Micron Machinery CoTSE:6159 -1.44%78 Pretax Margin % is 33.23% as of Feb. 2026, which is 99% above its 10-year median of 16.71. GuruFocus rates TSE:6159 with a GF Score™ of 78/100 and a GF Value™ of 円1,787.28 (Fairly Valued). The stock has 3 warning signs investors should review. Among 3,033 Industrial Products companies, Micron Machinery Co ranks better than 89.91% on this metric.
The historical rank and industry rank for Micron Machinery Co's Pretax Margin % or its related term are showing as below:
TSE:6159'
s Pretax Margin % Range Over the Past 10 Years
Min: 12.65 Med: 16.71 Max: 34.65
Current: 19.49
TSE:6159's Pretax Margin % is ranked better than 89.91% of 3033
companies
in the Industrial Products industry
Industry Median: 5.81
vs TSE:6159: 19.49
Micron Machinery Co (TSE:6159) Pretax Margin % Explanation
The pretax margin, as know as pretax profit margin, is widely used to measure the operating efficiency of a company before deducting taxes.
The pretax margin is sometimes preferred over the net margin as tax expenditures can make profitability comparisons between companies misleading.
It is a useful tool to compare companies operating in the same sector and less effective when comparing companies from other sectors as each industry generally has different operating expenses and sales patterns.
The long term trend of the pretax margin is a good indicator of the competitiveness and health of the business.
Micron Machinery Co Pretax Margin % Related Terms
Micron Machinery Co Pretax Margin % Historical Data
* Premium members only.
The historical data trend for Micron Machinery Co's Pretax Margin % can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6159 vs GEV, ETN, PH: Pretax Margin % Comparison
For the Specialty Industrial Machinery subindustry, Micron Machinery Co's Pretax Margin %, along with its competitors' market caps and Pretax Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Micron Machinery Co Pretax Margin % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Micron Machinery Co's Pretax Margin % distribution charts can be found below:
* The bar in red indicates where Micron Machinery Co's Pretax Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Micron Machinery Co (TSE:6159) has a Pretax Margin % of 33.23% as of Feb. 2026. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Micron Machinery Co and its competitors. This is 99% above median its historical median of 16.71. Over the past decade, Micron Machinery Co's Pretax Margin % has ranged from 12.65 to 34.65. According to the industry distribution chart, Micron Machinery Co ranks #306 out of 3033 companies in the Industrial Products industry, placing it in the top 10.1%.
Is Micron Machinery Co's Pretax Margin % too high?
Micron Machinery Co's current Pretax Margin % of 33.23% is 99% above median its 10-year median of 16.71. Over the past 10 years, this metric has ranged from a low of 12.65 to a high of 34.65. The Industrial Products industry median Pretax Margin % is 5.81. Micron Machinery Co's value of 33.23% is 471.9% above this industry median. Based on the distribution chart, Micron Machinery Co ranks #306 out of 3033 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Micron Machinery Co has a GF Score™ of 78/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Micron Machinery Co's Pretax Margin % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Micron Machinery Co ranks #306 out of 3033 companies for Pretax Margin %. This places Micron Machinery Co in the top 10% of its industry — outperforming the majority of peers. The industry median Pretax Margin % is 5.81. Micron Machinery Co's value of 33.23% is 471.9% above this benchmark. Historically, Micron Machinery Co's own Pretax Margin % has ranged from 12.65 to 34.65 over the past decade. While the company's 10-year median is 16.71 vs. the industry median of 5.81, Micron Machinery Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Pretax Margin % for an Industrial Products company?
The median Pretax Margin % among Industrial Products companies is 5.81, based on 3,033 companies in the industry. Companies in the top quartile (top 25%) have a Pretax Margin % significantly above this median, while those in the bottom quartile fall well below. However, Pretax Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Micron Machinery Co's current Pretax Margin % of 33.23% is 471.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Pretax Margin % mean?
A high Pretax Margin % can signal that a stock is expensive relative to its fundamentals. Pre-Tax margin is the ratio of total pre-tax income to net sales. View historical data on Micron Machinery Co and its competitors. For the Industrial Products industry, the median Pretax Margin % is 5.81 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Micron Machinery Co's current Pretax Margin % is 33.23%, which is 99% above median its own 10-year median of 16.71. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Micron Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Micron Machinery Co (TSE:6159) is currently considered Fairly Valued. The stock's GF Value™ is 円1,787.28, compared to a current price of 円1,922.00 — trading 7.5% above its estimated fair value. The current Pretax Margin % is 33.23%, which is 99% above median its 10-year median of 16.71 and 471.9% above the Industrial Products industry median of 5.81. Micron Machinery Co's overall GF Score™ is 78/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Pretax Margin % calculated?
Pretax Margin % is calculated from a company's financial statements. For Micron Machinery Co (TSE:6159), the current Pretax Margin % is 33.23% as of Feb. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Micron Machinery Co (TSE:6159) Overvalued in 2026?
Based on GuruFocus' analysis, Micron Machinery Co stock appears to be overvalued.
The current stock price of 円1,922.00 is trading 7.5% above its estimated GF Value™ of 円1,787.28.
GuruFocus considers Micron Machinery Co to be Fairly Valued.
Key valuation signals for TSE:6159:
Pretax Margin %: 33.23% (99% above median its 10-year median of 16.71)
GF Value™: 円1,787.28 vs. price of 円1,922.00 (7.5% above fair value)
Industry Position: 471.9% above the Industrial Products median (#306 of 3033)
No single metric tells the full story. See the TSE:6159 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Micron Machinery Co Ltd is engaged in manufacturing and selling grinding machines in Japan. Its products include centerless and internal grinders. The company also exports its products to Australia, Austria, Brazil, Canada, Switzerland, China, the Czech Republic, Spain and France among other countries.
78GF Score
Get the complete analysis for TSE:6159
Pretax Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6159 has been successfully added to your 
