EP Manufacturing BhdXKLS:7773 -1.15%44 Quick Ratio is 0.61 as of Mar. 2026, which is 20% above its 10-year median of 0.51. GuruFocus rates XKLS:7773 with a GF Score™ of 44/100 and a GF Value™ of RM0.48 (Modestly Undervalued). The stock has 5 warning signs investors should review. Among 1,337 Vehicles & Parts companies, EP Manufacturing Bhd ranks worse than 81.53% on this metric.
EP Manufacturing Bhd has a quick ratio of 0.61. It indicates that the company cannot currently fully pay back its current liabilities.
The historical rank and industry rank for EP Manufacturing Bhd's Quick Ratio or its related term are showing as below:
XKLS:7773'
s Quick Ratio Range Over the Past 10 Years
Min: 0.34 Med: 0.51 Max: 0.81
Current: 0.61
During the past 13 years, EP Manufacturing Bhd's highest Quick Ratio was 0.81. The lowest was 0.34. And the median was 0.51.
XKLS:7773's Quick Ratio is ranked worse than 81.53% of 1337
companies
in the Vehicles & Parts industry
Industry Median: 1.06
vs XKLS:7773: 0.61
EP Manufacturing Bhd (XKLS:7773) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
EP Manufacturing Bhd Quick Ratio Related Terms
EP Manufacturing Bhd Quick Ratio Historical Data
* Premium members only.
The historical data trend for EP Manufacturing Bhd's Quick Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, EP Manufacturing Bhd's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
EP Manufacturing Bhd Quick Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, EP Manufacturing Bhd's Quick Ratio distribution charts can be found below:
* The bar in red indicates where EP Manufacturing Bhd's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
EP Manufacturing Bhd's Quick Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
EP Manufacturing Bhd (XKLS:7773) has a Quick Ratio of 0.61 as of Mar. 2026. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on EP Manufacturing Bhd and its competitors. This is 20% above median its historical median of 0.51. Over the past decade, EP Manufacturing Bhd's Quick Ratio has ranged from 0.34 to 0.81. According to the industry distribution chart, EP Manufacturing Bhd ranks #1090 out of 1337 companies in the Vehicles & Parts industry, placing it in the top 81.5%.
Is EP Manufacturing Bhd's Quick Ratio too high?
EP Manufacturing Bhd's current Quick Ratio of 0.61 is 20% above median its 10-year median of 0.51. Over the past 10 years, this metric has ranged from a low of 0.34 to a high of 0.81. The Vehicles & Parts industry median Quick Ratio is 1.06. EP Manufacturing Bhd's value of 0.61 is 42.5% below this industry median. Based on the distribution chart, EP Manufacturing Bhd ranks #1090 out of 1337 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, EP Manufacturing Bhd has a GF Score™ of 44/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does EP Manufacturing Bhd's Quick Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, EP Manufacturing Bhd ranks #1090 out of 1337 companies for Quick Ratio. This places EP Manufacturing Bhd in the lower half of its industry. The industry median Quick Ratio is 1.06. EP Manufacturing Bhd's value of 0.61 is 42.5% below this benchmark. Historically, EP Manufacturing Bhd's own Quick Ratio has ranged from 0.34 to 0.81 over the past decade. While the company's 10-year median is 0.51 vs. the industry median of 1.06, EP Manufacturing Bhd has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Vehicles & Parts company?
The median Quick Ratio among Vehicles & Parts companies is 1.06, based on 1,337 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. EP Manufacturing Bhd's current Quick Ratio of 0.61 is 42.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on EP Manufacturing Bhd and its competitors. For the Vehicles & Parts industry, the median Quick Ratio is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. EP Manufacturing Bhd's current Quick Ratio is 0.61, which is 20% above median its own 10-year median of 0.51. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is EP Manufacturing Bhd stock overvalued right now?
Based on GuruFocus' analysis, EP Manufacturing Bhd (XKLS:7773) is currently considered Modestly Undervalued. The stock's GF Value™ is RM0.48, compared to a current price of RM0.43 — trading 10.4% below its estimated fair value. The current Quick Ratio is 0.61, which is 20% above median its 10-year median of 0.51 and 42.5% below the Vehicles & Parts industry median of 1.06. EP Manufacturing Bhd's overall GF Score™ is 44/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For EP Manufacturing Bhd (XKLS:7773), the current Quick Ratio is 0.61 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is EP Manufacturing Bhd (XKLS:7773) Overvalued in 2026?
Based on GuruFocus' analysis, EP Manufacturing Bhd stock appears to be undervalued.
The current stock price of RM0.43 is trading 10.4% below its estimated GF Value™ of RM0.48.
GuruFocus considers EP Manufacturing Bhd to be Modestly Undervalued.
Key valuation signals for XKLS:7773:
Quick Ratio: 0.61 (20% above median its 10-year median of 0.51)
GF Value™: RM0.48 vs. price of RM0.43 (10.4% below fair value)
Industry Position: 42.5% below the Vehicles & Parts median (#1090 of 1337)
No single metric tells the full story. See the XKLS:7773 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
EP Manufacturing Bhd is an investment holding company. The company, along with its subsidiaries, operates in the Automotive sector. It includes the manufacturing of metal-based and plastic-based automotive components and the distribution of automotive parts. It supplies its products mainly to Honda, Perodua, Proton, KIA, Mazda, Proton, and Toyota. Its products include Inner Body Panels and Assemblies, Intake Air Fuel Modules, Chassis Assemblies, Fuel Rail Assemblies, Corner Modules, Automotive Accessories, Rear Axle Modules, Fuel Tank Modules, and other related products. It has operations in Malaysia and Saudi Arabia, with the majority of the revenue generated from Malaysia.
44GF Score
Get the complete analysis for XKLS:7773
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XKLS:7773 has been successfully added to your 
