AT&S Austria Technologie & Systemtechnik AG (MIL:1ATS) PS Ratio Explanation
The PS Ratio is an excellent valuation indicator if you want to compare a stock with its historical valuation or with the stocks in the same industry. The PS Ratio works especially well when you want to compare the stock's current valuation with its historical valuation. The PS Ratio is a great valuation tool for evaluating cyclical businesses where the PE Ratio works poorly. It works the best when comparing the current valuation with the historical valuation because over time, a company's profit margin tends to revert to the mean.
When the PS Ratio is applied to the whole stock market, it can be used to evaluate the current market valuation and projected returns. In this case, the price is the total market cap of all stocks that are traded, and sales are the GDP of the country. This is how Warren Buffett estimates the broad market valuation and project future returns.
The PS Ratio does not tell you how cheap or expensive the stock is. It cannot be used to compare companies in different industries. It works better for companies within the same industry because these companies tend to have similar capital structures and profit margins. It works the best when comparing a company with itself in the past.
AT&S Austria Technologie & Systemtechnik AG PS Ratio Related Terms
AT&S Austria Technologie & Systemtechnik AG PS Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
AT&S Austria Technologie & Systemtechnik AG PS Ratio Chart
AT&S Austria Technologie & Systemtechnik AG Annual Data
For the Electronic Components subindustry, AT&S Austria Technologie & Systemtechnik AG's PS Ratio, along with its competitors' market caps and PS Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
AT&S Austria Technologie & Systemtechnik AG PS Ratio vs Hardware Industry
AT&S Austria Technologie & Systemtechnik AG PS Ratio Calculation
The PS Ratio, or Price-to-Sales ratio, or Price/Sales, is a financial ratio used to compare a company's market price to its Revenue per Share. It is a ratio widely used to value stocks and it was first used by Ken Fisher.
AT&S Austria Technologie & Systemtechnik AG's Share Price of today is €197.80. AT&S Austria Technologie & Systemtechnik AG's Revenue per Share for the trailing twelve months (TTM) ended in Mar. 2026 adds up the quarterly data reported by the company within the most recent 12 months, which was €46.16.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
It can also be calculated from the numbers for the whole company:
AT&S Austria Technologie & Systemtechnik AG (MIL:1ATS) has a PS Ratio of 4.28 as of Jun. 27, 2026. Price-to-Sales ratio is the ratio of share price to a company's revenue per share. View historical data on AT&S Austria Technologie & Systemtechnik AG and its competitors. This is 569% above median its historical median of 0.64. Over the past decade, AT&S Austria Technologie & Systemtechnik AG's PS Ratio has ranged from 0.28 to 4.90. According to the industry distribution chart, AT&S Austria Technologie & Systemtechnik AG ranks #1713 out of 2467 companies in the Hardware industry, placing it in the top 69.4%.
Is AT&S Austria Technologie & Systemtechnik AG's PS Ratio too high?
AT&S Austria Technologie & Systemtechnik AG's current PS Ratio of 4.28 is 569% above median its 10-year median of 0.64. Over the past 10 years, this metric has ranged from a low of 0.28 to a high of 4.90. The Hardware industry median PS Ratio is 1.96. AT&S Austria Technologie & Systemtechnik AG's value of 4.28 is 118.4% above this industry median. Based on the distribution chart, AT&S Austria Technologie & Systemtechnik AG ranks #1713 out of 2467 companies in the Hardware industry, which is below the industry midpoint. Overall, AT&S Austria Technologie & Systemtechnik AG has a GF Score™ of 49/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does AT&S Austria Technologie & Systemtechnik AG's PS Ratio compare to APH and GLW?
According to the Hardware industry distribution chart, AT&S Austria Technologie & Systemtechnik AG ranks #1713 out of 2467 companies for PS Ratio. This places AT&S Austria Technologie & Systemtechnik AG in the lower half of its industry. The industry median PS Ratio is 1.96. AT&S Austria Technologie & Systemtechnik AG's value of 4.28 is 118.4% above this benchmark. Historically, AT&S Austria Technologie & Systemtechnik AG's own PS Ratio has ranged from 0.28 to 4.90 over the past decade. While the company's 10-year median is 0.64 vs. the industry median of 1.96, AT&S Austria Technologie & Systemtechnik AG has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good PS Ratio for a Hardware company?
The median PS Ratio among Hardware companies is 1.96, based on 2,467 companies in the industry. Companies in the top quartile (top 25%) have a PS Ratio significantly above this median, while those in the bottom quartile fall well below. However, PS Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. AT&S Austria Technologie & Systemtechnik AG's current PS Ratio of 4.28 is 118.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high PS Ratio mean?
A high PS Ratio can signal that a stock is expensive relative to its fundamentals. Price-to-Sales ratio is the ratio of share price to a company's revenue per share. View historical data on AT&S Austria Technologie & Systemtechnik AG and its competitors. For the Hardware industry, the median PS Ratio is 1.96 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. AT&S Austria Technologie & Systemtechnik AG's current PS Ratio is 4.28, which is 569% above median its own 10-year median of 0.64. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is AT&S Austria Technologie & Systemtechnik AG stock overvalued right now?
Based on GuruFocus' analysis, AT&S Austria Technologie & Systemtechnik AG (MIL:1ATS) is currently considered Significantly Overvalued. The stock's GF Value™ is €28.20, compared to a current price of €197.80 — trading 601.4% above its estimated fair value. The current PS Ratio is 4.28, which is 569% above median its 10-year median of 0.64 and 118.4% above the Hardware industry median of 1.96. AT&S Austria Technologie & Systemtechnik AG's overall GF Score™ is 49/100 with 9 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is PS Ratio calculated?
PS Ratio is calculated from a company's financial statements. For AT&S Austria Technologie & Systemtechnik AG (MIL:1ATS), the current PS Ratio is 4.28 as of Jun. 27, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is AT&S Austria Technologie & Systemtechnik AG (MIL:1ATS) Overvalued in 2026?
Based on GuruFocus' analysis, AT&S Austria Technologie & Systemtechnik AG stock appears to be overvalued.
The current stock price of €197.80 is trading 601.4% above its estimated GF Value™ of €28.20.
GuruFocus considers AT&S Austria Technologie & Systemtechnik AG to be Significantly Overvalued.
Key valuation signals for MIL:1ATS:
PS Ratio: 4.28 (569% above median its 10-year median of 0.64)
GF Value™: €28.20 vs. price of €197.80 (601.4% above fair value)
Industry Position: 118.4% above the Hardware median (#1713 of 2467)
No single metric tells the full story. See the MIL:1ATS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
AT&S Austria Technologie & Systemtechnik AG Business Description
AT&S Austria Technologie & Systemtechnik AG provider of high-end IC substrates and printed circuit boards. The company develops and manufactures interconnection technologies for key digital industries, including mobile devices, automotive and aerospace, industrial, medical, and high-performance computing for Al applications. The products are manufactured in the European and Asian markets and are directly distributed to original equipment manufacturers (OEM) as well as to contracted electronic manufacturers (CEM). Its segments are Electronics solutions, Microelectronics, and Others. Majority of revenue comes from Microelectronics segment. It has presence in Austria, Germany, Other European countries, China, Other Asian countries, and Americas of which majority of revenue is from America.
49GF Score
Get the complete analysis for MIL:1ATS
PS Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
MIL:1ATS has been successfully added to your 
