Return on Retained Earnings (RORE) is an indicator of a company's growth potential, it shows how much a company earns by reinvesting its retained earnings, i.e. profits after dividend payments.
Danieli & C. Officine Meccaniche SpA's 10-Year RORE % for the quarter that ended in Dec. 2025 was 10.67%.
Return on Retained Earnings (RORE) is important to investors because it reveals a company's efficiency and growth potential. A higher RORE indicates a higher return. A high RORE indicates that the company should reinvest profits into the business. A lower RORE suggests that the company should distribute profits to shareholders by paying out dividends, since those dollars aren't generating much additional growth for the company.
There are a several different ways to arrive at the Return on Retained Earnings. The simplest way to calculate it is by using published information on Earnings per Share (EPS) and Dividend per Share (DPS) over a selected period. Here, 10-year period is chosen.
Be Aware
Please keep in mind that the RORE is relative to the nature of the business and its competitors. If another company in the same sector is producing a lower return on retained earnings, it doesn’t necessarily mean it’s a bad investment. It may just suggest the company is older and no longer in a high growth stage. At such a stage in the business cycle, it would be expected to see a lower RORE and higher dividend payout.
Danieli & C. Officine Meccaniche SpA 10-Year RORE % Related Terms
Danieli & C. Officine Meccaniche SpA 10-Year RORE % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Danieli & C. Officine Meccaniche SpA 10-Year RORE % Chart
FRA:DAS0 vs GEV, ETN, PH: 10-Year RORE % Comparison
For the Specialty Industrial Machinery subindustry, Danieli & C. Officine Meccaniche SpA's 10-Year RORE %, along with its competitors' market caps and 10-Year RORE % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Danieli & C. Officine Meccaniche SpA 10-Year RORE % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Danieli & C. Officine Meccaniche SpA's 10-Year RORE % distribution charts can be found below:
* The bar in red indicates where Danieli & C. Officine Meccaniche SpA's 10-Year RORE % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of 10-Year RORE %, the most recent and first period EPS (Diluted) is the trailing twelve months (TTM) data ended in Dec. 2025 and 10-year before.
Danieli & C. Officine Meccaniche SpA (FRA:DAS0) has a 10-Year RORE % of 10.67 as of Dec. 2025. 10-Year RORE % shows how much a company earns by reinvesting its retained earnings in 10-year. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. According to the industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #792 out of 1898 companies in the Industrial Products industry, placing it in the top 41.7%.
Is Danieli & C. Officine Meccaniche SpA's 10-Year RORE % too high?
Danieli & C. Officine Meccaniche SpA's current 10-Year RORE % is 10.67. The Industrial Products industry median 10-Year RORE % is 7.97. Danieli & C. Officine Meccaniche SpA's value of 10.67 is 33.9% above this industry median. Based on the distribution chart, Danieli & C. Officine Meccaniche SpA ranks #792 out of 1898 companies in the Industrial Products industry, which is above the industry midpoint. Overall, Danieli & C. Officine Meccaniche SpA has a GF Score™ of 67/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Danieli & C. Officine Meccaniche SpA's 10-Year RORE % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Danieli & C. Officine Meccaniche SpA ranks #792 out of 1898 companies for 10-Year RORE %. This puts Danieli & C. Officine Meccaniche SpA in the upper half of its industry. The industry median 10-Year RORE % is 7.97. Danieli & C. Officine Meccaniche SpA's value of 10.67 is 33.9% above this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 10-Year RORE % for an Industrial Products company?
The median 10-Year RORE % among Industrial Products companies is 7.97, based on 1,898 companies in the industry. Companies in the top quartile (top 25%) have a 10-Year RORE % significantly above this median, while those in the bottom quartile fall well below. However, 10-Year RORE % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Danieli & C. Officine Meccaniche SpA's current 10-Year RORE % of 10.67 is 33.9% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 10-Year RORE % mean?
A high 10-Year RORE % can signal that a stock is expensive relative to its fundamentals. 10-Year RORE % shows how much a company earns by reinvesting its retained earnings in 10-year. View historical data on Danieli & C. Officine Meccaniche SpA and its competitors. For the Industrial Products industry, the median 10-Year RORE % is 7.97 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Danieli & C. Officine Meccaniche SpA's current 10-Year RORE % is 10.67. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Danieli & C. Officine Meccaniche SpA stock overvalued right now?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA (FRA:DAS0) is currently considered Significantly Overvalued. The stock's GF Value™ is €22.49, compared to a current price of €49.70 — trading 121% above its estimated fair value. The current 10-Year RORE % is 10.67 and 33.9% above the Industrial Products industry median of 7.97. Danieli & C. Officine Meccaniche SpA's overall GF Score™ is 67/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 10-Year RORE % calculated?
10-Year RORE % is calculated from a company's financial statements. For Danieli & C. Officine Meccaniche SpA (FRA:DAS0), the current 10-Year RORE % is 10.67 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Danieli & C. Officine Meccaniche SpA (FRA:DAS0) Overvalued in 2026?
Based on GuruFocus' analysis, Danieli & C. Officine Meccaniche SpA stock appears to be overvalued.
The current stock price of €49.70 is trading 121% above its estimated GF Value™ of €22.49.
GuruFocus considers Danieli & C. Officine Meccaniche SpA to be Significantly Overvalued.
Key valuation signals for FRA:DAS0:
10-Year RORE %: 10.67
GF Value™: €22.49 vs. price of €49.70 (121% above fair value)
Industry Position: 33.9% above the Industrial Products median (#792 of 1898)
No single metric tells the full story. See the FRA:DAS0 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Danieli & C. Officine Meccaniche SpA Business Description
Danieli & C. Officine Meccaniche SpA is an Italy-based company that is engaged in manufacturing and distribution of steel and other nonferrous metal products as well as plant building. The company operates through two segments, namely steelmaking and plant making. The Steelmaking segment manufactures ingots, forged bars, blooms, rolled bars, bar in coils and others. End customers primarily come from the mechanical, automotive, oil & gas, power generation and other sectors. The Plant Making segment designs and builds mines, pellet production plants, furnaces, rolling mills and other various plants and facilities. The company has a global presence, with Europe, Middle East and Far East being the three largest markets for the company.
67GF Score
Get the complete analysis for FRA:DAS0
10-Year RORE % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
FRA:DAS0 has been successfully added to your 
