Strip Tinning HoldingsLSE:STG 30 Current Ratio is 1.02 as of Dec. 2025, which is 51% below its 10-year median of 2.10. GuruFocus rates LSE:STG with a GF Score™ of 30/100 and a GF Value™ of £0.35 (Possible Value Trap). The stock has 6 warning signs investors should review. Among 1,337 Vehicles & Parts companies, Strip Tinning Holdings ranks worse than 81.75% on this metric.
The current ratio is a liquidity ratio that measures a company's ability to pay short-term obligations. It is calculated as a company's Total Current Assets divides by its Total Current Liabilities. Strip Tinning Holdings's current ratio for the quarter that ended in Dec. 2025 was 1.02.
Strip Tinning Holdings has a current ratio of 1.02. It generally indicates good short-term financial strength.
The historical rank and industry rank for Strip Tinning Holdings's Current Ratio or its related term are showing as below:
LSE:STG'
s Current Ratio Range Over the Past 10 Years
Min: 1.02 Med: 2.1 Max: 2.81
Current: 1.02
During the past 9 years, Strip Tinning Holdings's highest Current Ratio was 2.81. The lowest was 1.02. And the median was 2.10.
LSE:STG's Current Ratio is ranked worse than 81.75% of 1337
companies
in the Vehicles & Parts industry
Industry Median: 1.53
vs LSE:STG: 1.02
Strip Tinning Holdings (LSE:STG) Current Ratio Explanation
The current ratio can give a sense of the efficiency of a company's operating cycle or its ability to turn its product into cash. Companies that have trouble getting paid on their receivables or have long inventory turnover can run into liquidity problems because they are unable to alleviate their obligations. Because business operations differ in each industry, it is always more useful to compare companies within the same industry.
Acceptable current ratios vary from industry to industry and are generally between 1 and 3 for healthy businesses.
The higher the current ratio, the more capable the company is of paying its obligations. A ratio under 1 suggests that the company would be unable to pay off its obligations if they came due at that point. While this shows the company is not in good financial health, it does not necessarily mean that it will go bankrupt - as there are many ways to access financing - but it is definitely not a good sign.
If all other things were equal, a creditor, who is expecting to be paid in the next 12 months, would consider a high current ratio to be better than a low current ratio, because a high current ratio means that the company is more likely to meet its liabilities which fall due in the next 12 months.
Strip Tinning Holdings Current Ratio Related Terms
Strip Tinning Holdings Current Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
LSE:STG vs ORLY, AZO, GPC: Current Ratio Comparison
For the Auto Parts subindustry, Strip Tinning Holdings's Current Ratio, along with its competitors' market caps and Current Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Strip Tinning Holdings Current Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Strip Tinning Holdings's Current Ratio distribution charts can be found below:
* The bar in red indicates where Strip Tinning Holdings's Current Ratio falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Strip Tinning Holdings (LSE:STG) has a Current Ratio of 1.02 as of Dec. 2025. This is 51% below median its historical median of 2.10. Over the past decade, Strip Tinning Holdings' Current Ratio has ranged from 1.02 to 2.81. According to the industry distribution chart, Strip Tinning Holdings ranks #1093 out of 1337 companies in the Vehicles & Parts industry, placing it in the top 81.8%.
Is Strip Tinning Holdings' Current Ratio too high?
Strip Tinning Holdings' current Current Ratio of 1.02 is 51% below median its 10-year median of 2.10. Over the past 10 years, this metric has ranged from a low of 1.02 to a high of 2.81. The Vehicles & Parts industry median Current Ratio is 1.53. Strip Tinning Holdings' value of 1.02 is 33.3% below this industry median. Based on the distribution chart, Strip Tinning Holdings ranks #1093 out of 1337 companies in the Vehicles & Parts industry, which is in the bottom quartile relative to peers. Overall, Strip Tinning Holdings has a GF Score™ of 30/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Strip Tinning Holdings' Current Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Strip Tinning Holdings ranks #1093 out of 1337 companies for Current Ratio. This places Strip Tinning Holdings in the lower half of its industry. The industry median Current Ratio is 1.53. Strip Tinning Holdings' value of 1.02 is 33.3% below this benchmark. Historically, Strip Tinning Holdings' own Current Ratio has ranged from 1.02 to 2.81 over the past decade. While the company's 10-year median is 2.10 vs. the industry median of 1.53, Strip Tinning Holdings has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Current Ratio for a Vehicles & Parts company?
The median Current Ratio among Vehicles & Parts companies is 1.53, based on 1,337 companies in the industry. Companies in the top quartile (top 25%) have a Current Ratio significantly above this median, while those in the bottom quartile fall well below. However, Current Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Strip Tinning Holdings's current Current Ratio of 1.02 is 33.3% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Current Ratio mean?
A high Current Ratio can signal that a stock is expensive relative to its fundamentals. For the Vehicles & Parts industry, the median Current Ratio is 1.53 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Strip Tinning Holdings's current Current Ratio is 1.02, which is 51% below median its own 10-year median of 2.10. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Strip Tinning Holdings stock overvalued right now?
Based on GuruFocus' analysis, Strip Tinning Holdings (LSE:STG) is currently considered Possible Value Trap. The stock's GF Value™ is £0.35, compared to a current price of £0.18 — trading 50% below its estimated fair value. The current Current Ratio is 1.02, which is 51% below median its 10-year median of 2.10 and 33.3% below the Vehicles & Parts industry median of 1.53. Strip Tinning Holdings' overall GF Score™ is 30/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Current Ratio calculated?
Current Ratio is calculated from a company's financial statements. For Strip Tinning Holdings (LSE:STG), the current Current Ratio is 1.02 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Strip Tinning Holdings (LSE:STG) Overvalued in 2026?
Based on GuruFocus' analysis, Strip Tinning Holdings stock appears to be undervalued.
The current stock price of £0.18 is trading 50% below its estimated GF Value™ of £0.35.
GuruFocus considers Strip Tinning Holdings to be Possible Value Trap.
Key valuation signals for LSE:STG:
Current Ratio: 1.02 (51% below median its 10-year median of 2.10)
GF Value™: £0.35 vs. price of £0.18 (50% below fair value)
Industry Position: 33.3% below the Vehicles & Parts median (#1093 of 1337)
No single metric tells the full story. See the LSE:STG stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Strip Tinning Holdings PLC is as a holding company which manufactures automotive busbar, ancillary connectors and flexible printed circuits. Its activities are design and manufacture of a full suite of glazing connectors, Flexible Printed Circuits and Cell Contact Systems for Electric Vehicles. It has four product groups, all serving the automotive electrical connector market. Glazing segment is made up of Busbar and Connectors, whilst its Battery Technology (BT)segment contains Flexible Printed Circuits (FPC) and Cell Contacting Systems (CCS). The Battery Technology segment has other uses such as static battery storage and other adjacent markets. Its segments are Glazing, and EV. It generates majority of revenue from Glazing. It has presence in UK, Rest of Europe, and Rest of world.
30GF Score
Get the complete analysis for LSE:STG
Current Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
LSE:STG has been successfully added to your 
