Focused on building reliable datasets, financial models, and research tools for value-minded investors. Committed to turning complex data into practical guidance for value-investing and long-term wealth.
Dr. Charlie Tian is the founder and CEO of GuruFocus.com, a leading global investment research platform established in 2004. With a Ph.D. in physics, Dr. Tian transitioned from science to finance, applying a data-driven, disciplined approach to value investing.
Okamoto Machine Tool WorksTSE:6125 -6.18%61 Dividend Yield % is 3.10% as of Jul. 20, 2026, which is 3% below its 10-year median of 3.21. GuruFocus rates TSE:6125 with a GF Score™ of 61/100 and a GF Value™ of 円3,502.81 (Significantly Overvalued). The stock has 12 warning signs investors should review. Among 1,925 Industrial Products companies, Okamoto Machine Tool Works ranks better than 76.42% on this metric.
If a company's dividend payout ratio is too high, its dividend may not be sustainable. The dividend payout ratio of Okamoto Machine Tool Works Ltd is 0.92, which seems too high.
During the past 13 years, the highest Dividend Payout Ratio of Okamoto Machine Tool Works was 0.94. The lowest was 0.12. And the median was 0.21.
During the past 3 years, the average Dividends Per Share Growth Rate was -3.90% per year.
During the past 5 years, the average Dividends Per Share Growth Rate was 16.70% per year.
During the past 10 years, the average Dividends Per Share Growth Rate was 19.40% per year.
During the past 13 years, the highest 3-Year average Dividends Per Share Growth Rate of Okamoto Machine Tool Works was 49.40% per year. The lowest was -3.90% per year. And the median was 20.10% per year.
The growth rate is calculated with least square regression.
For more information regarding to dividend, please check our Dividend Page.
* Please note that "special dividend" is not included in the calculation of dividend per share and related fields.
Okamoto Machine Tool Works (TSE:6125) Dividend Yield % Explanation
Over the long term, the return from dividends has been a significant contributor to the total returns produced by equity securities. Studies by Elroy Dimson, Paul Marsh, and Mike Staunton of Princeton University (2002) found that a market-oriented portfolio, which included reinvested dividends, would have generated nearly 85 times the wealth generated by the same portfolio relying solely on capital gains.
Dividends may also qualify a lower tax rate for investors.
In dividends investing, Payout Ratio and Dividend Growth Rate are the two most important variables for consideration. A lower payout ratio may indicate that the company has more room to increase its dividends.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TSE:6125 vs GEV, ETN, PH: Dividend Yield % Comparison
For the Specialty Industrial Machinery subindustry, Okamoto Machine Tool Works's Dividend Yield %, along with its competitors' market caps and Dividend Yield % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Okamoto Machine Tool Works Dividend Yield % vs Industrial Products Industry
For the Industrial Products industry and Industrials sector, Okamoto Machine Tool Works's Dividend Yield % distribution charts can be found below:
* The bar in red indicates where Okamoto Machine Tool Works's Dividend Yield % falls into.
Okamoto Machine Tool Works Dividend Yield % Calculation
Dividend Yield measures how much a company pays out in dividends each year relative to its share price.
Okamoto Machine Tool Works Recent Full-Year* Dividend History
Amount
Ex-date
Record Date
Pay Date
Type
Frequency
Forex Rate
JPY 80.000000
2026-03-30
2026-03-31
2026-06-29
Cash Dividend
semi-annually
JPY:JPY 1.000000
JPY 80.000000
2025-09-29
2025-09-30
2025-12-08
Cash Dividend
semi-annually
JPY:JPY 1.000000
* GuruFocus has an internal rule that if the most recent dividend payment frequency is at least 4 times a year, then the full year will be calculated according to the frequency of payment or the one-year time frame, whichever is stricter.
* GuruFocus converts dividend currency to local traded share price currency in order to calculate dividend yield. Please refer to the last column "Forex Rate" in the above table.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Okamoto Machine Tool Works (TSE:6125) has a Dividend Yield % of 3.10% as of Jul. 20, 2026. Dividend yield is the ratio of company dividends to the share price. View historical data on Okamoto Machine Tool Works and its competitors. This is near median its historical median of 3.21. Over the past decade, Okamoto Machine Tool Works' Dividend Yield % has ranged from 0.80 to 6.41. According to the industry distribution chart, Okamoto Machine Tool Works ranks #454 out of 1925 companies in the Industrial Products industry, placing it in the top 23.6%.
