GMT Global (ROCO:4573) 5-Year Yield-on-Cost %: 0.00 (As of Aug. 07, 2026)

Author: Vera Yuan Vera Yuan
Vera Yuan
Vera Yuan
Director of Data and Quant Analytics at GuruFocus
Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Reviewed by: Charlie Tian Charlie Tian
Charlie Tian
Charlie Tian
Founder & CEO of GuruFocus
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.

ROCO:4573 GMT Global Inc ROCO:4573
52 GF Score
Price NT$368.00
GF Value NT$46.59
Valuation Significantly Overvalued
! 7 Warning Signs
View Full Analysis

What is GMT Global 5-Year Yield-on-Cost %?

GMT Global ROCO:4573 -3.48% 52 5-Year Yield-on-Cost % is 0.00 as of Aug. 07, 2026. GuruFocus rates ROCO:4573 with a GF Score™ of 52/100 and a GF Value™ of NT$46.59 (Significantly Overvalued). The stock has 7 warning signs investors should review. Among 1,391 Hardware companies, GMT Global ranks worse than 71890.65% on this metric.

GMT Global's yield on cost for the quarter that ended in Dec. 2025 was 0.00.


The historical rank and industry rank for GMT Global's 5-Year Yield-on-Cost % or its related term are showing as below:



ROCO:4573's 5-Year Yield-on-Cost % is not ranked *
in the Hardware industry.
Industry Median: 2.09
* Ranked among companies with meaningful 5-Year Yield-on-Cost % only.

GMT Global  (ROCO:4573) 5-Year Yield-on-Cost % Explanation

Of course the risk here is that the company may not raise its dividends as it did before. The key is to select the companies that can consistently raise its dividends. Usually companies with long history of raising dividends tend to do so.


GMT Global 5-Year Yield-on-Cost % Related Terms


ROCO:4573 vs APH, GLW, TEL: 5-Year Yield-on-Cost % Comparison

For the Electronic Components subindustry, GMT Global's 5-Year Yield-on-Cost %, along with its competitors' market caps and 5-Year Yield-on-Cost % data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


GMT Global 5-Year Yield-on-Cost % vs Hardware Industry

For the Hardware industry and Technology sector, GMT Global's 5-Year Yield-on-Cost % distribution charts can be found below:

* The bar in red indicates where GMT Global's 5-Year Yield-on-Cost % falls into.


ROCO:4573
52GF Score
GMT Global Inc ROCO:4573
5-Year Yield-on-Cost % is just one metric. See GF Score™, valuation, warning signs, and more.
View Full Analysis

GMT Global 5-Year Yield-on-Cost % Calculation

Dividend Yield % and dividend growth of a stock is an important factor for income investors. But if company A raises its dividend constantly faster than company B, company A's future dividend yield might be much higher than Company B's even if their yields are the same now and their stock prices do not change.

Yield on Cost assumes that you buy and the stock today, and hold it for 5 years. If the company raises it dividends at the same rate as it did over the past 5 years, the dividends investors receive annually in 5 years relative to the stock price today.

Therefore, Yield-on-Cost of GMT Global is calculated as

Yield-on-Cost=Dividend Yield %*(1+Dividend Growth Rate)^5
Frequently Asked Questions Learn more about 5-Year Yield-on-Cost % →
What does a 5-Year Yield-on-Cost % of 0.00 mean?
GMT Global (ROCO:4573) has a 5-Year Yield-on-Cost % of 0.00 as of Aug. 07, 2026. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on GMT Global and its competitors. According to the industry distribution chart, GMT Global ranks #999999 out of 1391 companies in the Hardware industry.
Is GMT Global's 5-Year Yield-on-Cost % too high?
GMT Global's current 5-Year Yield-on-Cost % is 0.00. Based on the distribution chart, GMT Global ranks #999999 out of 1391 companies in the Hardware industry, which is in the bottom quartile relative to peers. Overall, GMT Global has a GF Score™ of 52/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does GMT Global's 5-Year Yield-on-Cost % compare to APH and GLW?
According to the Hardware industry distribution chart, GMT Global ranks #999999 out of 1391 companies for 5-Year Yield-on-Cost %. This places GMT Global in the lower half of its industry. The industry median 5-Year Yield-on-Cost % is 2.09. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year Yield-on-Cost % for a Hardware company?
The median 5-Year Yield-on-Cost % among Hardware companies is 2.09, based on 1,391 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year Yield-on-Cost % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year Yield-on-Cost % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year Yield-on-Cost % mean?
A high 5-Year Yield-on-Cost % can signal that a stock is expensive relative to its fundamentals. 5-Year Yield on Cost measures the expected yield based on a company's current yield and 5-year dividend growth. View historical data on GMT Global and its competitors. For the Hardware industry, the median 5-Year Yield-on-Cost % is 2.09 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. GMT Global's current 5-Year Yield-on-Cost % is 0.00. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is GMT Global stock overvalued right now?
Based on GuruFocus' analysis, GMT Global (ROCO:4573) is currently considered Significantly Overvalued. The stock's GF Value™ is NT$46.59, compared to a current price of NT$368.00 — trading 689.9% above its estimated fair value. The current 5-Year Yield-on-Cost % is 0.00. GMT Global's overall GF Score™ is 52/100 with 7 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year Yield-on-Cost % calculated?
5-Year Yield-on-Cost % is calculated from a company's financial statements. For GMT Global (ROCO:4573), the current 5-Year Yield-on-Cost % is 0.00 as of Aug. 07, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.

Is GMT Global (ROCO:4573) Overvalued in 2026?

Based on GuruFocus' analysis, GMT Global stock appears to be overvalued. The current stock price of NT$368.00 is trading 689.9% above its estimated GF Value™ of NT$46.59. GuruFocus considers GMT Global to be Significantly Overvalued.

Key valuation signals for ROCO:4573:

  • 5-Year Yield-on-Cost %: 0.00
  • GF Value™: NT$46.59 vs. price of NT$368.00 (689.9% above fair value)
  • GF Score™: 52/100 with 7 warning signs

No single metric tells the full story. See the ROCO:4573 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.


GMT Global Business Description

Address No. 357, Section 1, Yaofeng Road, Puxin Township, Changhua County, Changhua, TWN, 513004
GMT Global Inc is engaged in Electronic components manufacturing industry. The company focuses on the manufacturing and sale of metal molds, automation modules, and related components. The product line of the company includes the Precision positioning platform includes fiber optic and waveguide coupling equipment and a high-precision alignment platform to meet precision machining requirements; and the Drive and Automation Modules engaged in providing electric slides, drive components and various automation modules to improve the efficiency of industrial applications. The products of the company include Direct drive module series, Manual slide, Alignment platform, Transmission components, Automation slide Module, Sintering Machine, and others. The Group operates in Asia, Europe and Others.
52GF Score

Get the complete analysis for ROCO:4573

5-Year Yield-on-Cost % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.

NT$368.00
Price
NT$46.59
GF Value