FerrotecFRRZF +64.89%66 Quick Ratio is 1.54 as of Mar. 2026, which is 15% above its 10-year median of 1.34. GuruFocus rates FRRZF with a GF Score™ of 66/100 and a GF Value™ of $24.20 (Significantly Overvalued). The stock has 12 warning signs investors should review. Among 1,028 Semiconductors companies, Ferrotec ranks worse than 57.78% on this metric.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. It is calculated as a company's Total Current Assets excludes Total Inventories divides by its Total Current Liabilities. Ferrotec's quick ratio for the quarter that ended in Mar. 2026 was 1.54.
Ferrotec has a quick ratio of 1.54. It generally indicates good short-term financial strength.
The historical rank and industry rank for Ferrotec's Quick Ratio or its related term are showing as below:
FRRZF'
s Quick Ratio Range Over the Past 10 Years
Min: 0.88 Med: 1.34 Max: 1.57
Current: 1.54
During the past 13 years, Ferrotec's highest Quick Ratio was 1.57. The lowest was 0.88. And the median was 1.34.
FRRZF's Quick Ratio is ranked worse than 57.78% of 1028
companies
in the Semiconductors industry
Industry Median: 1.85
vs FRRZF: 1.54
Ferrotec (OTCPK:FRRZF) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Ferrotec Quick Ratio Related Terms
Ferrotec Quick Ratio Historical Data
* Premium members only.
The historical data trend for Ferrotec's Quick Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Semiconductors subindustry, Ferrotec's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ferrotec Quick Ratio vs Semiconductors Industry
For the Semiconductors industry and Technology sector, Ferrotec's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Ferrotec's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
Ferrotec's Quick Ratio for the fiscal year that ended in Mar. 2026 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Ferrotec (FRRZF) has a Quick Ratio of 1.54 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Ferrotec and its competitors. This is 15% above median its historical median of 1.34. Over the past decade, Ferrotec's Quick Ratio has ranged from 0.88 to 1.57. According to the industry distribution chart, Ferrotec ranks #594 out of 1028 companies in the Semiconductors industry, placing it in the top 57.8%.
Is Ferrotec's Quick Ratio too high?
Ferrotec's current Quick Ratio of 1.54 is 15% above median its 10-year median of 1.34. Over the past 10 years, this metric has ranged from a low of 0.88 to a high of 1.57. The Semiconductors industry median Quick Ratio is 1.85. Ferrotec's value of 1.54 is 16.8% below this industry median. Based on the distribution chart, Ferrotec ranks #594 out of 1028 companies in the Semiconductors industry, which is below the industry midpoint. Overall, Ferrotec has a GF Score™ of 66/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Ferrotec's Quick Ratio compare to NVDA and AVGO?
According to the Semiconductors industry distribution chart, Ferrotec ranks #594 out of 1028 companies for Quick Ratio. This places Ferrotec in the lower half of its industry. The industry median Quick Ratio is 1.85. Ferrotec's value of 1.54 is 16.8% below this benchmark. Historically, Ferrotec's own Quick Ratio has ranged from 0.88 to 1.57 over the past decade. While the company's 10-year median is 1.34 vs. the industry median of 1.85, Ferrotec has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Semiconductors company?
The median Quick Ratio among Semiconductors companies is 1.85, based on 1,028 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ferrotec's current Quick Ratio of 1.54 is 16.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Ferrotec and its competitors. For the Semiconductors industry, the median Quick Ratio is 1.85 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ferrotec's current Quick Ratio is 1.54, which is 15% above median its own 10-year median of 1.34. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ferrotec stock overvalued right now?
Based on GuruFocus' analysis, Ferrotec (FRRZF) is currently considered Significantly Overvalued. The stock's GF Value™ is $24.20, compared to a current price of $63.73 — trading 163.3% above its estimated fair value. The current Quick Ratio is 1.54, which is 15% above median its 10-year median of 1.34 and 16.8% below the Semiconductors industry median of 1.85. Ferrotec's overall GF Score™ is 66/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Ferrotec (FRRZF), the current Quick Ratio is 1.54 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ferrotec (FRRZF) Overvalued in 2026?
Based on GuruFocus' analysis, Ferrotec stock appears to be overvalued.
The current stock price of $63.73 is trading 163.3% above its estimated GF Value™ of $24.20.
GuruFocus considers Ferrotec to be Significantly Overvalued.
Key valuation signals for FRRZF:
Quick Ratio: 1.54 (15% above median its 10-year median of 1.34)
GF Value™: $24.20 vs. price of $63.73 (163.3% above fair value)
Industry Position: 16.8% below the Semiconductors median (#594 of 1028)
No single metric tells the full story. See the FRRZF stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ferrotec Corp is a manufacturer of semiconductor equipment related products. The company operates through four business segments. Its Electronic device segment manufactures thermo-electric modules, ferrofluid, and power semiconductor substrate. The Equipment-related segment is engaged in the production and sale of vacuum seal, quartz products, ceramics and silicon products, silicon parts, and wafer products. Its Photovoltaic segment is involved in the formation of silicon crystal equipment, quartz crucible, and silicon for the solar cell. The company's Other segment comprises of laundry and other related industrial equipment.
66GF Score
Get the complete analysis for FRRZF
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRRZF has been successfully added to your 
