MTUS (Metallus) 5-Year Yield-on-Cost %: 0.00 (As of Jul. 14, 2026)

Author: Vera Yuan Vera Yuan
Vera Yuan
Vera Yuan
Director of Data and Quant Analytics at GuruFocus
Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Reviewed by: Charlie Tian Charlie Tian
Charlie Tian
Charlie Tian
Founder & CEO of GuruFocus
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.

MTUS Metallus Inc MTUS
72 GF Score
Price $19.30
GF Value $19.36
Valuation Fairly Valued
! 5 Warning Signs
View Full Analysis

What is Metallus 5-Year Yield-on-Cost %?

Metallus MTUS -0.97% 72 5-Year Yield-on-Cost % is 0.00 as of Jul. 14, 2026. GuruFocus rates MTUS with a GF Score™ of 72/100 and a GF Value™ of $19.36 (Fairly Valued). The stock has 5 warning signs investors should review. Among 318 Steel companies, Metallus ranks worse than 314465.09% on this metric.

Metallus's yield on cost for the quarter that ended in Mar. 2026 was 0.00.


The historical rank and industry rank for Metallus's 5-Year Yield-on-Cost % or its related term are showing as below:


During the past 13 years, Metallus's highest Yield on Cost was 1.63. The lowest was 1.24. And the median was 1.45.


MTUS's 5-Year Yield-on-Cost % is not ranked *
in the Steel industry.
Industry Median: 3.34
* Ranked among companies with meaningful 5-Year Yield-on-Cost % only.

Metallus  (NYSE:MTUS) 5-Year Yield-on-Cost % Explanation

Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.


Metallus 5-Year Yield-on-Cost % Related Terms


MTUS vs MSB, FRD, NWPX: 5-Year Yield-on-Cost % Comparison

For the Steel subindustry, Metallus's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


Metallus 5-Year Yield-on-Cost % vs Steel Industry

For the Steel industry and Basic Materials sector, Metallus's 5-Year Yield-on-Cost % distribution charts can be found below:

* The bar in red indicates where Metallus's 5-Year Yield-on-Cost % falls into.


MTUS
72GF Score
Metallus Inc MTUS
5-Year Yield-on-Cost % is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

Metallus 5-Year Yield-on-Cost % Calculation

Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.

Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.

Therefore, Yield-on-Cost of Metallus is calculated as

Yield-on-Cost=Dividend Yield %*(1+Dividend Growth Rate)^5
Frequently Asked Questions Learn more about 5-Year Yield-on-Cost % →
What does a 5-Year Yield-on-Cost % of 0.00 mean?
Metallus (MTUS) has a 5-Year Yield-on-Cost % of 0.00 as of Jul. 14, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Metallus and its competitors. Over the past decade, Metallus' 5-Year Yield-on-Cost % has ranged from 1.24 to 1.63. According to the industry distribution chart, Metallus ranks #999999 out of 318 companies in the Steel industry.
Is Metallus' 5-Year Yield-on-Cost % too high?
Metallus' current 5-Year Yield-on-Cost % is 0.00. Over the past 10 years, this metric has ranged from a low of 1.24 to a high of 1.63. Based on the distribution chart, Metallus ranks #999999 out of 318 companies in the Steel industry, which is in the bottom quartile relative to peers. Overall, Metallus has a GF Score™ of 72/100 and is considered Fairly Valued, reflecting its overall financial health beyond just this single metric.
How does Metallus' 5-Year Yield-on-Cost % compare to MSB and FRD?
According to the Steel industry distribution chart, Metallus ranks #999999 out of 318 companies for 5-Year Yield-on-Cost %. This places Metallus in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 3.34. Historically, Metallus' own 5-Year Yield-on-Cost % has ranged from 1.24 to 1.63 over the past decade. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Steel company?
The median 5-Year Yield-on-Cost % among Steel companies is 3.34, based on 318 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Metallus and its competitors. For the Steel industry, the median 5-Year Yield-on-Cost % is 3.34 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Metallus's current 5-Year Yield-on-Cost % is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Metallus stock overvalued right now?
Based on GuruFocus' analysis, Metallus (MTUS) is currently considered Fairly Valued. The stock's GF Value™ is $19.36, compared to a current price of $19.30 — trading 0.3% below its estimated fair value. The current 5-Year Yield-on-Cost % is 0.00. Metallus' overall GF Score™ is 72/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Metallus (MTUS), the current 5-Year Yield-on-Cost % is 0.00 as of Jul. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is Metallus (MTUS) Overvalued in 2026?

Based on GuruFocus' analysis, Metallus stock appears to be undervalued. The current stock price of $19.30 is trading 0.3% below its estimated GF Value™ of $19.36. GuruFocus considers Metallus to be Fairly Valued.

Key valuation signals for MTUS:

  • 5-Year Yield-on-Cost %: 0.00
  • GF Value™: $19.36 vs. price of $19.30 (0.3% below fair value)
  • GF Score™: 72/100 with 5 warning signs

No single metric tells the full story. See the MTUS stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


Metallus Business Description

Address 1835 Dueber Avenue South West, Canton, OH, USA, 44706
Metallus Inc is an American-based manufacturer of alloy steel, as well as carbon and micro-alloy steel. The portfolio of the company includes special bar quality steel, seamless mechanical tubes, and value-added solutions, such as precision steel components. The company also supplies machining and thermal treatment services and manages raw material recycling programs that work as a feeder system for its melt operations. The company's products and services are used in the following sectors: oil and gas; automotive, industrial equipment; mining; construction; rail; aerospace and defense; heavy truck; agriculture and power generation. Geographically, the company mainly serves customers in the United States.
72GF Score

Get the complete analysis for MTUS

5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

$19.30
Price
$19.36
GF Value