LSI IndustriesSTU:LS2 -0.93%86 Cyclically Adjusted PB Ratio is 3.52 as of Jul. 09, 2026, which is 167% above its 10-year median of 1.32. GuruFocus rates STU:LS2 with a GF Score™ of 86/100 and a GF Value™ of €17.08 (Modestly Overvalued). The stock has 8 warning signs investors should review. Among 1,980 Hardware companies, LSI Industries ranks worse than 64.8% on this metric.
The historical rank and industry rank for LSI Industries's Cyclically Adjusted PB Ratio or its related term are showing as below:
STU:LS2'
s Cyclically Adjusted PB Ratio Range Over the Past 10 Years
Min: 0.41 Med: 1.32 Max: 3.77
Current: 3.52
During the past years, LSI Industries's highest Cyclically Adjusted PB Ratio was 3.77. The lowest was 0.41. And the median was 1.32.
STU:LS2's Cyclically Adjusted PB Ratio is ranked worse than 64.8% of 1980
companies
in the Hardware industry
Industry Median: 2.21
vs STU:LS2: 3.52
The Shiller PE Ratio was first used by professor Robert Shiller. He uses E10 for his Shiller PE Ratio calculation. E10 is the average of the inflation adjusted earnings per share of a company over the past 10 years. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PB Ratio. The Cyclically Adjusted Book per Share is the average of the inflation adjusted book value per share of a company over the past 10 years.
LSI Industries's adjusted book value per share data for the three months ended in Mar. 2026 was €8.316. Add all the adjusted book value per share for the past 10 years together and divide the count will get our Cyclically Adjusted Book per Share, which is €6.03 for the trailing ten years ended in Mar. 2026.
Shiller PE for Stocks: The True Measure of Stock Valuation
LSI Industries (STU:LS2) Cyclically Adjusted PB Ratio Explanation
Compared with the regular PB Ratio, which works poorly for cyclical businesses, the Cyclically Adjusted PB Ratio smoothed out the fluctuations of book value during business cycles. Therefore it is more accurate in reflecting the valuation of the company.
If a company has consistent business performance, the Cyclically Adjusted PB Ratio should give similar results to regular PB Ratio.
LSI Industries Cyclically Adjusted PB Ratio Related Terms
LSI Industries Cyclically Adjusted PB Ratio Historical Data
* Premium members only.
The historical data trend for LSI Industries's Cyclically Adjusted PB Ratio can be seen below:
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
STU:LS2 vs DAKT, LPTH, KOPN: Cyclically Adjusted PB Ratio Comparison
For the Electronic Components subindustry, LSI Industries's Cyclically Adjusted PB Ratio, along with its competitors' market caps and Cyclically Adjusted PB Ratio data, can be viewed below:
* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.
LSI Industries Cyclically Adjusted PB Ratio vs Hardware Industry
For the Hardware industry and Technology sector, LSI Industries's Cyclically Adjusted PB Ratio distribution charts can be found below:
* The bar in red indicates where LSI Industries's Cyclically Adjusted PB Ratio falls into.
LSI Industries Cyclically Adjusted PB Ratio Calculation
Like the Shiller PE Ratio, the Cyclically Adjusted PB Ratio takes the Book Value per Share from the past 10 years, adjusts it for inflation, and then calculates the average. This average is then used for the P/B calculation. Because it considers this 10-year average, it's often referred to as the CAPB Ratio.
The Shiller PE Ratio was first used by professor Robert Shiller to measure the valuation of the overall market. The similar calculation is applied by GuruFocus to calculate the Cyclically Adjusted PB Ratio.
LSI Industries's Cyclically Adjusted PB Ratio for today is calculated as
* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD. * For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.
Please note that we use the CPI data of the country/region where the company is headquartered. If the CPI data for that country/region is not available, then we will use the CPI data of the United States as default.
What does a Cyclically Adjusted PB Ratio of 3.52 mean?
LSI Industries (STU:LS2) has a Cyclically Adjusted PB Ratio of 3.52 as of Jul. 09, 2026. Cyclically Adjusted PB Ratio is the ratio of share price to a company's inflation-adjusted book value per share over a 10-year period. View historical data on LSI Industries and its competitors. This is 167% above median its historical median of 1.32. Over the past decade, LSI Industries' Cyclically Adjusted PB Ratio has ranged from 0.41 to 3.77. According to the industry distribution chart, LSI Industries ranks #1283 out of 1980 companies in the Hardware industry, placing it in the top 64.8%.
Is LSI Industries' Cyclically Adjusted PB Ratio too high?
LSI Industries' current Cyclically Adjusted PB Ratio of 3.52 is 167% above median its 10-year median of 1.32. Over the past 10 years, this metric has ranged from a low of 0.41 to a high of 3.77. The Hardware industry median Cyclically Adjusted PB Ratio is 2.21. LSI Industries' value of 3.52 is 59.3% above this industry median. Based on the distribution chart, LSI Industries ranks #1283 out of 1980 companies in the Hardware industry, which is below the industry midpoint. Overall, LSI Industries has a GF Score™ of 86/100 and is considered Modestly Overvalued, reflecting its overall financial health beyond just this single metric.
