Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Di Nikko Engineering CoTSE:6635 +2.62%61 PEG Ratio is 2.97 as of Jul. 21, 2026, which is 138% above its 10-year median of 1.25. GuruFocus rates TSE:6635 with a GF Score™ of 61/100 and a GF Value™ of 円491.32 (Significantly Overvalued). The stock has 5 warning signs investors should review. Among 856 Hardware companies, Di Nikko Engineering Co ranks worse than 59.93% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Di Nikko Engineering Co's PEG Ratio or its related term are showing as below:
TSE:6635'
s PEG Ratio Range Over the Past 10 Years
Min: 1.05 Med: 1.25 Max: 3.63
Current: 2.97
During the past 13 years, Di Nikko Engineering Co's highest PEG Ratio was 3.63. The lowest was 1.05. And the median was 1.25.
TSE:6635's PEG Ratio is ranked worse than 59.93% of 856
companies
in the Hardware industry
Industry Median: 2.04
vs TSE:6635: 2.97
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Di Nikko Engineering Co (TSE:6635) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Di Nikko Engineering Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Di Nikko Engineering Co PEG Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Di Nikko Engineering Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Di Nikko Engineering Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Di Nikko Engineering Co (TSE:6635) has a PEG Ratio of 2.97 as of Jul. 21, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Di Nikko Engineering Co and its competitors. This is 138% above median its historical median of 1.25. Over the past decade, Di Nikko Engineering Co's PEG Ratio has ranged from 1.05 to 3.63. According to the industry distribution chart, Di Nikko Engineering Co ranks #513 out of 856 companies in the Hardware industry, placing it in the top 59.9%.
Is Di Nikko Engineering Co's PEG Ratio too high?
Di Nikko Engineering Co's current PEG Ratio of 2.97 is 138% above median its 10-year median of 1.25. Over the past 10 years, this metric has ranged from a low of 1.05 to a high of 3.63. The Hardware industry median PEG Ratio is 2.04. Di Nikko Engineering Co's value of 2.97 is 45.6% above this industry median. Based on the distribution chart, Di Nikko Engineering Co ranks #513 out of 856 companies in the Hardware industry, which is below the industry midpoint. Overall, Di Nikko Engineering Co has a GF Score™ of 61/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Di Nikko Engineering Co's PEG Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, Di Nikko Engineering Co ranks #513 out of 856 companies for PEG Ratio. This places Di Nikko Engineering Co in the lower half of its industry. The industry median PEG Ratio is 2.04. Di Nikko Engineering Co's value of 2.97 is 45.6% above this benchmark. Historically, Di Nikko Engineering Co's own PEG Ratio has ranged from 1.05 to 3.63 over the past decade. While the company's 10-year median is 1.25 vs. the industry median of 2.04, Di Nikko Engineering Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Hardware company?
The median PEG Ratio among Hardware companies is 2.04, based on 856 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Di Nikko Engineering Co's current PEG Ratio of 2.97 is 45.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Di Nikko Engineering Co and its competitors. For the Hardware industry, the median PEG Ratio is 2.04 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Di Nikko Engineering Co's current PEG Ratio is 2.97, which is 138% above median its own 10-year median of 1.25. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Di Nikko Engineering Co stock overvalued right now?
Based on GuruFocus' analysis, Di Nikko Engineering Co (TSE:6635) is currently considered Significantly Overvalued. The stock's GF Value™ is 円491.32, compared to a current price of 円666.00 — trading 35.6% above its estimated fair value. The current PEG Ratio is 2.97, which is 138% above median its 10-year median of 1.25 and 45.6% above the Hardware industry median of 2.04. Di Nikko Engineering Co's overall GF Score™ is 61/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Di Nikko Engineering Co (TSE:6635), the current PEG Ratio is 2.97 as of Jul. 21, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Di Nikko Engineering Co (TSE:6635) Overvalued in 2026?
Based on GuruFocus' analysis, Di Nikko Engineering Co stock appears to be overvalued.
The current stock price of 円666.00 is trading 35.6% above its estimated GF Value™ of 円491.32.
GuruFocus considers Di Nikko Engineering Co to be Significantly Overvalued.
Key valuation signals for TSE:6635:
PEG Ratio: 2.97 (138% above median its 10-year median of 1.25)
GF Value™: 円491.32 vs. price of 円666.00 (35.6% above fair value)
Industry Position: 45.6% above the Hardware median (#513 of 856)
No single metric tells the full story. See the TSE:6635 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Di Nikko Engineering Co Ltd engages in the design, test, manufacture, distribution, and return/repair of electronic components and assemblies for original equipment manufacturers in Japan. Its services include the design to production of the circuit implementation of an electronic board used for an electronics product, an OA apparatus, optical goods, and communications equipment. Geographically company manages in two segments Japan and Asia.
61GF Score
Get the complete analysis for TSE:6635
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6635 has been successfully added to your 