Is Okamoto Machine Tool Works' Dividend Yield % too high?
Okamoto Machine Tool Works' current Dividend Yield % of 3.10% is near median its 10-year median of 3.21. Over the past 10 years, this metric has ranged from a low of 0.80 to a high of 6.41. The Industrial Products industry median Dividend Yield % is 1.53. Okamoto Machine Tool Works' value of 3.10% is 102.6% above this industry median. Based on the distribution chart, Okamoto Machine Tool Works ranks #454 out of 1925 companies in the Industrial Products industry, which is in the top quartile — a strong position relative to peers. Overall, Okamoto Machine Tool Works has a GF Score™ of 61/100 and is considered Significantly Overvalued, reflecting its overall financial health beyond just this single metric.
How does Okamoto Machine Tool Works' Dividend Yield % compare to GEV and ETN?
According to the Industrial Products industry distribution chart, Okamoto Machine Tool Works ranks #454 out of 1925 companies for Dividend Yield %. This places Okamoto Machine Tool Works in the top 24% of its industry — outperforming the majority of peers. The industry median Dividend Yield % is 1.53. Okamoto Machine Tool Works' value of 3.10% is 102.6% above this benchmark. Historically, Okamoto Machine Tool Works' own Dividend Yield % has ranged from 0.80 to 6.41 over the past decade. While the company's 10-year median is 3.21 vs. the industry median of 1.53, Okamoto Machine Tool Works has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Dividend Yield % for an Industrial Products company?
The median Dividend Yield % among Industrial Products companies is 1.53, based on 1,925 companies in the industry. Companies in the top quartile (top 25%) have a Dividend Yield % significantly above this median, while those in the bottom quartile fall well below. However, Dividend Yield % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Okamoto Machine Tool Works's current Dividend Yield % of 3.10% is 102.6% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Dividend Yield % mean?
A high Dividend Yield % can signal that a stock is expensive relative to its fundamentals. Dividend yield is the ratio of company dividends to the share price. View historical data on Okamoto Machine Tool Works and its competitors. For the Industrial Products industry, the median Dividend Yield % is 1.53 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Okamoto Machine Tool Works's current Dividend Yield % is 3.10%, which is near median its own 10-year median of 3.21. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Okamoto Machine Tool Works stock overvalued right now?
Based on GuruFocus' analysis, Okamoto Machine Tool Works (TSE:6125) is currently considered Significantly Overvalued. The stock's GF Value™ is 円3,502.81, compared to a current price of 円5,160.00 — trading 47.3% above its estimated fair value. The current Dividend Yield % is 3.10%, which is near median its 10-year median of 3.21 and 102.6% above the Industrial Products industry median of 1.53. Okamoto Machine Tool Works' overall GF Score™ is 61/100 with 12 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Dividend Yield % calculated?
Dividend Yield % is calculated from a company's financial statements. For Okamoto Machine Tool Works (TSE:6125), the current Dividend Yield % is 3.10% as of Jul. 20, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Okamoto Machine Tool Works (TSE:6125) Overvalued in 2026?
Based on GuruFocus' analysis, Okamoto Machine Tool Works stock appears to be overvalued.
The current stock price of 円5,160.00 is trading 47.3% above its estimated GF Value™ of 円3,502.81.
GuruFocus considers Okamoto Machine Tool Works to be Significantly Overvalued.
Key valuation signals for TSE:6125:
Dividend Yield %: 3.10% (near median its 10-year median of 3.21)
GF Value™: 円3,502.81 vs. price of 円5,160.00 (47.3% above fair value)
Industry Position: 102.6% above the Industrial Products median (#454 of 1925)
No single metric tells the full story. See the TSE:6125 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Okamoto Machine Tool Works Ltd is engaged in the manufacture and sale of various grinding machines and semiconductor-related manufacturing equipment. The company's reportable segments are the machine tool business and the semiconductor-related equipment business. The majority of its revenue is generated from the machine tools business, which mainly produces and sells grinding machines, precision gears, and castings. The semiconductor-related equipment business manufactures and sells polishing machines, grinding machines, and slicing machines.
61GF Score
Get the complete analysis for TSE:6125
Dividend Yield % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TSE:6125 has been successfully added to your 