How does LSI Industries' Cyclically Adjusted PB Ratio compare to DAKT and LPTH?
According to the Hardware industry distribution chart, LSI Industries ranks #1283 out of 1980 companies for Cyclically Adjusted PB Ratio. This places LSI Industries in the lower half of its industry. The industry median Cyclically Adjusted PB Ratio is 2.21. LSI Industries' value of 3.52 is 59.3% above this benchmark. Historically, LSI Industries' own Cyclically Adjusted PB Ratio has ranged from 0.41 to 3.77 over the past decade. While the company's 10-year median is 1.32 vs. the industry median of 2.21, LSI Industries has consistently been above the industry average. See the competitive comparison table and distribution chart on this page for a detailed peer-by-peer breakdown.
What is a good Cyclically Adjusted PB Ratio for a Hardware company?
The median Cyclically Adjusted PB Ratio among Hardware companies is 2.21, based on 1,980 companies in the industry. Companies in the top quartile (top 25%) have a Cyclically Adjusted PB Ratio significantly above this median, while those in the bottom quartile fall well below. However, Cyclically Adjusted PB Ratio should not be evaluated in isolation — investors should consider it alongside profitability, growth, and financial strength metrics. LSI Industries's current Cyclically Adjusted PB Ratio of 3.52 is 59.3% above the industry median. Use the industry distribution chart on this page to see where any company falls relative to its peers.
What does a high Cyclically Adjusted PB Ratio mean?
A high Cyclically Adjusted PB Ratio can signal that a stock is expensive relative to its fundamentals. Cyclically Adjusted PB Ratio is the ratio of share price to a company's inflation-adjusted book value per share over a 10-year period. View historical data on LSI Industries and its competitors. For the Hardware industry, the median Cyclically Adjusted PB Ratio is 2.21 — values significantly above this may indicate overvaluation, while values below may suggest a bargain or underlying issues. LSI Industries's current Cyclically Adjusted PB Ratio is 3.52, which is 167% above median its own 10-year median of 1.32. However, context matters — high-growth companies often justify higher valuations. Always evaluate alongside other metrics like GF Score™ and GF Value™.
Is LSI Industries stock overvalued right now?
Based on GuruFocus' analysis, LSI Industries (STU:LS2) is currently considered Modestly Overvalued. The stock's GF Value™ is €17.08, compared to a current price of €21.20 — trading 24.1% above its estimated fair value. The current Cyclically Adjusted PB Ratio is 3.52, which is 167% above median its 10-year median of 1.32 and 59.3% above the Hardware industry median of 2.21. LSI Industries' overall GF Score™ is 86/100 with 8 warning signs to review. Investors should evaluate multiple metrics — including profitability, growth, and financial strength — before making a decision.
How is Cyclically Adjusted PB Ratio calculated?
Cyclically Adjusted PB Ratio is calculated from a company's financial statements. For LSI Industries (STU:LS2), the current Cyclically Adjusted PB Ratio is 3.52 as of Jul. 09, 2026. GuruFocus calculates this using data sourced from SEC filings and annual reports. See the calculation section and 30-year financial data on this page for the full breakdown.
Is LSI Industries (STU:LS2) Overvalued in 2026?
Based on GuruFocus' analysis, LSI Industries stock appears to be overvalued.
The current stock price of €21.20 is trading 24.1% above its estimated GF Value™ of €17.08.
GuruFocus considers LSI Industries to be Modestly Overvalued.
Key valuation signals for STU:LS2:
Cyclically Adjusted PB Ratio: 3.52 (167% above median its 10-year median of 1.32)
GF Value™: €17.08 vs. price of €21.20 (24.1% above fair value)
Industry Position: 59.3% above the Hardware median (#1283 of 1980)
No single metric tells the full story. See the STU:LS2 stock analysis page for a complete view including 30-year financials, guru trades, and insider activity.
LSI Industries Inc provides corporate visual image solutions to the petroleum and convenience store industry. The company's operating segments include Lighting and Display Solutions. It generates maximum revenue from the Display solutions segment. Lighting Segment manufactures and markets outdoor and indoor lighting and lighting controls for the commercial, industrial, and multi-site retail markets, including the petroleum/convenience store, quick-service, and automotive markets. The Display Solutions Segment manufactures, sells, and installs exterior and interior visual image and display elements, including printed graphics, structural graphics, digital signage, menu board systems, display fixtures, refrigerated displays, and custom display elements.
86GF Score
Get the complete analysis for STU:LS2
Cyclically Adjusted PB Ratio is just one metric. See GF Value™, 30-year financials, guru trades, warning signs, and more.
Quick Browse
Personalize
Premium Gurus 
Create New Portfolio
STU:LS2 has been successfully added to your 
