Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Micron Machinery CoTSE:6159 +3.37%81 5-Year Yield-on-Cost % is 0.63 as of Aug. 12, 2026, which is 29% below its 10-year median of 0.89. GuruFocus rates TSE:6159 with a GF Score™ of 81/100 and a GF Value™ of 円2,330.06 (Modestly Undervalued). The stock has 2 warning signs investors should review. Among 1,902 Industrial Products companies, Micron Machinery Co ranks worse than 75.92% on this metric.
Micron Machinery Co's yield on cost for the quarter that ended in Feb. 2026 was 0.63.
The historical rank and industry rank for Micron Machinery Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TSE:6159'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.35 Med: 0.89 Max: 2.14
Current: 0.63
During the past 13 years, Micron Machinery Co's highest Yield on Cost was 2.14. The lowest was 0.35. And the median was 0.89.
TSE:6159's 5-Year Yield-on-Cost % is ranked worse than 75.92% of 1902
companies
in the Industrial Products industry
Industry Median: 1.885
vs TSE:6159: 0.63
Micron Machinery Co (TSE:6159) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Micron Machinery Co 5-Year Yield-on-Cost % Related Terms
TSE:6159 vs GEV, ETN, PH: 5-Year Yield-on-Cost % Comparison
For the Specialty Industrial Machinery subindustry, Micron Machinery Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Micron Machinery Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Micron Machinery Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Micron Machinery Co's 5-Year Yield-on-Cost % falls into.
Micron Machinery Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Micron Machinery Co (TSE:6159) has a 5-Year Yield-on-Cost % of 0.63 as of Aug. 12, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Micron Machinery Co and its competitors. This is 29% below median its historical median of 0.89. Over the past decade, Micron Machinery Co's 5-Year Yield-on-Cost % has ranged from 0.35 to 2.14. According to the industry distribution chart, Micron Machinery Co ranks #1444 out of 1902 companies in the Industrial Products industry, placing it in the top 75.9%.
Is Micron Machinery Co's 5-Year Yield-on-Cost % too high?
Micron Machinery Co's current 5-Year Yield-on-Cost % of 0.63 is 29% below median its 10-year median of 0.89. Over the past 10 years, this metric has ranged from a low of 0.35 to a high of 2.14. The Industrial Products industry median 5-Year Yield-on-Cost % is 1.89. Micron Machinery Co's value of 0.63 is 66.6% below this industry median. Based on the distribution chart, Micron Machinery Co ranks #1444 out of 1902 companies in the Industrial Products industry, which is in the bottom quartile relative to peers. Overall, Micron Machinery Co has a GF Score™ of 81/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Micron Machinery Co's 5-Year Yield-on-Cost % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Micron Machinery Co ranks #1444 out of 1902 companies for 5-Year Yield-on-Cost %. This places Micron Machinery Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 1.89. Micron Machinery Co's value of 0.63 is 66.6% below this benchmark. Historically, Micron Machinery Co's own 5-Year Yield-on-Cost % has ranged from 0.35 to 2.14 over the past decade. While the company's 10-year median is 0.89 vs. the industry median of 1.89, Micron Machinery Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 1.89, based on 1,902 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Micron Machinery Co's current 5-Year Yield-on-Cost % of 0.63 is 66.6% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Micron Machinery Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 1.89 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Micron Machinery Co's current 5-Year Yield-on-Cost % is 0.63, which is 29% below median its own 10-year median of 0.89. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Micron Machinery Co stock overvalued right now?
Based on GuruFocus' analysis, Micron Machinery Co (TSE:6159) is currently considered Modestly Undervalued. The stock's GF Value™ is 円2,330.06, compared to a current price of 円1,900.00 — trading 18.5% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.63, which is 29% below median its 10-year median of 0.89 and 66.6% below the Industrial Products industry median of 1.89. Micron Machinery Co's overall GF Score™ is 81/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Micron Machinery Co (TSE:6159), the current 5-Year Yield-on-Cost % is 0.63 as of Aug. 12, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Micron Machinery Co (TSE:6159) Overvalued in 2026?
Based on GuruFocus' analysis, Micron Machinery Co stock appears to be undervalued.
The current stock price of 円1,900.00 is trading 18.5% below its estimated GF Value™ of 円2,330.06.
GuruFocus considers Micron Machinery Co to be Modestly Undervalued.
Key valuation signals for TSE:6159:
5-Year Yield-on-Cost %: 0.63 (29% below median its 10-year median of 0.89)
GF Value™: 円2,330.06 vs. price of 円1,900.00 (18.5% below fair value)
Industry Position: 66.6% below the Industrial Products median (#1444 of 1902)
No single metric tells the full story. See the TSE:6159 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Micron Machinery Co Ltd is engaged in manufacturing and selling grinding machines in Japan. Its products include centerless and internal grinders. The company also exports its products to Australia, Austria, Brazil, Canada, Switzerland, China, the Czech Republic, Spain and France among other countries.
81GF Score
Get the complete analysis for TSE:6159
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6159 has been successfully added to your 
