Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Roundtop Machinery Industries CoTPE:1540 +3.19%85 5-Year Yield-on-Cost % is 11.52 as of Aug. 02, 2026, which is 3% above its 10-year median of 11.15. GuruFocus rates TPE:1540 with a GF Score™ of 85/100 and a GF Value™ of NT$21.89 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 1,915 Industrial Products companies, Roundtop Machinery Industries Co ranks better than 92.53% on this metric.
The historical rank and industry rank for Roundtop Machinery Industries Co's 5-Year Yield-on-Cost % or its related term are showing as below:
TPE:1540'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 2.73 Med: 11.15 Max: 23.27
Current: 11.52
During the past 13 years, Roundtop Machinery Industries Co's highest Yield on Cost was 23.27. The lowest was 2.73. And the median was 11.15.
TPE:1540's 5-Year Yield-on-Cost % is ranked better than 92.53% of 1915
companies
in the Industrial Products industry
Industry Median: 2
vs TPE:1540: 11.52
Roundtop Machinery Industries Co (TPE:1540) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Roundtop Machinery Industries Co 5-Year Yield-on-Cost % Related Terms
TPE:1540 vs GEV, ETN, PH: 5-Year Yield-on-Cost % Comparison
For the Specialty Industrial Machinery subindustry, Roundtop Machinery Industries Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Roundtop Machinery Industries Co 5-Year Yield-on-Cost % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Roundtop Machinery Industries Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Roundtop Machinery Industries Co's 5-Year Yield-on-Cost % falls into.
Roundtop Machinery Industries Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Roundtop Machinery Industries Co (TPE:1540) has a 5-Year Yield-on-Cost % of 11.52 as of Aug. 02, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Roundtop Machinery Industries Co and its competitors. This is near median its historical median of 11.15. Over the past decade, Roundtop Machinery Industries Co's 5-Year Yield-on-Cost % has ranged from 2.73 to 23.27. According to the industry distribution chart, Roundtop Machinery Industries Co ranks #143 out of 1915 companies in the Industrial Products industry, placing it in the top 7.5%.
Is Roundtop Machinery Industries Co's 5-Year Yield-on-Cost % too high?
Roundtop Machinery Industries Co's current 5-Year Yield-on-Cost % of 11.52 is near median its 10-year median of 11.15. Over the past 10 years, this metric has ranged from a low of 2.73 to a high of 23.27. The Industrial Products industry median 5-Year Yield-on-Cost % is 2.00. Roundtop Machinery Industries Co's value of 11.52 is 476% above this industry median. Based on the distribution chart, Roundtop Machinery Industries Co ranks #143 out of 1915 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Roundtop Machinery Industries Co has a GF Score™ of 85/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Roundtop Machinery Industries Co's 5-Year Yield-on-Cost % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Roundtop Machinery Industries Co ranks #143 out of 1915 companies for 5-Year Yield-on-Cost %. This places Roundtop Machinery Industries Co in the top 8% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 2.00. Roundtop Machinery Industries Co's value of 11.52 is 476% above this benchmark. Historically, Roundtop Machinery Industries Co's own 5-Year Yield-on-Cost % has ranged from 2.73 to 23.27 over the past decade. While the company's 10-year median is 11.15 vs. the industry median of 2.00, Roundtop Machinery Industries Co has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for an Industrial Products company?
The median 5-Year Yield-on-Cost % among Industrial Products companies is 2.00, based on 1,915 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Roundtop Machinery Industries Co's current 5-Year Yield-on-Cost % of 11.52 is 476% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Roundtop Machinery Industries Co and its competitors. For the Industrial Products industry, the median 5-Year Yield-on-Cost % is 2.00 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Roundtop Machinery Industries Co's current 5-Year Yield-on-Cost % is 11.52, which is near median its own 10-year median of 11.15. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Roundtop Machinery Industries Co stock overvalued right now?
Based on GuruFocus' analysis, Roundtop Machinery Industries Co (TPE:1540) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$21.89, compared to a current price of NT$19.40 — trading 11.4% below its estimated fair value. The current 5-Year Yield-on-Cost % is 11.52, which is near median its 10-year median of 11.15 and 476% above the Industrial Products industry median of 2.00. Roundtop Machinery Industries Co's overall GF Score™ is 85/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Roundtop Machinery Industries Co (TPE:1540), the current 5-Year Yield-on-Cost % is 11.52 as of Aug. 02, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Roundtop Machinery Industries Co (TPE:1540) Overvalued in 2026?
Based on GuruFocus' analysis, Roundtop Machinery Industries Co stock appears to be undervalued.
The current stock price of NT$19.40 is trading 11.4% below its estimated GF Value™ of NT$21.89.
GuruFocus considers Roundtop Machinery Industries Co to be Modestly Undervalued.
Key valuation signals for TPE:1540:
5-Year Yield-on-Cost %: 11.52 (near median its 10-year median of 11.15)
GF Value™: NT$21.89 vs. price of NT$19.40 (11.4% below fair value)
Industry Position: 476% above the Industrial Products median (#143 of 1915)
No single metric tells the full story. See the TPE:1540 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Roundtop Machinery Industries Co Ltd is mainly engaged in the manufacturing and selling of machine tools, including milling machines, CNC milling machines, lathes, CNC lathes, various cutting centers, plastic machines, and spare parts. Geographically, the company generates the majority of its revenue from Asia and the rest from the Americas, Europe, and other regions.
85GF Score
Get the complete analysis for TPE:1540
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:1540 has been successfully added to your 
