Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Panjawattana Plastic PCLBKK:PJW 78 EBITDA Margin % is 12.24% as of Mar. 2026, which is 3% below its 10-year median of 12.65. GuruFocus rates BKK:PJW with a GF Score™ of 78/100 and a GF Value™ of ฿2.95 (Modestly Undervalued). The stock has 4 warning signs investors should review. Among 394 Packaging & Containers companies, Panjawattana Plastic PCL ranks better than 69.04% on this metric.
EBITDA Margin % is the ratio of EBITDA divided by net sales or Revenue. It is an performance metric measuring company's operating profitability. EBITDA Margin takes depreciation and amortization, interest expense and tax into account, which makes it easy to compare the relative profitability of companies of different sizes in the same industry.
Panjawattana Plastic PCL EBITDA Margin % Related Terms
Panjawattana Plastic PCL EBITDA Margin % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
BKK:PJW vs SW, PKG, IP: EBITDA Margin % Comparison
For the Packaging & Containers subindustry, Panjawattana Plastic PCL's EBITDA Margin %, along with its competitors' market caps and EBITDA Margin % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Panjawattana Plastic PCL EBITDA Margin % vs Packaging & Containers Industry
For the Packaging & Containers industry and Consumer Cyclical sector, Panjawattana Plastic PCL's EBITDA Margin % distribution charts can be found below:
* The bar in red indicates where Panjawattana Plastic PCL's EBITDA Margin % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Panjawattana Plastic PCL (BKK:PJW) has a EBITDA Margin % of 12.24% as of Mar. 2026. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Panjawattana Plastic PCL and its competitors. This is near median its historical median of 12.65. Over the past decade, Panjawattana Plastic PCL's EBITDA Margin % has ranged from 6.83 to 15.27. According to the industry distribution chart, Panjawattana Plastic PCL ranks #122 out of 394 companies in the Packaging & Containers industry, placing it in the top 31%.
Is Panjawattana Plastic PCL's EBITDA Margin % too high?
Panjawattana Plastic PCL's current EBITDA Margin % of 12.24% is near median its 10-year median of 12.65. Over the past 10 years, this metric has ranged from a low of 6.83 to a high of 15.27. The Packaging & Containers industry median EBITDA Margin % is 9.62. Panjawattana Plastic PCL's value of 12.24% is 27.2% above this industry median. Based on the distribution chart, Panjawattana Plastic PCL ranks #122 out of 394 companies in the Packaging & Containers industry, which is above the industry midpoint. Overall, Panjawattana Plastic PCL has a GF Score™ of 78/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Panjawattana Plastic PCL's EBITDA Margin % compare to SW and PKG?
According to the Packaging & Containers industry distribution chart, Panjawattana Plastic PCL ranks #122 out of 394 companies for EBITDA Margin %. This puts Panjawattana Plastic PCL in the upper half of its industry. The industry median EBITDA Margin % is 9.62. Panjawattana Plastic PCL's value of 12.24% is 27.2% above this benchmark. Historically, Panjawattana Plastic PCL's own EBITDA Margin % has ranged from 6.83 to 15.27 over the past decade. While the company's 10-year median is 12.65 vs. the industry median of 9.62, Panjawattana Plastic PCL has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good EBITDA Margin % for a Packaging & Containers company?
The median EBITDA Margin % among Packaging & Containers companies is 9.62, based on 394 companies in the industry. Companies in the top quartile (top 25%) have a EBITDA Margin % significantly above this median, while those in the bottom quartile fall well below. However, EBITDA Margin % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Panjawattana Plastic PCL's current EBITDA Margin % of 12.24% is 27.2% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high EBITDA Margin % mean?
A high EBITDA Margin % can signal that a stock is expensive relative to its fundamentals. EBITDA Margin is the ratio of EBITDA divided by net sales or Revenue, usually presented in percent. View historical data on Panjawattana Plastic PCL and its competitors. For the Packaging & Containers industry, the median EBITDA Margin % is 9.62 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Panjawattana Plastic PCL's current EBITDA Margin % is 12.24%, which is near median its own 10-year median of 12.65. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Panjawattana Plastic PCL stock overvalued right now?
Based on GuruFocus' analysis, Panjawattana Plastic PCL (BKK:PJW) is currently considered Modestly Undervalued. The stock's GF Value™ is ฿2.95, compared to a current price of ฿2.10 — trading 28.8% below its estimated fair value. The current EBITDA Margin % is 12.24%, which is near median its 10-year median of 12.65 and 27.2% above the Packaging & Containers industry median of 9.62. Panjawattana Plastic PCL's overall GF Score™ is 78/100 with 4 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is EBITDA Margin % calculated?
EBITDA Margin % is calculated from a company's financial statements. For Panjawattana Plastic PCL (BKK:PJW), the current EBITDA Margin % is 12.24% as of Mar. 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Panjawattana Plastic PCL (BKK:PJW) Overvalued in 2026?
Based on GuruFocus' analysis, Panjawattana Plastic PCL stock appears to be undervalued.
The current stock price of ฿2.10 is trading 28.8% below its estimated GF Value™ of ฿2.95.
GuruFocus considers Panjawattana Plastic PCL to be Modestly Undervalued.
Key valuation signals for BKK:PJW:
EBITDA Margin %: 12.24% (near median its 10-year median of 12.65)
GF Value™: ฿2.95 vs. price of ฿2.10 (28.8% below fair value)
Industry Position: 27.2% above the Packaging & Containers median (#122 of 394)
No single metric tells the full story. See the BKK:PJW stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Panjawattana Plastic PCL is manufacturer and distributor of packaging for consumer product, Agro chemical, automotive parts and materials from plastic imitation. The company operates its business through the following segments, Samuthsakhon Plant, Chonburi Plant, Bangkok Plant, Jiangsu Plant, Tianjin Plant, Service, and the Business trading segment. It produces and supplies plastic containers and closures such as lubricant packaging, milk and yoghurt packaging, consumer goods packaging and chemicals liquid packaging, and plastic automotive parts of high quality and with custom designs according to clients' requirements for each of their specific brands.
78GF Score
Get the complete analysis for BKK:PJW
EBITDA Margin % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
BKK:PJW has been successfully added to your 
