StalprofilWAR:STF -0.23%80 PEG Ratio is 1.89 as of Jun. 30, 2026, which is 2000% above its 10-year median of 0.09. GuruFocus rates WAR:STF with a GF Score™ of 80/100 and a GF Value™ of zł11.65 (Modestly Undervalued). The stock has 5 warning signs investors should review. Among 90 Industrial Distribution companies, Stalprofil ranks worse than 61.11% on this metric.
PE Ratio without NRI / 5-Year EBITDA Growth Rate*
PEG Ratio is defined as the PE Ratio without NRI divided by the growth ratio. The growth rate we use is the 5-Year EBITDA growth rate. As of today, Stalprofil's PE Ratio without NRI is 7.56. Stalprofil's 5-Year EBITDA growth rate is 4.00%. Therefore, Stalprofil's PEG Ratio for today is 1.89.
* The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
The historical rank and industry rank for Stalprofil's PEG Ratio or its related term are showing as below:
WAR:STF'
s PEG Ratio Range Over the Past 10 Years
Min: 0.03 Med: 0.09 Max: 94.92
Current: 1.89
During the past 13 years, Stalprofil's highest PEG Ratio was 94.92. The lowest was 0.03. And the median was 0.09.
WAR:STF's PEG Ratio is ranked worse than 61.11% of 90
companies
in the Industrial Distribution industry
Industry Median: 1.37
vs WAR:STF: 1.89
Peter Lynch thinks a company with a P/E ratio equal to its growth rate is fairly valued.
Stalprofil (WAR:STF) PEG Ratio Explanation
To compare stocks with different growth rates, Peter Lynch invented a ratio called PEG Ratio. PEG Ratio is defined as the P/E ratio divided by the growth ratio. He thinks a company with a P/E ratio equal to its growth rate is fairly valued. Still he said he would rather buy a company growing 20% a year with a P/E of 20, instead of a company growing 10% a year with a P/E of 10.
Stalprofil PEG Ratio Related Terms
Stalprofil PEG Ratio Historical Data
* Premium members only.
The historical data trend for Stalprofil's PEG Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Industrial Distribution subindustry, Stalprofil's PEG Ratio, along with its competitors' market caps and PEG Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Stalprofil PEG Ratio vs Industrial Distribution Industry
For the Industrial Distribution industry and Industrials sector, Stalprofil's PEG Ratio distribution charts can be found below:
* The bar in red indicates where Stalprofil's PEG Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
* Note: The 5-Year EBITDA Growth Rate is the 5-year average EBITDA per share growth rate. While the denominator is a percentage, we use the whole number as opposed to the decimal form for the calculation. For example, 5% would be shown as 5 as opposed to 0.05. If it's smaller than or equal to 0, then the PEG Ratio is not calculated.
Stalprofil (WAR:STF) has a PEG Ratio of 1.89 as of Jun. 30, 2026. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Stalprofil and its competitors. This is 2000% above median its historical median of 0.09. Over the past decade, Stalprofil's PEG Ratio has ranged from 0.03 to 94.92. According to the industry distribution chart, Stalprofil ranks #55 out of 90 companies in the Industrial Distribution industry, placing it in the top 61.1%.
Is Stalprofil's PEG Ratio too high?
Stalprofil's current PEG Ratio of 1.89 is 2000% above median its 10-year median of 0.09. Over the past 10 years, this metric has ranged from a low of 0.03 to a high of 94.92. The Industrial Distribution industry median PEG Ratio is 1.37. Stalprofil's value of 1.89 is 38% above this industry median. Based on the distribution chart, Stalprofil ranks #55 out of 90 companies in the Industrial Distribution industry, which is below the industry midpoint. Overall, Stalprofil has a GF Score™ of 80/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Stalprofil's PEG Ratio compare to GWW and FAST?
According to the Industrial Distribution industry distribution chart, Stalprofil ranks #55 out of 90 companies for PEG Ratio. This places Stalprofil in the lower half of its industry. The industry median PEG Ratio is 1.37. Stalprofil's value of 1.89 is 38% above this benchmark. Historically, Stalprofil's own PEG Ratio has ranged from 0.03 to 94.92 over the past decade. While the company's 10-year median is 0.09 vs. the industry median of 1.37, Stalprofil has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PEG Ratio for an Industrial Distribution company?
The median PEG Ratio among Industrial Distribution companies is 1.37, based on 90 companies in the industry. Companies in the top quartile (top 25%) have a PEG Ratio significantly above this median, while those in the bottom quartile fall well below. However, PEG Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Stalprofil's current PEG Ratio of 1.89 is 38% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PEG Ratio mean?
A high PEG Ratio can signal that a stock is expensive relative to its fundamentals. Price-earnings to growth ratio is the ratio of price-earnings to a company's earnings growth rate. View historical data on Stalprofil and its competitors. For the Industrial Distribution industry, the median PEG Ratio is 1.37 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Stalprofil's current PEG Ratio is 1.89, which is 2000% above median its own 10-year median of 0.09. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Stalprofil stock overvalued right now?
Based on GuruFocus' analysis, Stalprofil (WAR:STF) is currently considered Modestly Undervalued. The stock's GF Value™ is zł11.65, compared to a current price of zł8.80 — trading 24.5% below its estimated fair value. The current PEG Ratio is 1.89, which is 2000% above median its 10-year median of 0.09 and 38% above the Industrial Distribution industry median of 1.37. Stalprofil's overall GF Score™ is 80/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PEG Ratio calculated?
PEG Ratio is calculated from a company's financial statements. For Stalprofil (WAR:STF), the current PEG Ratio is 1.89 as of Jun. 30, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Stalprofil (WAR:STF) Overvalued in 2026?
Based on GuruFocus' analysis, Stalprofil stock appears to be undervalued.
The current stock price of zł8.80 is trading 24.5% below its estimated GF Value™ of zł11.65.
GuruFocus considers Stalprofil to be Modestly Undervalued.
Key valuation signals for WAR:STF:
PEG Ratio: 1.89 (2000% above median its 10-year median of 0.09)
GF Value™: zł11.65 vs. price of zł8.80 (24.5% below fair value)
Industry Position: 38% above the Industrial Distribution median (#55 of 90)
No single metric tells the full story. See the WAR:STF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Stalprofil SA is a Poland-based company, which is engaged in the steel industry. The company distributes metallurgical products and semi-finished steel. Its product portfolio includes: angle sections, channel sections, flat bars, hot rolled steel profiles, hot rolled angles, cold formed profiles, reinforcing ribbed bars, sheets, and plates, I-sections, T-bars, as well as wire rods and smooth rods. It operates its distribution network through two warehouses in Dabrowa Gornicza and Katowice. Stalprofil SA mainly exports its products to the European Union countries, as well as to Norway, Turkey, Ukraine, and Belarus. Its subsidiaries are engaged in the construction of the gas, heating, water and sewage systems and the production of steel structures.
80GF Score
Get the complete analysis for WAR:STF
PEG Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
WAR:STF has been successfully added to your 
