Strip Tinning HoldingsLSE:STG 30 Quick Ratio is 0.75 as of Dec. 2025, which is 52% below its 10-year median of 1.57. GuruFocus rates LSE:STG with a GF Score™ of 30/100 and a GF Value™ of £0.35 (Possible Value Trap). The stock has 6 warning signs investors should review. Among 1,337 Vehicles & Parts companies, Strip Tinning Holdings ranks worse than 72.03% on this metric.
Strip Tinning Holdings has a quick ratio of 0.75. It indicates that the company cannot currently fully pay back its current liabilities.
The historical rank and industry rank for Strip Tinning Holdings's Quick Ratio or its related term are showing as below:
LSE:STG'
s Quick Ratio Range Over the Past 10 Years
Min: 0.75 Med: 1.57 Max: 2.11
Current: 0.75
During the past 9 years, Strip Tinning Holdings's highest Quick Ratio was 2.11. The lowest was 0.75. And the median was 1.57.
LSE:STG's Quick Ratio is ranked worse than 72.03% of 1337
companies
in the Vehicles & Parts industry
Industry Median: 1.06
vs LSE:STG: 0.75
Strip Tinning Holdings (LSE:STG) Quick Ratio Explanation
The quick ratio is more conservative than the Current Ratio because it excludes inventories from current assets. The ratio derives its name presumably from the fact that assets such as cash and marketable securities are quick sources of cash. Inventories generally take time to be converted into cash, and if they have to be sold quickly, the company may have to accept a lower price than book value of these inventories. As a result, they are justifiably excluded from assets that are ready sources of immediate cash.
In general, low or decreasing quick ratios generally suggest that a company is over-leveraged, struggling to maintain or grow sales, paying bills too quickly or collecting receivables too slowly. On the other hand, a high or increasing quick ratio generally indicates that a company is experiencing solid top-line growth, quickly converting receivables into cash, and easily able to cover its financial obligations. Such companies often have faster inventory turnover and cash conversion cycles.
The higher the quick ratio, the better the company's liquidity position.
Strip Tinning Holdings Quick Ratio Related Terms
Strip Tinning Holdings Quick Ratio Historical Data
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
For the Auto Parts subindustry, Strip Tinning Holdings's Quick Ratio, along with its competitors' market caps and Quick Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
Strip Tinning Holdings Quick Ratio vs Vehicles & Parts Industry
For the Vehicles & Parts industry and Consumer Cyclical sector, Strip Tinning Holdings's Quick Ratio distribution charts can be found below:
* The bar in red indicates where Strip Tinning Holdings's Quick Ratio falls into.
The quick ratio measures a company's ability to meet its short-term obligations with its most liquid assets. For this reason, the ratio excludes inventories from current assets.
Strip Tinning Holdings's Quick Ratio for the fiscal year that ended in Dec. 2025 is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Strip Tinning Holdings (LSE:STG) has a Quick Ratio of 0.75 as of Dec. 2025. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Strip Tinning Holdings and its competitors. This is 52% below median its historical median of 1.57. Over the past decade, Strip Tinning Holdings' Quick Ratio has ranged from 0.75 to 2.11. According to the industry distribution chart, Strip Tinning Holdings ranks #963 out of 1337 companies in the Vehicles & Parts industry, placing it in the top 72%.
Is Strip Tinning Holdings' Quick Ratio too high?
Strip Tinning Holdings' current Quick Ratio of 0.75 is 52% below median its 10-year median of 1.57. Over the past 10 years, this metric has ranged from a low of 0.75 to a high of 2.11. The Vehicles & Parts industry median Quick Ratio is 1.06. Strip Tinning Holdings' value of 0.75 is 29.2% below this industry median. Based on the distribution chart, Strip Tinning Holdings ranks #963 out of 1337 companies in the Vehicles & Parts industry, which is below the industry midpoint. Overall, Strip Tinning Holdings has a GF Score™ of 30/100 and is considered Possible Value Trap, reflecting its overall financial health beyond just this single metric.
How does Strip Tinning Holdings' Quick Ratio compare to ORLY and AZO?
According to the Vehicles & Parts industry distribution chart, Strip Tinning Holdings ranks #963 out of 1337 companies for Quick Ratio. This places Strip Tinning Holdings in the lower half of its industry. The industry median Quick Ratio is 1.06. Strip Tinning Holdings' value of 0.75 is 29.2% below this benchmark. Historically, Strip Tinning Holdings' own Quick Ratio has ranged from 0.75 to 2.11 over the past decade. While the company's 10-year median is 1.57 vs. the industry median of 1.06, Strip Tinning Holdings has consistently been below the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Quick Ratio for a Vehicles & Parts company?
The median Quick Ratio among Vehicles & Parts companies is 1.06, based on 1,337 companies in the industry. Companies in the top quartile (top 25%) have a Quick Ratio significantly above this median, while those in the bottom quartile fall well below. However, Quick Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. Strip Tinning Holdings's current Quick Ratio of 0.75 is 29.2% below the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Quick Ratio mean?
A high Quick Ratio can signal that a stock is expensive relative to its fundamentals. Quick ratio is the ratio of current assets less inventory to current liabilities. View historical data on Strip Tinning Holdings and its competitors. For the Vehicles & Parts industry, the median Quick Ratio is 1.06 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. Strip Tinning Holdings's current Quick Ratio is 0.75, which is 52% below median its own 10-year median of 1.57. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is Strip Tinning Holdings stock overvalued right now?
Based on GuruFocus' analysis, Strip Tinning Holdings (LSE:STG) is currently considered Possible Value Trap. The stock's GF Value™ is £0.35, compared to a current price of £0.18 — trading 50% below its estimated fair value. The current Quick Ratio is 0.75, which is 52% below median its 10-year median of 1.57 and 29.2% below the Vehicles & Parts industry median of 1.06. Strip Tinning Holdings' overall GF Score™ is 30/100 with 6 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Quick Ratio calculated?
Quick Ratio is calculated from a company's financial statements. For Strip Tinning Holdings (LSE:STG), the current Quick Ratio is 0.75 as of Dec. 2025. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is Strip Tinning Holdings (LSE:STG) Overvalued in 2026?
Based on GuruFocus' analysis, Strip Tinning Holdings stock appears to be undervalued.
The current stock price of £0.18 is trading 50% below its estimated GF Value™ of £0.35.
GuruFocus considers Strip Tinning Holdings to be Possible Value Trap.
Key valuation signals for LSE:STG:
Quick Ratio: 0.75 (52% below median its 10-year median of 1.57)
GF Value™: £0.35 vs. price of £0.18 (50% below fair value)
Industry Position: 29.2% below the Vehicles & Parts median (#963 of 1337)
No single metric tells the full story. See the LSE:STG stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
Strip Tinning Holdings PLC is as a holding company which manufactures automotive busbar, ancillary connectors and flexible printed circuits. Its activities are design and manufacture of a full suite of glazing connectors, Flexible Printed Circuits and Cell Contact Systems for Electric Vehicles. It has four product groups, all serving the automotive electrical connector market. Glazing segment is made up of Busbar and Connectors, whilst its Battery Technology (BT)segment contains Flexible Printed Circuits (FPC) and Cell Contacting Systems (CCS). The Battery Technology segment has other uses such as static battery storage and other adjacent markets. Its segments are Glazing, and EV. It generates majority of revenue from Glazing. It has presence in UK, Rest of Europe, and Rest of world.
30GF Score
Get the complete analysis for LSE:STG
Quick Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
LSE:STG has been successfully added to your 
