Roundtop Machinery Industries Co has a quick ratio of 6.81. It generally indicates good short-term financial strength.
The historical rank and industry rank for Roundtop Machinery Industries Co's Quick Ratio or its related term are showing as below:
TPE:1540'
s Quick Ratio Range Over the Past 10 Years
Min: 2.79 Med: 4.48 Max: 6.81
Current: 6.81
During the past 13 years, Roundtop Machinery Industries Co's highest Quick Ratio was 6.81. The lowest was 2.79. And the median was 4.48.
TPE:1540's Quick Ratio is ranked better than 95.41% of 3069
companies
in the Industrial Products industry
Industry Median: 1.39
vs TPE:1540: 6.81
Roundtop Machinery Industries Co (TPE:1540) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Roundtop Machinery Industries Co Quick Ratio Related Terms
Roundtop Machinery Industries Co Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Roundtop Machinery Industries Co Quick Ratio Chart
For the Specialty Industrial Machinery subindustry, Roundtop Machinery Industries Co's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Roundtop Machinery Industries Co Quick Ratio vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Roundtop Machinery Industries Co's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Roundtop Machinery Industries Co's Quick Ratio falls into.
Roundtop Machinery Industries Co Quick Ratio Calculation
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Roundtop Machinery Industries Co (TPE:1540) has a Quick Ratio of 6.81 as of Dec. 2025. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Roundtop Machinery Industries Co and its competitors. This is 52% above median its historical median of 4.48. Over the past decade, Roundtop Machinery Industries Co's Quick Ratio has ranged from 2.79 to 6.81. According to the industry distribution chart, Roundtop Machinery Industries Co ranks #141 out of 3069 companies in the Industrial Products industry, placing it in the top 4.6%.
Is Roundtop Machinery Industries Co's Quick Ratio too high?
Roundtop Machinery Industries Co's current Quick Ratio of 6.81 is 52% above median its 10-year median of 4.48. Over the past 10 years, this metric has ranged from a low of 2.79 to a high of 6.81. The Industrial Products industry median Quick Ratio is 1.39. Roundtop Machinery Industries Co's value of 6.81 is 389.9% above this industry median. Based on the distribution chart, Roundtop Machinery Industries Co ranks #141 out of 3069 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Roundtop Machinery Industries Co has a GF Score™ of 85/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Roundtop Machinery Industries Co's Quick Ratio compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Roundtop Machinery Industries Co ranks #141 out of 3069 companies for Quick Ratio. This places Roundtop Machinery Industries Co in the top 5% of its industry — outperforming the majority of peers. The industry median Quick Ratio is 1.39. Roundtop Machinery Industries Co's value of 6.81 is 389.9% above this benchmark. Historically, Roundtop Machinery Industries Co's own Quick Ratio has ranged from 2.79 to 6.81 over the past decade. While the company's 10-year median is 4.48 vs. the industry median of 1.39, Roundtop Machinery Industries Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for an Industrial Products company?
The median Quick Ratio among Industrial Products companies is 1.39, based on 3,069 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Roundtop Machinery Industries Co's current Quick Ratio of 6.81 is 389.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Roundtop Machinery Industries Co and its competitors. For the Industrial Products industry, the median Quick Ratio is 1.39 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Roundtop Machinery Industries Co's current Quick Ratio is 6.81, which is 52% above median its own 10-year median of 4.48. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Roundtop Machinery Industries Co stock overvalued right now?
Based on GuruFocus' analysis, Roundtop Machinery Industries Co (TPE:1540) is currently considered Fairly Valued. The stock's GF Value™ is NT$23.99, compared to a current price of NT$22.60 — trading 5.8% below its estimated fair value. The current Quick Ratio is 6.81, which is 52% above median its 10-year median of 4.48 and 389.9% above the Industrial Products industry median of 1.39. Roundtop Machinery Industries Co's overall GF Score™ is 85/100 with 2 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Roundtop Machinery Industries Co (TPE:1540), the current Quick Ratio is 6.81 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Roundtop Machinery Industries Co (TPE:1540) Overvalued in 2026?
Based on GuruFocus' analysis, Roundtop Machinery Industries Co stock appears to be undervalued.
The current stock price of NT$22.60 is trading 5.8% below its estimated GF Value™ of NT$23.99.
GuruFocus considers Roundtop Machinery Industries Co to be Fairly Valued.
Key valuation signals for TPE:1540:
Quick Ratio: 6.81 (52% above median its 10-year median of 4.48)
GF Value™: NT$23.99 vs. price of NT$22.60 (5.8% below fair value)
Industry Position: 389.9% above the Industrial Products median (#141 of 3069)
No single metric tells the full story. See the TPE:1540 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Roundtop Machinery Industries Co Business Description
Roundtop Machinery Industries Co Ltd is mainly engaged in the manufacturing and selling of machine tools, including milling machines, CNC milling machines, lathes, CNC lathes, various cutting centers, plastic machines, and spare parts. Geographically, the company generates the majority of its revenue from Asia and the rest from the Americas, Europe, and other regions.
85GF Score
Get the complete analysis for TPE:1540
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1540 has been successfully added to your 
