Apex Science & EngineeringTPE:3052 -0.45%65 Altman Z2-Score is 2.36 as of Jul. 06, 2026, which is 27% below its 10-year median of 3.22. GuruFocus rates TPE:3052 with a GF Score™ of 65/100 and a GF Value™ of NT$13.00 (Modestly Undervalued). The stock has 3 warning signs investors should review. Among 1,764 Construction companies, Apex Science & Engineering ranks worse than 62.07% on this metric.
Altman Z2-Score, also known as Z"-Score, is used to predict the likelihood that a non-manufacturing company (excluding property/financial company) will face bankruptcy within a two-year period.
Apex Science & Engineering has a Altman Z2-Score of 2.36, indicating it is in Grey Zones. This implies that Apex Science & Engineering is in some kind of financial stress. If it is below 1.1, the company may face bankrupcy risk.
The zones of discrimination were as such:
When Altman Z2-Score <= 1.1, it is in Distress Zones.
When Altman Z2-Score >= 2.6, it is in Safe Zones.
When Altman Z2-Score is between 1.1 and 2.6, it is in Grey Zones.
The historical rank and industry rank for Apex Science & Engineering's Altman Z2-Score or its related term are showing as below:
TPE:3052'
s Altman Z2-Score Range Over the Past 10 Years
Min: 1.95 Med: 3.22 Max: 4.2
Current: 2.36
During the past 13 years, Apex Science & Engineering's highest Altman Z2-Score was 4.20. The lowest was 1.95. And the median was 3.22.
The original Z-Score model was based on publicly traded manufacturing companies while the Z2-Score, also known as Z"-score can be used for any type of company excluding property/financial companies. Both Z-Score and Z2-Score describes the financial health of a company, and its likelihood of financial distress.
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:3052 vs PWR, FIX, EME: Altman Z2-Score Comparison
For the Engineering & Construction subindustry, Apex Science & Engineering's Altman Z2-Score, along with its competitors' market caps and Altman Z2-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Apex Science & Engineering Altman Z2-Score vs Construction Industry
For the Construction industry and Industrials sector, Apex Science & Engineering's Altman Z2-Score distribution charts can be found below:
* The bar in red indicates where Apex Science & Engineering's Altman Z2-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Z2-Score, also known as Z"-Score is the Z-Score for non-manufacturing companies excluding property/financial companies.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z2-Score when X4_2 value is 0.
Apex Science & Engineering (TPE:3052) has a Altman Z2-Score of 2.36 as of Jul. 06, 2026. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Apex Science & Engineering and its competitors. This is 27% below median its historical median of 3.22. Over the past decade, Apex Science & Engineering's Altman Z2-Score has ranged from 1.95 to 4.20. According to the industry distribution chart, Apex Science & Engineering ranks #1095 out of 1764 companies in the Construction industry, placing it in the top 62.1%.
Is Apex Science & Engineering's Altman Z2-Score too high?
Apex Science & Engineering's current Altman Z2-Score of 2.36 is 27% below median its 10-year median of 3.22. Over the past 10 years, this metric has ranged from a low of 1.95 to a high of 4.20. The Construction industry median Altman Z2-Score is 3.21. Apex Science & Engineering's value of 2.36 is 26.5% below this industry median. Based on the distribution chart, Apex Science & Engineering ranks #1095 out of 1764 companies in the Construction industry, which is below the industry midpoint. Overall, Apex Science & Engineering has a GF Score™ of 65/100 and is considered Modestly Undervalued, reflecting its overall financial health beyond just this single metric.
How does Apex Science & Engineering's Altman Z2-Score compare to PWR and FIX?
According to the Construction industry distribution chart, Apex Science & Engineering ranks #1095 out of 1764 companies for Altman Z2-Score. This places Apex Science & Engineering in the lower half of its industry. The industry median Altman Z2-Score is 3.21. Apex Science & Engineering's value of 2.36 is 26.5% below this benchmark. Historically, Apex Science & Engineering's own Altman Z2-Score has ranged from 1.95 to 4.20 over the past decade. While the company's 10-year median is 3.22 vs. the industry median of 3.21, Apex Science & Engineering has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z2-Score for a Construction company?
The median Altman Z2-Score among Construction companies is 3.21, based on 1,764 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z2-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z2-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Apex Science & Engineering's current Altman Z2-Score of 2.36 is 26.5% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z2-Score mean?
A high Altman Z2-Score can signal that a stock is expensive relative to its fundamentals. Z2-Score is the Z-Score for non-manufacturing companies excluding property/financial companies, which measures a company's bankruptcy risk. View historical data on Apex Science & Engineering and its competitors. For the Construction industry, the median Altman Z2-Score is 3.21 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Apex Science & Engineering's current Altman Z2-Score is 2.36, which is 27% below median its own 10-year median of 3.22. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Apex Science & Engineering stock overvalued right now?
Based on GuruFocus' analysis, Apex Science & Engineering (TPE:3052) is currently considered Modestly Undervalued. The stock's GF Value™ is NT$13.00, compared to a current price of NT$11.00 — trading 15.4% below its estimated fair value. The current Altman Z2-Score is 2.36, which is 27% below median its 10-year median of 3.22 and 26.5% below the Construction industry median of 3.21. Apex Science & Engineering's overall GF Score™ is 65/100 with 3 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z2-Score calculated?
Altman Z2-Score is calculated from a company's financial statements. For Apex Science & Engineering (TPE:3052), the current Altman Z2-Score is 2.36 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Apex Science & Engineering (TPE:3052) Overvalued in 2026?
Based on GuruFocus' analysis, Apex Science & Engineering stock appears to be undervalued.
The current stock price of NT$11.00 is trading 15.4% below its estimated GF Value™ of NT$13.00.
GuruFocus considers Apex Science & Engineering to be Modestly Undervalued.
Key valuation signals for TPE:3052:
Altman Z2-Score: 2.36 (27% below median its 10-year median of 3.22)
GF Value™: NT$13.00 vs. price of NT$11.00 (15.4% below fair value)
Industry Position: 26.5% below the Construction median (#1095 of 1764)
No single metric tells the full story. See the TPE:3052 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Apex Science & Engineering Corp, and its subsidiaries, work on projects in mechanical engineering, instrument engineering, environment engineering, related electrical products manufacturing and sales, entrusted construction of factories, residential and commercial buildings, as well as development of special zones, etc.
65GF Score
Get the complete analysis for TPE:3052
Altman Z2-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:3052 has been successfully added to your 
