacturing and sales of semiconductor manufacturing equipment, FPD manufacturing equipment, vacuum equipment, laser equipment, and ticket vending machines, as well as providing maintenance services and maintaining and upkeeping factory buildings and other facilities. The group's reportable segments are Fine Mechatronics, Mechatronics Systems, Distribution Equipment Systems, and Real Estate Leasing. The majority of its revenue is generated from the Fine Mechatronics segment, which manufactures semiconductor manufacturing equipment, FPD manufacturing equipment, inkjet tablet printing equipment, laser application equipment, microwave application equipment, vacuum pumps, etc.
84GF Score
Get the complete analysis for TSE:6590
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6590 has been successfully added to your 
