1-Year Return on Invested Incremental Capital (1-Year ROIIC %) measures the change in earnings as a percentage of change in investment over 1-year.
Danieli & C. Officine Meccaniche SpA's 1-Year ROIIC % for the quarter that ended in Dec. 2025 was 10.06%. High ROIIC is generally an indication that your business is capital efficient or has a higher operating leverage.
Return on Incremental Invested Capital (ROIIC) is an extension of Return on Investment Capital (ROIC). ROIC % tells investors how efficiently that profitability is earned per dollar of company capital. ROIIC narrows the focus even further and shows how profitable each additional unit of capital investment could be. ROIIC % is a more powerful metric than ROIC because it measures how much money the company can generate going forward on future capital investments.
High ROIIC is generally an indication that your business is capital efficient or has a higher operating leverage.
Be Aware
It's important to keep in mind that when tracking ROIIC, the metric is better suited to forecasting the trend of future returns rather than measuring current return on investment.
Danieli & C. Officine Meccaniche SpA 1-Year ROIIC % Related Terms
Danieli & C. Officine Meccaniche SpA 1-Year ROIIC % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA 1-Year ROIIC % Chart
FRA:DAS0 vs GEV, ETN, PH: 1-Year ROIIC % Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's 1-Year ROIIC %, along with its competitors' market caps and 1-Year ROIIC % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA 1-Year ROIIC % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's 1-Year ROIIC % distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's 1-Year ROIIC % falls into.
1-Year Incremental Net Operating Profit After Taxes (NOPAT)**
/
1-Year Incremental Invested Capital
=
( 267.1468 (Dec. 2025) - 221.7248 (Dec. 2024) )
/
( 4669.537 (Dec. 2025) - 4217.942 (Dec. 2024) )
=
45.422
/
451.595
=
10.06%***
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
** TTM data of NOPAT and Invested Capital was used to calculate 1-Year ROIIC %.
*** Please be aware that the ROIIC (Return on Invested Capital) calculations are based on company-level data using the primary share class. The calculated data provided is for demonstration purposes and may slightly differ from the results displayed in the title due to potential variations caused by currency exchange rate differences throughout the year.
Danieli & C. Officine Meccaniche SpA (FRA:DAS0) has a 1-Year ROIIC % of 10.06 as of Dec. 2025. 1-Year ROIIC % measures the change in earnings as a percentage of change in investment over 1-year. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1223 out of 2959 companies in the Industrial Products industry, placing it in the top 41.3%.
Is Danieli & C. Officine Meccaniche SpA's 1-Year ROIIC % too high?
Danieli & C. Officine Meccaniche SpA's current 1-Year ROIIC % is 10.06. The Industrial Products industry median 1-Year ROIIC % is 3.75. Danieli & C. Officine Meccaniche SpA's value of 10.06 is 168.3% above this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1223 out of 2959 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 67/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's 1-Year ROIIC % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #1223 out of 2959 companies for 1-Year ROIIC %. This puts Danieli & C. Officine Meccaniche SpA in the upper half of its industry. The industry median 1-Year ROIIC % is 3.75. Danieli & C. Officine Meccaniche SpA's value of 10.06 is 168.3% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 1-Year ROIIC % for an Industrial Products company?
The median 1-Year ROIIC % among Industrial Products companies is 3.75, based on 2,959 companies in the industry. Companies in the top quartile (top 25%) have a 1-Year ROIIC % significantly above this median, while those in the bottom quartile fall well below. However, 1-Year ROIIC % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current 1-Year ROIIC % of 10.06 is 168.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 1-Year ROIIC % mean?
A high 1-Year ROIIC % can signal that a stock is expensive relative to its fundamentals. 1-Year ROIIC % measures the change in earnings as a percentage of change in investment over 1-year. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median 1-Year ROIIC % is 3.75 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current 1-Year ROIIC % is 10.06. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (FRA:DAS0) is currently considered Significantly Overvalued. The stock's GF Value™ is €22.49, compared to a current price of €49.70 — trading 121% above its estimated fair value. The current 1-Year ROIIC % is 10.06 and 168.3% above the Industrial Products industry median of 3.75. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 67/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 1-Year ROIIC % calculated?
1-Year ROIIC % is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (FRA:DAS0), the current 1-Year ROIIC % is 10.06 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (FRA:DAS0) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €49.70 is trading 121% above its estimated GF Value™ of €22.49.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for FRA:DAS0:
1-Year ROIIC %: 10.06
GF Value™: €22.49 vs. price of €49.70 (121% above fair value)
Industry Position: 168.3% above the Industrial Products median (#1223 of 2959)
No single metric tells the full story. See the FRA:DAS0 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA Business Description
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
67GF Score
Get the complete analysis for FRA:DAS0
1-Year ROIIC % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAS0 has been successfully added to your 
