Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Unimit Engineering PCLBKK:UEC-R 49 Price-to-Tangible-Book is 0.34 as of Jul. 18, 2026, which is 50% below its 10-year median of 0.68. GuruFocus rates BKK:UEC-R with a GF Score™ of 49/100 and a GF Value™ of ฿0.62. The stock has 7 warning signs investors should review. Among 603 Steel companies, Unimit Engineering PCL ranks better than 80.93% on this metric.
Some businesses have very light assets, such as software companies or insurance agencies. The Price-to-Book Ratio does not work well for these companies. Some companies even have negative equity, so the Price-to-Book Ratio cannot be applied to them.
Unimit Engineering PCL Price-to-Tangible-Book Related Terms
Unimit Engineering PCL Price-to-Tangible-Book Historical Data
* Premium members only.
The historical data trend for Unimit Engineering PCL's Price-to-Tangible-Book can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:UEC-R vs NUE, STLD, RS: Price-to-Tangible-Book Comparison
For the Steel subindustry, Unimit Engineering PCL's Price-to-Tangible-Book, along with its competitors' market caps and Price-to-Tangible-Book data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Unimit Engineering PCL Price-to-Tangible-Book vs Steel Industry
For the Steel industry and Basic Materials sector, Unimit Engineering PCL's Price-to-Tangible-Book distribution charts can be found below:
* The bar in red indicates where Unimit Engineering PCL's Price-to-Tangible-Book falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
A closely related ratio is called PB Ratio. The difference between Price-to-Tangible-Book Ratio and PB Ratio is that book value other than intangibles are used in the calculation.
Unimit Engineering PCL (BKK:UEC-R) has a Price-to-Tangible-Book of 0.34 as of Jul. 18, 2026. Price-to-tangible-book ratio is the ratio of share price to a company's tangible book value per share. View historical data on Unimit Engineering PCL and its competitors. This is 50% below median its historical median of 0.68. Over the past decade, Unimit Engineering PCL's Price-to-Tangible-Book has ranged from 0.25 to 1.17. According to the industry distribution chart, Unimit Engineering PCL ranks #115 out of 603 companies in the Steel industry, placing it in the top 19.1%.
Is Unimit Engineering PCL's Price-to-Tangible-Book too high?
Unimit Engineering PCL's current Price-to-Tangible-Book of 0.34 is 50% below median its 10-year median of 0.68. Over the past 10 years, this metric has ranged from a low of 0.25 to a high of 1.17. The Steel industry median Price-to-Tangible-Book is 1.02. Unimit Engineering PCL's value of 0.34 is 66.7% below this industry median. Based on the distribution chart, Unimit Engineering PCL ranks #115 out of 603 companies in the Steel industry, which is in the top quartile — a strong position relative to peers. Overall, Unimit Engineering PCL has a GF Score™ of 49/100, reflecting its overall financial health beyond just this single metric.
How does Unimit Engineering PCL's Price-to-Tangible-Book compare to NUE and STLD?
According to the Steel industry distribution chart, Unimit Engineering PCL ranks #115 out of 603 companies for Price-to-Tangible-Book. This places Unimit Engineering PCL in the top 19% of its industry — outperforming the majority of peers. The industry median Price-to-Tangible-Book is 1.02. Unimit Engineering PCL's value of 0.34 is 66.7% below this benchmark. Historically, Unimit Engineering PCL's own Price-to-Tangible-Book has ranged from 0.25 to 1.17 over the past decade. While the company's 10-year median is 0.68 vs. the industry median of 1.02, Unimit Engineering PCL has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Price-to-Tangible-Book for a Steel company?
The median Price-to-Tangible-Book among Steel companies is 1.02, based on 603 companies in the industry. Companies in the top quartile (top 25%) have a Price-to-Tangible-Book significantly above this median, while those in the bottom quartile fall well below. However, Price-to-Tangible-Book should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Unimit Engineering PCL's current Price-to-Tangible-Book of 0.34 is 66.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Price-to-Tangible-Book mean?
A high Price-to-Tangible-Book can signal that a stock is expensive relative to its fundamentals. Price-to-tangible-book ratio is the ratio of share price to a company's tangible book value per share. View historical data on Unimit Engineering PCL and its competitors. For the Steel industry, the median Price-to-Tangible-Book is 1.02 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Unimit Engineering PCL's current Price-to-Tangible-Book is 0.34, which is 50% below median its own 10-year median of 0.68. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Unimit Engineering PCL stock overvalued right now?
Unimit Engineering PCL (BKK:UEC-R) has a current Price-to-Tangible-Book of 0.34. The stock's GF Value™ is ฿0.62, compared to a current price of ฿0.62 — trading right at its estimated fair value. The current Price-to-Tangible-Book is 0.34, which is 50% below median its 10-year median of 0.68 and 66.7% below the Steel industry median of 1.02. Unimit Engineering PCL's overall GF Score™ is 49/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Price-to-Tangible-Book calculated?
Price-to-Tangible-Book is calculated from a company's financial statements. For Unimit Engineering PCL (BKK:UEC-R), the current Price-to-Tangible-Book is 0.34 as of Jul. 18, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Unimit Engineering PCL (BKK:UEC-R) Overvalued in 2026?
Based on GuruFocus' analysis, Unimit Engineering PCL stock appears to be undervalued.
The current stock price of ฿0.62 is trading 0% below its estimated GF Value™ of ฿0.62.
Key valuation signals for BKK:UEC-R:
Price-to-Tangible-Book: 0.34 (50% below median its 10-year median of 0.68)
GF Value™: ฿0.62 vs. price of ฿0.62 (0% below fair value)
Industry Position: 66.7% below the Steel median (#115 of 603)
No single metric tells the full story. See the BKK:UEC-R stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Unimit Engineering PCL is engaged in designing, shop fabrication, field installation, and erection of steel products and construction works such as pressurized equipment and vessels, non-pressure storage, mechanical parts, and piping systems. Its products include Pressure Vessels; Machinery Parts; Storage Tanks; Structure/Piping; and Mechanical Installation. The Group is principally engaged in the steel products. Geographically, the company derives maximum revenue from the domestic market and also exports its products to other regions.
49GF Score
Get the complete analysis for BKK:UEC-R
Price-to-Tangible-Book is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:UEC-R has been successfully added to your 
