Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Creta PlasticsATH:PLAKR -2.67%75 5-Year Yield-on-Cost % is 4.93 as of Aug. 04, 2026, which is 39% above its 10-year median of 3.54. GuruFocus rates ATH:PLAKR with a GF Score™ of 75/100 and a GF Value™ of €15.31 (Fairly Valued). The stock has 5 warning signs investors should review. Among 1,056 Chemicals companies, Creta Plastics ranks better than 77.75% on this metric.
Creta Plastics's yield on cost for the quarter that ended in Dec. 2025 was 4.93.
The historical rank and industry rank for Creta Plastics's 5-Year Yield-on-Cost % or its related term are showing as below:
ATH:PLAKR'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.77 Med: 3.54 Max: 5.14
Current: 4.93
During the past 13 years, Creta Plastics's highest Yield on Cost was 5.14. The lowest was 0.77. And the median was 3.54.
ATH:PLAKR's 5-Year Yield-on-Cost % is ranked better than 77.75% of 1056
companies
in the Chemicals industry
Industry Median: 1.87
vs ATH:PLAKR: 4.93
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Creta Plastics 5-Year Yield-on-Cost % Related Terms
ATH:PLAKR vs LIN, SHW, ECL: 5-Year Yield-on-Cost % Comparison
For the Specialty Chemicals subindustry, Creta Plastics's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Creta Plastics 5-Year Yield-on-Cost % vs Chemicals Industry
For the Chemicals industry and Basic Materials sector, Creta Plastics's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Creta Plastics's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Therefore, Yield-on-Cost of Creta Plastics is calculated as
Creta Plastics (ATH:PLAKR) has a 5-Year Yield-on-Cost % of 4.93 as of Aug. 04, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Creta Plastics and its competitors. This is 39% above median its historical median of 3.54. Over the past decade, Creta Plastics' 5-Year Yield-on-Cost % has ranged from 0.77 to 5.14. According to the industry distribution chart, Creta Plastics ranks #235 out of 1056 companies in the Chemicals industry, placing it in the top 22.3%.
Is Creta Plastics' 5-Year Yield-on-Cost % too high?
Creta Plastics' current 5-Year Yield-on-Cost % of 4.93 is 39% above median its 10-year median of 3.54. Over the past 10 years, this metric has ranged from a low of 0.77 to a high of 5.14. The Chemicals industry median 5-Year Yield-on-Cost % is 1.87. Creta Plastics' value of 4.93 is 163.6% above this industry median. Based on the distribution chart, Creta Plastics ranks #235 out of 1056 companies in the Chemicals industry, which is in the top quartile — a strong position relative to peers. Overall, Creta Plastics has a GF Score™ of 75/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Creta Plastics' 5-Year Yield-on-Cost % compare to LIN and SHW?
According to the Chemicals industry distribution chart, Creta Plastics ranks #235 out of 1056 companies for 5-Year Yield-on-Cost %. This places Creta Plastics in the top 22% of its industry — outperforming the majority of peers. The industry median 5-Year Yield-on-Cost % is 1.87. Creta Plastics' value of 4.93 is 163.6% above this benchmark. Historically, Creta Plastics' own 5-Year Yield-on-Cost % has ranged from 0.77 to 5.14 over the past decade. While the company's 10-year median is 3.54 vs. the industry median of 1.87, Creta Plastics has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Chemicals company?
The median 5-Year Yield-on-Cost % among Chemicals companies is 1.87, based on 1,056 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Creta Plastics's current 5-Year Yield-on-Cost % of 4.93 is 163.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Creta Plastics and its competitors. For the Chemicals industry, the median 5-Year Yield-on-Cost % is 1.87 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Creta Plastics's current 5-Year Yield-on-Cost % is 4.93, which is 39% above median its own 10-year median of 3.54. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Creta Plastics stock overvalued right now?
Based on GuruFocus' analysis, Creta Plastics (ATH:PLAKR) is currently considered Fairly Valued. The stock's GF Value™ is €15.31, compared to a current price of €14.60 — trading 4.6% below its estimated fair value. The current 5-Year Yield-on-Cost % is 4.93, which is 39% above median its 10-year median of 3.54 and 163.6% above the Chemicals industry median of 1.87. Creta Plastics' overall GF Score™ is 75/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Creta Plastics (ATH:PLAKR), the current 5-Year Yield-on-Cost % is 4.93 as of Aug. 04, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Creta Plastics (ATH:PLAKR) Overvalued in 2026?
Based on GuruFocus' analysis, Creta Plastics stock appears to be undervalued.
The current stock price of €14.60 is trading 4.6% below its estimated GF Value™ of €15.31.
GuruFocus considers Creta Plastics to be Fairly Valued.
Key valuation signals for ATH:PLAKR:
5-Year Yield-on-Cost %: 4.93 (39% above median its 10-year median of 3.54)
GF Value™: €15.31 vs. price of €14.60 (4.6% below fair value)
Industry Position: 163.6% above the Chemicals median (#235 of 1056)
No single metric tells the full story. See the ATH:PLAKR stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Creta Plastics SA is a European producer of masterbatches and agricultural films. The company is serving with its products the plastics industry, the horticultural & agricultural markets as well as projects related to water-management & environment protection. The company specializes in the production of Kritilen, Kritifil, Kritiflex, Kritisol, Kritisan And Kritires.
75GF Score
Get the complete analysis for ATH:PLAKR
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ATH:PLAKR has been successfully added to your 
