Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Unimech Group BhdXKLS:7091 85 Receivables Turnover is 0.77 as of Mar. 2026. GuruFocus rates XKLS:7091 with a GF Score™ of 85/100 and a GF Value™ of RM1.53 (Fairly Valued). The stock has 1 warning sign investors should review. Among 3,028 Industrial Products companies, Unimech Group Bhd ranks worse than 70.97% on this metric.
The Receivables Turnover ratio measures the number of times a company collects its average accounts receivable balance. It is calculated as Revenue divided by average Accounts Receivable. An efficient company has a higher accounts receivable turnover ratio while an inefficient company has a lower ratio. Unimech Group Bhd's Revenue for the
three
months ended in Mar. 2026 was RM74.1 Mil. Unimech Group Bhd's average Accounts Receivable for the
three
months ended in Mar. 2026 was RM96.5 Mil.
Hence, Unimech Group Bhd's Receivables Turnover for the
three
months ended in Mar. 2026 was 0.77.
Unimech Group Bhd (XKLS:7091) Receivables Turnover Explanation
An efficient company has a higher accounts receivable turnover ratio while an inefficient company has a lower ratio. This metric is commonly used to compare companies within the same industry to check whether they are on par with their competitors.
Unimech Group Bhd Receivables Turnover Related Terms
Unimech Group Bhd Receivables Turnover Historical Data
* Premium members only.
The historical data trend for Unimech Group Bhd's Receivables Turnover can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
XKLS:7091 vs CRS, ATI, MLI: Receivables Turnover Comparison
For the Metal Fabrication subindustry, Unimech Group Bhd's Receivables Turnover, along with its competitors' market caps and Receivables Turnover data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Unimech Group Bhd Receivables Turnover vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Unimech Group Bhd's Receivables Turnover distribution charts can be found below:
* The bar in red indicates where Unimech Group Bhd's Receivables Turnover falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Unimech Group Bhd (XKLS:7091) has a Receivables Turnover of 0.77 as of Mar. 2026. The accounts receivables turnover ratio measures the number of times a company collects its average accounts receivable balance. It is calculated as Revenue divided by Average Accounts Receivable. View historical data on Unimech Group Bhd and its competitors. According to the industry distribution chart, Unimech Group Bhd ranks #2149 out of 3028 companies in the Industrial Products industry, placing it in the top 71%.
Is Unimech Group Bhd's Receivables Turnover too high?
Unimech Group Bhd's current Receivables Turnover is 0.77. The Industrial Products industry median Receivables Turnover is 4.45. Unimech Group Bhd's value of 0.77 is 82.7% below this industry median. Based on the distribution chart, Unimech Group Bhd ranks #2149 out of 3028 companies in the Industrial Products industry, which is below the industry midpoint. Overall, Unimech Group Bhd has a GF Score™ of 85/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Unimech Group Bhd's Receivables Turnover compare to CRS and ATI?
According to the Industrial Products industry distribution chart, Unimech Group Bhd ranks #2149 out of 3028 companies for Receivables Turnover. This places Unimech Group Bhd in the lower half of its industry. The industry median Receivables Turnover is 4.45. Unimech Group Bhd's value of 0.77 is 82.7% below this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Receivables Turnover for an Industrial Products company?
The median Receivables Turnover among Industrial Products companies is 4.45, based on 3,028 companies in the industry. Companies in the top quartile (top 25%) have a Receivables Turnover significantly above this median, while those in the bottom quartile fall well below. However, Receivables Turnover should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Unimech Group Bhd's current Receivables Turnover of 0.77 is 82.7% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Receivables Turnover mean?
A high Receivables Turnover can signal that a stock is expensive relative to its fundamentals. The accounts receivables turnover ratio measures the number of times a company collects its average accounts receivable balance. It is calculated as Revenue divided by Average Accounts Receivable. View historical data on Unimech Group Bhd and its competitors. For the Industrial Products industry, the median Receivables Turnover is 4.45 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Unimech Group Bhd's current Receivables Turnover is 0.77. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Unimech Group Bhd stock overvalued right now?
Based on GuruFocus' analysis, Unimech Group Bhd (XKLS:7091) is currently considered Fairly Valued. The stock's GF Value™ is RM1.53, compared to a current price of RM1.39 — trading 9.2% below its estimated fair value. The current Receivables Turnover is 0.77 and 82.7% below the Industrial Products industry median of 4.45. Unimech Group Bhd's overall GF Score™ is 85/100 with 1 warning sign to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Receivables Turnover calculated?
Receivables Turnover is calculated from a company's financial statements. For Unimech Group Bhd (XKLS:7091), the current Receivables Turnover is 0.77 as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Unimech Group Bhd (XKLS:7091) Overvalued in 2026?
Based on GuruFocus' analysis, Unimech Group Bhd stock appears to be undervalued.
The current stock price of RM1.39 is trading 9.2% below its estimated GF Value™ of RM1.53.
GuruFocus considers Unimech Group Bhd to be Fairly Valued.
Key valuation signals for XKLS:7091:
Receivables Turnover: 0.77
GF Value™: RM1.53 vs. price of RM1.39 (9.2% below fair value)
Industry Position: 82.7% below the Industrial Products median (#2149 of 3028)
No single metric tells the full story. See the XKLS:7091 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Unimech Group Bhd is a Malaysia-based company involved in the metal fabrication business. The business segment of the company includes Valves, Instrumentation, and Fittings; Electronic; and Pumps. It derives a majority of the revenue from the Valves, instrumentation, and fittings segment, which involves system design, fabrication, manufacturing, and distribution of all kinds of valves, instrumentation, and fittings, maintenance of boilers, and combustion. Its Electronic segment is engaged in manufacture of electronic products and other related products, while its Pump segment is engaged in design, fabrication, assembly, distribution of all kinds of pumps and provision of related services, and other segments include spraying, coating, silk screening in metal, plastic, chemicals, and others.
85GF Score
Get the complete analysis for XKLS:7091
Receivables Turnover is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
XKLS:7091 has been successfully added to your 
