BKK:TMD'
s Quick Ratio Range Over the Past 10 Years
Min: 3.46 Med: 7.2 Max: 12.82
Current: 8.45
During the past 13 years, Thai Metal Drum Manufacturing PCL's highest Quick Ratio was 12.82. The lowest was 3.46. And the median was 7.20.
BKK:TMD's Quick Ratio is ranked better than 94.76% of 401
companies
in the Packaging & Containers industry
Industry Median: 1.11
vs BKK:TMD: 8.45
Thai Metal Drum Manufacturing PCL (BKK:TMD) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Thai Metal Drum Manufacturing PCL Quick Ratio Related Terms
Thai Metal Drum Manufacturing PCL Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Thai Metal Drum Manufacturing PCL Quick Ratio Chart
For the Packaging & Containers subindustry, Thai Metal Drum Manufacturing PCL's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Thai Metal Drum Manufacturing PCL Quick Ratio vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Thai Metal Drum Manufacturing PCL's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Thai Metal Drum Manufacturing PCL's Quick Ratio falls into.
Thai Metal Drum Manufacturing PCL Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Thai Metal Drum Manufacturing PCL (BKK:TMD) has a Quick Ratio of 8.45 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Thai Metal Drum Manufacturing PCL and its competitors. This is 17% above median its historical median of 7.20. Over the past decade, Thai Metal Drum Manufacturing PCL's Quick Ratio has ranged from 3.46 to 12.82. According to the industry distribution chart, Thai Metal Drum Manufacturing PCL ranks #21 out of 401 companies in the Packaging & Containers industry, placing it in the top 5.2%.
Is Thai Metal Drum Manufacturing PCL's Quick Ratio too high?
Thai Metal Drum Manufacturing PCL's current Quick Ratio of 8.45 is 17% above median its 10-year median of 7.20. Over the past 10 years, this metric has ranged from a low of 3.46 to a high of 12.82. The Packaging & Containers industry median Quick Ratio is 1.11. Thai Metal Drum Manufacturing PCL's value of 8.45 is 661.3% above this industry median. Based on the distribution chart, Thai Metal Drum Manufacturing PCL ranks #21 out of 401 companies in the Packaging & Containers industry, which is in the top quartile — a strong position relative to peers. Overall, Thai Metal Drum Manufacturing PCL has a GF Score™ of 79/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Thai Metal Drum Manufacturing PCL's Quick Ratio compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Thai Metal Drum Manufacturing PCL ranks #21 out of 401 companies for Quick Ratio. This places Thai Metal Drum Manufacturing PCL in the top 5% of its industry — outperforming the majority of peers. The industry median Quick Ratio is 1.11. Thai Metal Drum Manufacturing PCL's value of 8.45 is 661.3% above this benchmark. Historically, Thai Metal Drum Manufacturing PCL's own Quick Ratio has ranged from 3.46 to 12.82 over the past decade. While the company's 10-year median is 7.20 vs. the industry median of 1.11, Thai Metal Drum Manufacturing PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Packaging & Containers company?
The median Quick Ratio among Packaging & Containers companies is 1.11, based on 401 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Thai Metal Drum Manufacturing PCL's current Quick Ratio of 8.45 is 661.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Thai Metal Drum Manufacturing PCL and its competitors. For the Packaging & Containers industry, the median Quick Ratio is 1.11 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Thai Metal Drum Manufacturing PCL's current Quick Ratio is 8.45, which is 17% above median its own 10-year median of 7.20. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Thai Metal Drum Manufacturing PCL stock overvalued right now?
Based on GuruFocus' analysis, Thai Metal Drum Manufacturing PCL (BKK:TMD) is currently considered Modestly Overvalued. The stock's GF Value™ is ฿22.92, compared to a current price of ฿26.50 — trading 15.6% above its estimated fair value. The current Quick Ratio is 8.45, which is 17% above median its 10-year median of 7.20 and 661.3% above the Packaging & Containers industry median of 1.11. Thai Metal Drum Manufacturing PCL's overall GF Score™ is 79/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Thai Metal Drum Manufacturing PCL (BKK:TMD), the current Quick Ratio is 8.45 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Thai Metal Drum Manufacturing PCL (BKK:TMD) Overvalued in 2026?
Based on GuruFocus' analysis, Thai Metal Drum Manufacturing PCL stock appears to be overvalued.
The current stock price of ฿26.50 is trading 15.6% above its estimated GF Value™ of ฿22.92.
GuruFocus considers Thai Metal Drum Manufacturing PCL to be Modestly Overvalued.
Key valuation signals for BKK:TMD:
Quick Ratio: 8.45 (17% above median its 10-year median of 7.20)
GF Value™: ฿22.92 vs. price of ฿26.50 (15.6% above fair value)
Industry Position: 661.3% above the Packaging & Containers median (#21 of 401)
No single metric tells the full story. See the BKK:TMD stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Thai Metal Drum Manufacturing PCL Business Description
Thai Metal Drum Manufacturing PCL is a Thailand-based metal drum manufacturing company. The firm is mainly engaged in the manufacturing and distribution of steel drums, plastic products, and the provision of office buildings for rent. Its products include Steel drums, tight-head drums, and open-head drums. The business operating segment includes the Production and Sales of Metal drums, the Production and Sales of Plastic Products, Rental and service income, and Others. The majority of its revenue is generated from the Production and Sales of Metal drums and geographically from Thailand.
79GF Score
Get the complete analysis for BKK:TMD
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:TMD has been successfully added to your 
