Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Jiin Ming Industry CoROCO:3230 -1.22%50 5-Year Yield-on-Cost % is 0.86 as of Aug. 14, 2026, which is 3% below its 10-year median of 0.89. GuruFocus rates ROCO:3230 with a GF Score™ of 50/100 and a GF Value™ of NT$24.70 (Significantly Overvalued). The stock has 3 warning signs investors should review. Among 1,384 Hardware companies, Jiin Ming Industry Co ranks worse than 71.89% on this metric.
Jiin Ming Industry Co's yield on cost for the quarter that ended in Mar. 2026 was 0.86.
The historical rank and industry rank for Jiin Ming Industry Co's 5-Year Yield-on-Cost % or its related term are showing as below:
ROCO:3230'
s 5-Year Yield-on-Cost % Range Over the Past 10 Years
Min: 0.66 Med: 0.89 Max: 1.33
Current: 0.86
During the past 13 years, Jiin Ming Industry Co's highest Yield on Cost was 1.33. The lowest was 0.66. And the median was 0.89.
ROCO:3230's 5-Year Yield-on-Cost % is ranked worse than 71.89% of 1384
companies
in the Hardware industry
Industry Median: 2.06
vs ROCO:3230: 0.86
Jiin Ming Industry Co (ROCO:3230) 5-Year Yield-on-Cost % Explanation
Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.
Jiin Ming Industry Co 5-Year Yield-on-Cost % Related Terms
ROCO:3230 vs APH, GLW, TEL: 5-Year Yield-on-Cost % Comparison
For the Electronic Components subindustry, Jiin Ming Industry Co's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Jiin Ming Industry Co 5-Year Yield-on-Cost % vs Hardware Industry
For the Hardware industry and Technology sector, Jiin Ming Industry Co's 5-Year Yield-on-Cost % distribution charts can be found below:
* The bar in red indicates where Jiin Ming Industry Co's 5-Year Yield-on-Cost % falls into.
Jiin Ming Industry Co 5-Year Yield-on-Cost % Calculation
Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.
Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.
Jiin Ming Industry Co (ROCO:3230) has a 5-Year Yield-on-Cost % of 0.86 as of Aug. 14, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Jiin Ming Industry Co and its competitors. This is near median its historical median of 0.89. Over the past decade, Jiin Ming Industry Co's 5-Year Yield-on-Cost % has ranged from 0.66 to 1.33. According to the industry distribution chart, Jiin Ming Industry Co ranks #995 out of 1384 companies in the Hardware industry, placing it in the top 71.9%.
Is Jiin Ming Industry Co's 5-Year Yield-on-Cost % too high?
Jiin Ming Industry Co's current 5-Year Yield-on-Cost % of 0.86 is near median its 10-year median of 0.89. Over the past 10 years, this metric has ranged from a low of 0.66 to a high of 1.33. The Hardware industry median 5-Year Yield-on-Cost % is 2.06. Jiin Ming Industry Co's value of 0.86 is 58.3% below this industry median. Based on the distribution chart, Jiin Ming Industry Co ranks #995 out of 1384 companies in the Hardware industry, which is below the industry midpoint. Overall, Jiin Ming Industry Co has a GF Score™ of 50/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Jiin Ming Industry Co's 5-Year Yield-on-Cost % compare to APH and GLW?
According to the Hardware industry distribution chart, Jiin Ming Industry Co ranks #995 out of 1384 companies for 5-Year Yield-on-Cost %. This places Jiin Ming Industry Co in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 2.06. Jiin Ming Industry Co's value of 0.86 is 58.3% below this benchmark. Historically, Jiin Ming Industry Co's own 5-Year Yield-on-Cost % has ranged from 0.66 to 1.33 over the past decade. While the company's 10-year median is 0.89 vs. the industry median of 2.06, Jiin Ming Industry Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Hardware company?
The median 5-Year Yield-on-Cost % among Hardware companies is 2.06, based on 1,384 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Jiin Ming Industry Co's current 5-Year Yield-on-Cost % of 0.86 is 58.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on Jiin Ming Industry Co and its competitors. For the Hardware industry, the median 5-Year Yield-on-Cost % is 2.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Jiin Ming Industry Co's current 5-Year Yield-on-Cost % is 0.86, which is near median its own 10-year median of 0.89. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Jiin Ming Industry Co stock overvalued right now?
Based on GuruFocus' analysis, Jiin Ming Industry Co (ROCO:3230) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$24.70, compared to a current price of NT$40.45 — trading 63.8% above its estimated fair value. The current 5-Year Yield-on-Cost % is 0.86, which is near median its 10-year median of 0.89 and 58.3% below the Hardware industry median of 2.06. Jiin Ming Industry Co's overall GF Score™ is 50/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For Jiin Ming Industry Co (ROCO:3230), the current 5-Year Yield-on-Cost % is 0.86 as of Aug. 14, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Jiin Ming Industry Co (ROCO:3230) Overvalued in 2026?
Based on GuruFocus' analysis, Jiin Ming Industry Co stock appears to be overvalued.
The current stock price of NT$40.45 is trading 63.8% above its estimated GF Value™ of NT$24.70.
GuruFocus considers Jiin Ming Industry Co to be Significantly Overvalued.
Key valuation signals for ROCO:3230:
5-Year Yield-on-Cost %: 0.86 (near median its 10-year median of 0.89)
GF Value™: NT$24.70 vs. price of NT$40.45 (63.8% above fair value)
Industry Position: 58.3% below the Hardware median (#995 of 1384)
No single metric tells the full story. See the ROCO:3230 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Jiin Ming Industry Co Ltd is engaged in the manufacturing and processing of internal components and housings of various information, communication, and consumer electronic products and display parts, as well as the development and manufacturing of molds. It generates maximum revenue from the Hardware stamping parts. Geographically, the company derives a majority of its revenue from China.
50GF Score
Get the complete analysis for ROCO:3230
5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
ROCO:3230 has been successfully added to your 
