Return on Retained Earnings (RORE) is an indicator of a company's growth potential, it shows how much a company earns by reinvesting its retained earnings, i.e. profits after dividend payments.
Strip Tinning Holdings's 5-Year RORE % for the quarter that ended in Dec. 2025 was 7.18%.
The industry rank for Strip Tinning Holdings's 5-Year RORE % or its related term are showing as below:
LSE:STG's 5-Year RORE % is ranked worse than 52.47% of 1155
companies
in the Vehicles & Parts industry
Industry Median: 8.95
vs LSE:STG: 7.18
Return on Retained Earnings (RORE) is important to investors because it reveals a company's efficiency and growth potential. A higher RORE indicates a higher return. A high RORE indicates that the company should reinvest profits into the business. A lower RORE suggests that the company should distribute profits to shareholders by paying out dividends, since those dollars aren't generating much additional growth for the company.
There are a several different ways to arrive at the Return on Retained Earnings. The simplest way to calculate it is by using published information on Earnings per Share (EPS) and Dividend per Share (DPS) over a selected period. Here, 5-year period is chosen.
Be Aware
Please keep in mind that the RORE is relative to the nature of the business and its competitors. If another company in the same sector is producing a lower return on retained earnings, it doesn’t necessarily mean it’s a bad investment. It may just suggest the company is older and no longer in a high growth stage. At such a stage in the business cycle, it would be expected to see a lower RORE and higher dividend payout.
Strip Tinning Holdings 5-Year RORE % Related Terms
Strip Tinning Holdings 5-Year RORE % Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
LSE:STG vs ORLY, AZO, GPC: 5-Year RORE % Comparison
For the Auto Parts subindustry, Strip Tinning Holdings's 5-Year RORE %, along with its competitors' market caps and 5-Year RORE % data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Strip Tinning Holdings 5-Year RORE % vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Strip Tinning Holdings's 5-Year RORE % distribution charts can be found below:
* The bar in red indicates where Strip Tinning Holdings's 5-Year RORE % falls into.
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
In the calculation of 5-Year RORE %, the most recent and first period EPS (Diluted) is the trailing twelve months (TTM) data ended in Dec. 2025 and 5-year before.
Strip Tinning Holdings (LSE:STG) has a 5-Year RORE % of 7.18 as of Dec. 2025. 5-Year RORE % shows how much a company earns by reinvesting its retained earnings in 5-year. View historical data on Strip Tinning Holdings and its competitors. According to the industry distribution chart, Strip Tinning Holdings ranks #606 out of 1155 companies in the Vehicles & Parts industry, placing it in the top 52.5%.
Is Strip Tinning Holdings' 5-Year RORE % too high?
Strip Tinning Holdings' current 5-Year RORE % is 7.18. The Vehicles & Parts industry median 5-Year RORE % is 8.95. Strip Tinning Holdings' value of 7.18 is 19.8% below this industry median. Based on the distribution chart, Strip Tinning Holdings ranks #606 out of 1155 companies in the Vehicles & Parts industry, which is below the industry midpoint. Overall, Strip Tinning Holdings has a GF Score™ of 30/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Strip Tinning Holdings' 5-Year RORE % compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Strip Tinning Holdings ranks #606 out of 1155 companies for 5-Year RORE %. This places Strip Tinning Holdings in the lower half of its industry. The industry median 5-Year RORE % is 8.95. Strip Tinning Holdings' value of 7.18 is 19.8% below this benchmark. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good 5-Year RORE % for a Vehicles & Parts company?
The median 5-Year RORE % among Vehicles & Parts companies is 8.95, based on 1,155 companies in the industry. Companies in the top quartile (top 25%) have a 5-Year RORE % significantly above this median, while those in the bottom quartile fall well below. However, 5-Year RORE % should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Strip Tinning Holdings's current 5-Year RORE % of 7.18 is 19.8% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high 5-Year RORE % mean?
A high 5-Year RORE % can signal that a stock is expensive relative to its fundamentals. 5-Year RORE % shows how much a company earns by reinvesting its retained earnings in 5-year. View historical data on Strip Tinning Holdings and its competitors. For the Vehicles & Parts industry, the median 5-Year RORE % is 8.95 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Strip Tinning Holdings's current 5-Year RORE % is 7.18. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Strip Tinning Holdings stock overvalued right now?
Based on GuruFocus' analysis, Strip Tinning Holdings (LSE:STG) is currently considered Possible Value Trap. The stock's GF Value™ is £0.35, compared to a current price of £0.19 — trading 47.1% below its estimated fair value. The current 5-Year RORE % is 7.18 and 19.8% below the Vehicles & Parts industry median of 8.95. Strip Tinning Holdings' overall GF Score™ is 30/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is 5-Year RORE % calculated?
5-Year RORE % is calculated from a company's financial statements. For Strip Tinning Holdings (LSE:STG), the current 5-Year RORE % is 7.18 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Strip Tinning Holdings (LSE:STG) Overvalued in 2026?
Based on GuruFocus' analysis, Strip Tinning Holdings stock appears to be undervalued.
The current stock price of £0.19 is trading 47.1% below its estimated GF Value™ of £0.35.
GuruFocus considers Strip Tinning Holdings to be Possible Value Trap.
Key valuation signals for LSE:STG:
5-Year RORE %: 7.18
GF Value™: £0.35 vs. price of £0.19 (47.1% below fair value)
Industry Position: 19.8% below the Vehicles & Parts median (#606 of 1155)
No single metric tells the full story. See the LSE:STG stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Strip Tinning Holdings PLC is as a holding company which manufactures automotive busbar, ancillary connectors and flexible printed circuits. Its activities are design and manufacture of a full suite of glazing connectors, Flexible Printed Circuits and Cell Contact Systems for Electric Vehicles. It has four product groups, all serving the automotive electrical connector market. Glazing segment is made up of Busbar and Connectors, whilst its Battery Technology (BT)segment contains Flexible Printed Circuits (FPC) and Cell Contacting Systems (CCS). The Battery Technology segment has other uses such as static battery storage and other adjacent markets. Its segments are Glazing, and EV. It generates majority of revenue from Glazing. It has presence in UK, Rest of Europe, and Rest of world.
30GF Score
Get the complete analysis for LSE:STG
5-Year RORE % is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
LSE:STG has been successfully added to your 
