Ruentex Materials CoTPE:8463 +0.70%79 Altman Z-Score is 1.21 as of Jul. 06, 2026, which is 21% below its 10-year median of 1.53. GuruFocus rates TPE:8463 with a GF Score™ of 79/100 and a GF Value™ of NT$35.71 (Possible Value Trap). The stock has 5 warning signs investors should review. Among 403 Building Materials companies, Ruentex Materials Co ranks worse than 78.16% on this metric.
The Altman Z-Score is a model designed to predict the likelihood of a company going bankrupt within the next two years. Created by American finance professor Edward Altman in 1968, the model is specifically designed for publicly traded manufacturing companies with assets greater than $1 million.
Warning Sign:
Altman Z-score of 1.21 is in distress zone. This implies bankruptcy possibility in the next two years.
Ruentex Materials Co has a Altman Z-Score of 1.21, indicating it is in Distress Zones. This implies bankrupcy possibility in the next two years.
The zones of discrimination were as such:
When Altman Z-Score <= 1.8, it is in Distress Zones.
When Altman Z-Score >= 3, it is in Safe Zones.
When Altman Z-Score is between 1.8 and 3, it is in Grey Zones.
The historical rank and industry rank for Ruentex Materials Co's Altman Z-Score or its related term are showing as below:
TPE:8463'
s Altman Z-Score Range Over the Past 10 Years
Min: 1.09 Med: 1.53 Max: 2.26
Current: 1.21
During the past 13 years, Ruentex Materials Co's highest Altman Z-Score was 2.26. The lowest was 1.09. And the median was 1.53.
Ruentex Materials Co (TPE:8463) Altman Z-Score Explanation
X1: The Working Capital/Total Assets (WC/TA) ratio is a measure of the net liquid assets of the firm relative to the total capitalization. Working capital is defined as the difference between current assets and current liabilities. Ordinarily, a firm experiencing consistent operating losses will have shrinking current assets in relation to total assets. Altman found this one proved to be the most valuable liquidity ratio comparing with the current ratio and the quick ratio. This is however the least significant of the five factors.
X2: Retained Earnings/Total Assets: the RE/TA ratio measures the leverage of a firm. Retained earnings is the account which reports the total amount of reinvested earnings and/or losses of a firm over its entire life. Those firms with high RE, relative to TA, have financed their assets through retention of profits and have not utilized as much debt.
X3, Earnings Before Interest and Taxes/Total Assets (EBIT/TA): This ratio is a measure of the true productivity of the firm's assets, independent of any tax or leverage factors. Since a firm's ultimate existence is based on the earning power of its assets, this ratio appears to be particularly appropriate for studies dealing with corporate failure. This ratio continually outperforms other profitability measures, including cash flow.
X4, Market Value of Equity/Book Value of Total Liabilities (MVE/TL): The measure shows how much the firm's assets can decline in value (measured by market value of equity plus debt) before the liabilities exceed the assets and the firm becomes insolvent.
X5, Revenue/Total Assets (S/TA): The capital-turnover ratio is a standard financial ratio illustrating the sales generating ability of the firm's assets.
Altman Z-Score does not apply to financial companies.
Ruentex Materials Co Altman Z-Score Related Terms
Ruentex Materials Co Altman Z-Score Historical Data
* Premium members only.
The historical data trend for Ruentex Materials Co's Altman Z-Score can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
TPE:8463 vs CRH, VMC, MLM: Altman Z-Score Comparison
For the Building Materials subindustry, Ruentex Materials Co's Altman Z-Score, along with its competitors' market caps and Altman Z-Score data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Ruentex Materials Co Altman Z-Score vs Building Materials Industry
For the Building Materials industry and Basic Materials sector, Ruentex Materials Co's Altman Z-Score distribution charts can be found below:
* The bar in red indicates where Ruentex Materials Co's Altman Z-Score falls into.
Altman Z-Score model is an accurate forecaster of failure up to two years prior to distress. It can be considered the assessment of the distress of industrial corporations.
Ruentex Materials Co's Altman Z-Score for today is calculated with this formula:
Z
=
1.2
*
X1
+
1.4
*
X2
+
3.3
*
X3
+
0.6
*
X4
+
1.0
*
X5
=
1.2
*
-0.0245
+
1.4
*
0.0287
+
3.3
*
0.0629
+
0.6
*
0.4619
+
1.0
*
0.7152
=
1.21
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency. GuruFocus does not calculate Altman Z-Score when X4 or X5 value is 0.
