Nippon Ceramic CoTSE:6929 94 PEG Ratio is 0.86 as of Jul. 09, 2026, which is 67% below its 10-year median of 2.58. GuruFocus rates TSE:6929 with a GF Score™ of 94/100 and a GF Value™ of 円3,327.07 (Modestly Overvalued). The stock has 4 warning signs investors should review. Among 855 Hardware companies, Nippon Ceramic Co ranks better than 78.01% on this metric.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Nippon Ceramic Co's PEG Ratio or its related term are showing as below:
TSE:6929'
s PEG Ratio Range Over the Past 10 Years
Min: 0.76 Med: 2.58 Max: 81.39
Current: 0.86
During the past 13 years, Nippon Ceramic Co's highest PEG Ratio was 81.39. The lowest was 0.76. And the median was 2.58.
TSE:6929's PEG Ratio is ranked better than 78.01% of 855
companies
in the Hardware industry
Industry Median: 2.16
vs TSE:6929: 0.86
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Nippon Ceramic Co (TSE:6929) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Nippon Ceramic Co PEG Ratio Related Terms
Nippon Ceramic Co PEG Ratio Historical Data
* Premium members only.
The historical data trend for Nippon Ceramic Co's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Electronic Components subindustry, Nippon Ceramic Co's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Nippon Ceramic Co PEG Ratio vs Hardware Industry
For the Hardware industry and Technology sector, Nippon Ceramic Co's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Nippon Ceramic Co's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Nippon Ceramic Co (TSE:6929) has a PEG Ratio of 0.86 as of Jul. 09, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nippon Ceramic Co and its competitors. This is 67% below median its historical median of 2.58. Over the past decade, Nippon Ceramic Co's PEG Ratio has ranged from 0.76 to 81.39. According to the industry distribution chart, Nippon Ceramic Co ranks #188 out of 855 companies in the Hardware industry, placing it in the top 22%.
Is Nippon Ceramic Co's PEG Ratio too high?
Nippon Ceramic Co's current PEG Ratio of 0.86 is 67% below median its 10-year median of 2.58. Over the past 10 years, this metric has ranged from a low of 0.76 to a high of 81.39. The Hardware industry median PEG Ratio is 2.16. Nippon Ceramic Co's value of 0.86 is 60.2% below this industry median. Based on the distribution chart, Nippon Ceramic Co ranks #188 out of 855 companies in the Hardware industry, which is in the top quartile — a strong position relative to peers. Overall, Nippon Ceramic Co has a GF Score™ of 94/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Nippon Ceramic Co's PEG Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, Nippon Ceramic Co ranks #188 out of 855 companies for PEG Ratio. This places Nippon Ceramic Co in the top 22% of its industry — outperforming the majority of peers. The industry median PEG Ratio is 2.16. Nippon Ceramic Co's value of 0.86 is 60.2% below this benchmark. Historically, Nippon Ceramic Co's own PEG Ratio has ranged from 0.76 to 81.39 over the past decade. While the company's 10-year median is 2.58 vs. the industry median of 2.16, Nippon Ceramic Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for a Hardware company?
The median PEG Ratio among Hardware companies is 2.16, based on 855 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Nippon Ceramic Co's current PEG Ratio of 0.86 is 60.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Nippon Ceramic Co and its competitors. For the Hardware industry, the median PEG Ratio is 2.16 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Nippon Ceramic Co's current PEG Ratio is 0.86, which is 67% below median its own 10-year median of 2.58. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Nippon Ceramic Co stock overvalued right now?
Based on GuruFocus' analysis, Nippon Ceramic Co (TSE:6929) is currently considered Modestly Overvalued. The stock's GF Value™ is 円3,327.07, compared to a current price of 円3,710.00 — trading 11.5% above its estimated fair value. The current PEG Ratio is 0.86, which is 67% below median its 10-year median of 2.58 and 60.2% below the Hardware industry median of 2.16. Nippon Ceramic Co's overall GF Score™ is 94/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Nippon Ceramic Co (TSE:6929), the current PEG Ratio is 0.86 as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Nippon Ceramic Co (TSE:6929) Overvalued in 2026?
Based on GuruFocus' analysis, Nippon Ceramic Co stock appears to be overvalued.
The current stock price of 円3,710.00 is trading 11.5% above its estimated GF Value™ of 円3,327.07.
GuruFocus considers Nippon Ceramic Co to be Modestly Overvalued.
Key valuation signals for TSE:6929:
PEG Ratio: 0.86 (67% below median its 10-year median of 2.58)
GF Value™: 円3,327.07 vs. price of 円3,710.00 (11.5% above fair value)
Industry Position: 60.2% below the Hardware median (#188 of 855)
No single metric tells the full story. See the TSE:6929 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Nippon Ceramic Co Ltd is a Japan based company engaged in development, manufacturing and sale of ceramic sensors, ferrite, module and others. Its products are applicable for household equipment and plant facilities; automobiles; home electronics and office automation equipment; and electronics. Its Household equipment & plant faculties include lighting, sensor, security system, fire detection sensor etc. In automobile industry its products are applicable in sensor, DC- DC Converter, charging & discharging battery etc. Its products in home electronics include Microwave, airconditioner and IH cooker. Under electronics industry its products are power supplies, fan motors, inverters.
94GF Score
Get the complete analysis for TSE:6929
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6929 has been successfully added to your 
