Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Panjawattana Plastic PCLBKK:PJW +1.98%79 5-Year Yield-on-Cost % is 5.03 as of Aug. 23, 2026, which is 23% above its 10-year median of 4.08. GuruFocus rates BKK:PJW with a GF Score™ of 79/100 and a GF Value™ of ฿2.61 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 241 Packaging & Containers companies, Panjawattana Plastic PCL ranks better than 70.12% on this metric.
The historical rank and industry rank for Panjawattana Plastic PCL's 5-Year Yield-on-Cost % or its related term are showing as below:
BKK:PJW'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 1.19 Med: 4.08 Max: 7.82
Current: 5.03
During the past 13 years, Panjawattana Plastic PCL's highest Yield on Cost was 7.82. The lowest was 1.19. And the median was 4.08.
BKK:PJW's 5-Year Yield-on-Cost % is ranked better than 70.12% of 241
companies
in the Packaging & Containers industry
Industry Median: 3.06
vs BKK:PJW: 5.03
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Panjawattana Plastic PCL 5-Year Yield-on-Cost % Related Terms
BKK:PJW vs SW, PKG, IP: 5-Year Yield-on-Cost % Comparison
For the Packaging & Containers subindustry, Panjawattana Plastic PCL's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Panjawattana Plastic PCL 5-Year Yield-on-Cost % vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Panjawattana Plastic PCL's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Panjawattana Plastic PCL's 5-Year Yield-on-Cost % falls into.
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Panjawattana Plastic PCL (BKK:PJW) has a 5-Year Yield-on-Cost % of 5.03 as of Aug. 23, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Panjawattana Plastic PCL and its competitors. This is 23% above median its historical median of 4.08. Over the past decade, Panjawattana Plastic PCL's 5-Year Yield-on-Cost % has ranged from 1.19 to 7.82. According to the industry distribution chart, Panjawattana Plastic PCL ranks #72 out of 241 companies in the Packaging & Containers industry, placing it in the top 29.9%.
Is Panjawattana Plastic PCL's 5-Year Yield-on-Cost % too high?
Panjawattana Plastic PCL's current 5-Year Yield-on-Cost % of 5.03 is 23% above median its 10-year median of 4.08. Over the past 10 years, this metric has ranged from a low of 1.19 to a high of 7.82. The Packaging & Containers industry median 5-Year Yield-on-Cost % is 3.06. Panjawattana Plastic PCL's value of 5.03 is 64.4% above this industry median. Based on the distribution chart, Panjawattana Plastic PCL ranks #72 out of 241 companies in the Packaging & Containers industry, which is above the industry midpoint. Overall, Panjawattana Plastic PCL has a GF Score™ of 79/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Panjawattana Plastic PCL's 5-Year Yield-on-Cost % compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Panjawattana Plastic PCL ranks #72 out of 241 companies for 5-Year Yield-on-Cost %. This puts Panjawattana Plastic PCL in the upper half of its industry. The industry median 5-Year Yield-on-Cost % is 3.06. Panjawattana Plastic PCL's value of 5.03 is 64.4% above this benchmark. Historically, Panjawattana Plastic PCL's own 5-Year Yield-on-Cost % has ranged from 1.19 to 7.82 over the past decade. While the company's 10-year median is 4.08 vs. the industry median of 3.06, Panjawattana Plastic PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Packaging & Containers company?
The median 5-Year Yield-on-Cost % among Packaging & Containers companies is 3.06, based on 241 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Panjawattana Plastic PCL's current 5-Year Yield-on-Cost % of 5.03 is 64.4% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Panjawattana Plastic PCL and its competitors. For the Packaging & Containers industry, the median 5-Year Yield-on-Cost % is 3.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Panjawattana Plastic PCL's current 5-Year Yield-on-Cost % is 5.03, which is 23% above median its own 10-year median of 4.08. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Panjawattana Plastic PCL stock overvalued right now?
Based on GuruFocus' analysis, Panjawattana Plastic PCL (BKK:PJW) is currently considered Modestly Undervalued. The stock's GF Value™ is ฿2.61, compared to a current price of ฿2.06 — trading 21.1% below its estimated fair value. The current 5-Year Yield-on-Cost % is 5.03, which is 23% above median its 10-year median of 4.08 and 64.4% above the Packaging & Containers industry median of 3.06. Panjawattana Plastic PCL's overall GF Score™ is 79/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Panjawattana Plastic PCL (BKK:PJW), the current 5-Year Yield-on-Cost % is 5.03 as of Aug. 23, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Panjawattana Plastic PCL (BKK:PJW) Overvalued in 2026?
Based on GuruFocus' analysis, Panjawattana Plastic PCL stock appears to be undervalued.
The current stock price of ฿2.06 is trading 21.1% below its estimated GF Value™ of ฿2.61.
GuruFocus considers Panjawattana Plastic PCL to be Modestly Undervalued.
Key valuation signals for BKK:PJW:
5-Year Yield-on-Cost %: 5.03 (23% above median its 10-year median of 4.08)
GF Value™: ฿2.61 vs. price of ฿2.06 (21.1% below fair value)
Industry Position: 64.4% above the Packaging & Containers median (#72 of 241)
No single metric tells the full story. See the BKK:PJW stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Panjawattana Plastic PCL is manufacturer and distributor of packaging for consumer product, Agro chemical, automotive parts and materials from plastic imitation. The company operates its business through the following segments, Samuthsakhon Plant, Chonburi Plant, Bangkok Plant, Jiangsu Plant, Tianjin Plant, Service, and the Business trading segment. It produces and supplies plastic containers and closures such as lubricant packaging, milk and yoghurt packaging, consumer goods packaging and chemicals liquid packaging, and plastic automotive parts of high quality and with custom designs according to clients' requirements for each of their specific brands.
79GF Score
Get the complete analysis for BKK:PJW
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:PJW has been successfully added to your 