Ruentex Materials Co (TPE:8463) has a Altman Z-Score of 1.21 as of Jul. 06, 2026. The Altman Z-score measures a company's bankruptcy risk. View historical data on Ruentex Materials Co and its competitors. This is 21% below median its historical median of 1.53. Over the past decade, Ruentex Materials Co's Altman Z-Score has ranged from 1.09 to 2.26. According to the industry distribution chart, Ruentex Materials Co ranks #315 out of 403 companies in the Building Materials industry, placing it in the top 78.2%.
Is Ruentex Materials Co's Altman Z-Score too high?
Ruentex Materials Co's current Altman Z-Score of 1.21 is 21% below median its 10-year median of 1.53. Over the past 10 years, this metric has ranged from a low of 1.09 to a high of 2.26. The Building Materials industry median Altman Z-Score is 2.24. Ruentex Materials Co's value of 1.21 is 46% below this industry median. Based on the distribution chart, Ruentex Materials Co ranks #315 out of 403 companies in the Building Materials industry, which is in the bottom quartile relative to peers. Overall, Ruentex Materials Co has a GF Score™ of 79/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Ruentex Materials Co's Altman Z-Score compare to CRH and VMC?
According to the Building Materials industry distribution chart, Ruentex Materials Co ranks #315 out of 403 companies for Altman Z-Score. This places Ruentex Materials Co in the lower half of its industry. The industry median Altman Z-Score is 2.24. Ruentex Materials Co's value of 1.21 is 46% below this benchmark. Historically, Ruentex Materials Co's own Altman Z-Score has ranged from 1.09 to 2.26 over the past decade. While the company's 10-year median is 1.53 vs. the industry median of 2.24, Ruentex Materials Co has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Altman Z-Score for a Building Materials company?
The median Altman Z-Score among Building Materials companies is 2.24, based on 403 companies in the industry. Companies in the top quartile (top 25%) have a Altman Z-Score significantly above this median, while those in the bottom quartile fall well below. However, Altman Z-Score should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Ruentex Materials Co's current Altman Z-Score of 1.21 is 46% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Altman Z-Score mean?
A high Altman Z-Score can signal that a stock is expensive relative to its fundamentals. The Altman Z-score measures a company's bankruptcy risk. View historical data on Ruentex Materials Co and its competitors. For the Building Materials industry, the median Altman Z-Score is 2.24 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Ruentex Materials Co's current Altman Z-Score is 1.21, which is 21% below median its own 10-year median of 1.53. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Ruentex Materials Co stock overvalued right now?
Based on GuruFocus' analysis, Ruentex Materials Co (TPE:8463) is currently considered Possible Value Trap. The stock's GF Value™ is NT$35.71, compared to a current price of NT$21.55 — trading 39.7% below its estimated fair value. The current Altman Z-Score is 1.21, which is 21% below median its 10-year median of 1.53 and 46% below the Building Materials industry median of 2.24. Ruentex Materials Co's overall GF Score™ is 79/100 with 5 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Altman Z-Score calculated?
Altman Z-Score is calculated from a company's financial statements. For Ruentex Materials Co (TPE:8463), the current Altman Z-Score is 1.21 as of Jul. 06, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Ruentex Materials Co (TPE:8463) Overvalued in 2026?
Based on GuruFocus' analysis, Ruentex Materials Co stock appears to be undervalued.
The current stock price of NT$21.55 is trading 39.7% below its estimated GF Value™ of NT$35.71.
GuruFocus considers Ruentex Materials Co to be Possible Value Trap.
Key valuation signals for TPE:8463:
Altman Z-Score: 1.21 (21% below median its 10-year median of 1.53)
GF Value™: NT$35.71 vs. price of NT$21.55 (39.7% below fair value)
Industry Position: 46% below the Building Materials median (#315 of 403)
No single metric tells the full story. See the TPE:8463 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Ruentex Materials Co Ltd is engaged in the manufacturing and sale of semi-finished cement products. The company is also engaged in mining, manufacturing, and distribution of cement raw materials and mining and distribution of mineral ore, quarrying, building materials development, manufacture, and distribution, manufacture, and sale of clay used for wall primer, powder coating material, tile adhesive, self-leveling cement, and dry-mixed cement mortar applications The product portfolio of the company includes Portland blast furnace cement, Portland cement, Hearthstone powder. The company's revenue is mainly from three lines of business such as Cement business, Construction materials business, and Engineering and construction business.
79GF Score
Get the complete analysis for TPE:8463
Altman Z-Score is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
TPE:8463 has been successfully added to your 
